Tippmann US Army Carver One User Manual

ITEM

Carver One Parts List

NO. QTY. PT. NO. DESCRIPTION

1 1 TA06053 Right Receiver Half

2 1 TA06052 Left Receiver Half

3 4 98-33 Receiver Dowel Pin

4 1 CA-36 Sear Dowel Pin (Black)

5 1 02-35 Sear

6 1 TA02036 Sear Spring

7 2 TA02021 ACT Linkage Arm Guide Pin

8 1 FA-18 Ball Latch

9 1 TA06051 Feed Elbow

10 1 TA06059 Feed Elbow Thumb Nut

11 1 PL-42C Screw, ¼-20 x 1” SHCS

12 1 PL-42D Nut, ¼-20 Square (Black)

13 2 98-26 Screw, 10-32 x ¼” BHCS

14 4 CA-02A Screw, 6-32 x ⅜” BHCS

15 8 9-PA Nut, Hex 10-32 (Black)

16 1 TA06047 Lock Screw C-Clip

17 1 98-45 Flat Washer M6 (Black)

18 1 TA05004 Split Grip, Right

19 1 98-01A Bolt, 10-32 x 0.675”

20 2 98-19 Return Slide Dowel Pin

21 1 98-09C Gas Line, #4 x 7⅞ ”

22 1 TA06003 Split Grip, Left

23 1 TA06048 Screw, 10-32 x 1.1875” BHCS

24 1 TA06057 US Army Jewel

25 3 TA06015 Screw, 10-32 x 0.840” LHSHCS

26 4 TA09919 Screw, 10-32 x 0.500” LHSHCS

29 1 TA06049 Air Supply Adapter (ASA)

30 1 CA-08B Nut, 10-32

31 1 TA06056 CARVER ONE Nameplate

32 1 CA-14 Drive Spring

33 1 CA-15 Guide Pin

34 1 SL2-4 O-ring, Front Bolt

35 1 TA02011 Rear Bolt

36 1 TA01016 Linkage Arm

37 1 98-57 O-ring, End Cap

38 1 98-40 O-ring, Barrel

39 1 CA-27 Front Valve Seat

40 1 PA-28 Valve Stem Cup Seal

41 1 CA-29 Valve Stem Cup

42 2 SL2-25 O-ring, Valve Seat

43 1 98-25N Valve Body

44 1 98-56 Valve Plug

45 1 CA-30N Valve Stem

46 1 98-32 Compression Spring

47 1 PA-31A Snap Ring

48 1 98-21NR Power Tube

49 1 02-17 Front Bolt

50 1 TA05021 Power Tube Plug

51 1 02-22 Velocity Set Screw

52 1 TA05005 Rear Bolt Plug

53 1 98-13 Rear Bolt Handle

54 1 TA06046 Barrel

55 1 TA06060 O-ring, Barrel Sleeve

56 1 TA06017 End Cap Cover

57 1 TA06006 End Cap

58 2 98-12A O-ring, Valve/Rear Bolt

59 1 98-36A Trigger

60 1 98-18 Trigger Return Slide

61 2 98-20 Spring

62 1 98-37N Safety Pin

63 1 98-55 O-ring, Safety (Red)

64 1 FA-07 O-ring, Safety (Black)

Revised 01/26/10