Toastmaster RHHM16CAN User Manual

16 Speed Electronic
Hand Mixer
OWNER’S MANUAL
RHHM16 & RHHM16CAN
Additional Important
Safeguards
1. All users of this appliance must read and understand this Owner’s Manual before operating or cleaning this appliance.
2. The cord to this appliance should be plugged into a 110V/120V AC electrical outlet only.
3. Avoid electric shock by unplugging the Hand Mixer before cleaning.
4. Do not leave appliance unattended while it is operating.
5. Remove attachments from Mixer before washing them.
6. Be sure unit is completely assembled before using.
7. Turn unit off when finished using. Do not disassemble the unit until the motor comes to a complete stop.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
Introduction
Congratulations on your purchase of the Russell Hobbs®16 Speed Electronic Hand Mixer. Packed with power, this Hand Mixer boasts a full 240 Watts of power with 16 separate speeds—powerful enough to cut through a double batch of cookie dough with ease! The "easy-touch" up/down speed controls make your mixing tasks easy and comfortable.
A large, lighted, digital display features both a speed and mixing time read-out for precise mixing every time. And, don't worry about a quick start-up—this Mixer starts gently every time so you don't have to worry about splatter.
3
Before Using for the First Time
1. Carefully unpack Mixer.
2. Wash Beaters and Dough Hooks in warm, soapy water. Rinse well and dry thoroughly.
3. Wipe Mixer with a soft, clean cloth or sponge. Never immerse the Mixer in water or any other liquid.
HOW TO INSTALL YOUR MIXER ATTACHMENTS
CAUTION: Always unplug Mixer from outlet before installing or removing attachments. Use either both beaters or both dough hooks. Do not attempt to use a dough hook with a beater. This could damage the Mixer.
NOTE: The Left-hand Dough Hook and Beater have a small round metal washer collar around the top of their stems. The Right-hand Dough Hook and Beater have a hexagonal collar around the top of their stems. The attachment with the hex collar is to be inserted into the matching hole in the bottom of the Mixer. See Figure 1.
1. Unplug Mixer.
2. Choose attachment type. Do not attempt to use a beater
with a dough hook; use same type attachments only.
3. Push attachment stem into Mixer hole and rotate until it locks into position. See Figure 1. The attachment will fit snugly into the hole. Repeat for second attachment.
4. After installing attachment(s), gently tug on each attachment to be sure it is secure.
Hexagonal Hole Opening
Figure 1
5
Operating Instructions (Cont.)
MIXING GUIDE
Refer to the following mixing guide for speed selections. As you add ingredients, the consistency of the mixture can change. As this happens, it may be desirable to select a higher speed setting.
Speed 1
2-3 4 5-6 7 8 9-10 11 12 13 14 15 16
Function
Knead Fold Stir Blend Mix Combine Cake Mix Cream Frostings Whip Whip Potatoes Whip Cream Egg Whites
Use
Use to knead dough Use to start mixing or for "LOW" mixing recipes Use to stir liquids or gently moisten dry ingredients Use to blend ingredients or for a stronger knead Use to combine dry and liquid ingredients alternately Use to mix/blend all ingredients Use for cake mixes or for "MEDIUM" mixing recipes Use for creaming sugar and butter together Use to prepare light, fluffy frostings or candy Use to develop a light, fluffy texture Use to mash/whip cooked potatoes Use to whip cream Use when whipping egg whites or for "HIGH" mixing recipes
User Maintenance Instructions
This Russell Hobbs®RHHM16 Hand Mixer requires little mainte­nance. It contains no user-serviceable parts. Any servicing requiring disassembly must be performed by a qualified appliance repair technician.
CAUTION: Never immerse Mixer in Water or any other liq­uid.
1. Unplug Mixer: Firmly grasp the cord and press in on the Power Supply Cord Retract Button. Allow the Cord to slowly retract. If the cord cannot retract fully, pull it out and then retract again.
2. Eject mixer attachments from Mixer and wash attachments in warm water and a mild detergent or in the dishwasher. (Mixer attachments are dishwasher-safe.) Rinse and dry thoroughly.
3. Wipe exterior surface of Mixer with a damp cloth or sponge.
4.
Store in its original box in a cool, dry place.
7
Loading...