When using electrical appliances, basic safety precautions should
always be followed including the following:
1. Read all instructions.
2. To protect against risk of electrical shock do not put cord, plugs,
or appliance in water or other liquid.
3. Close supervision is necessary when any appliance is used by or
near children.
4. Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in any
manner. Contact Consumer Service for examination, repair or
electrical or mechanical adjustment
7. The use of attachments not recommended or sold by the
manufacturer may cause fire, electric shock or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter.
10.Do not let cord contact hot surface, including the stove.
11.Keep hands and utensils away from moving blades or discs while
processing food to reduce the risk of severe injury to persons or
damage to the food processor. A scraper may be used but must
be used only when the food processor is not running.
12.Blades are sharp. Handle carefully.
13.To reduce this risk of injury. Never places cutting blade or discs
on base without first putting bowl properly in place.
14.Be certain cover is securely locked in place before operating
appliance.
15.Never feed food by hand. Always use food pusher.
16.Do not attempt to defeat the cover interlock mechanism.
SAVE THESE INSTRUCTIONS
For Household Use Only.
1
ADDITIONAL IMPORTANT
SAFEGUARDS
1. All users of this appliance must read and understand this
Owner s Manual before operating or cleaning this appliance.
2. The cord of this appliance should be plugged into a 120V AC
electrical outlet only.
3. Do not leave this appliance unattended during use.
4. If this appliance begins to malfunction during use, immediately turn
the unit OFF and unplug the cord. Do not use or attempt to repair
the malfunctioning appliance.
5. If this appliance falls or accidentally becomes immersed in water,
unplug it immediately. Do not reach into the water! Do not use
this appliance after it has fallen into or becomes immersed in
water.
6. To reduce the risk of injury to persons or property, never use this
appliance in an unstable position.
7. Do not use this appliance for other than its intended use.
2
Polarized Plug
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electrical shock, this plug is intended to
fit into a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way.
Short Cord Instructions
A short power-supply cord is provided to reduce the risk resulting
from becoming entangled in or tripping over a longer cord.
Do not use an extension cord with this product.
Electric Power
If the electric circuit is overloaded with other appliances, your
appliance may not operate properly. It should be operated on a
seperate electrical circuit from other appliances.
Plasticizer Warning
CAUTION: To prevent Plasticizers from migrating from the finish of
the countertop, tabletop or other furniture, place NON-PLASTIC
coaster or placemats between the appliance and the finish of the
countertop, tabletop or other furniture.
Failure to do so may cause the finish to darken, permanent
blemishes may occur or stains can appear.
2. Wash Lid, Chopping Blade, Processing Bowl,
Food Chute, Shield, Food Pusher and Discs, in warm soapy
water. Rinse and dry thoroughly, see CARE AND CLEANING.
CAUTION: BLADES ARE SHARP, HANDLE WITH CARE.
CAUTION: DO NOT IMMERSE FOOD PROCESSOR BODY
IN WATER OR OTHER LIQUIDS.
Operating Instructions
How to Slice or Shred Food:
1.Attach the 8-Cup Processor Bowl to the
Food Processor Body by placing on Drive
Shaft. Turn 8-Cup Processor Bowl counterclockwise until it clicks into place. (See
Picture A)
NOTE: For Slicing or Shredding Food the
Chopping Blade is not needed.
2.Place the Discharge Disc onto the Drive Shaft. (See Picture B)
NOTE: The Discharge Disc is only used when processing out of
Continuous Flow Side Chute.
Picture A
Picture B
3.Place the Slicing/Shredding Disc on the Drive Shaft.
(See Above Picture B)
NOTE: Both sides of the Slicing/Shredding Disc indicate
which Function it will perform.
CAUTION: Use extreme care when handling the Slicing/Shredding
Disc. Do not touch the cutting edges with your fingers. The cutting
edge is very sharp and can cause injury if touched.
5
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.