Texas Instruments TL5501CN, TL5501CDWAR, TL5501CDWA Datasheet
TL5501
6-BIT ANALOG-TO-DIGITAL CONVERTER
SLAS026 – OCTOBER 1989 – REVISED APRIL 1990
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D
6-Bit Resolution
D
Linearity Error... ±0.8%
D
Maximum Conversion Rate...30 MHz Typ
D
Analog Input Voltage Range
V
CC
to VCC – 2 V
D
Analog Input Dynamic Range...1 V
D
TTL Digital I/O Level
D
Low Power Consumption
200 mW Typ
D
5-V Single-Supply Operation
D
Interchangeable With Fujitsu MB40576
description
The TL5501 is a low-power ultra-high-speed video-band analog-to-digital converter that uses the Advanced
Low-Power Schottky (ALS) process. It utilizes the full-parallel comparison (flash method) for high-speed
conversion. It converts wide-band analog signals (such as a video signal) to a digital signal at a sampling rate
of dc to 30 MHz. Because of this high-speed capability , the TL5501 is suitable for digital video applications such
as digital TV, video processing with a computer, or radar signal processing.
The TL5501 is characterized for operation from 0°C to 70°C.
functional block diagram
D0 (LSB)
D1
D2
D3
D4
D5 (MSB)
EN
Latch
and
Buffer
63-to-6
Encoder
CLK
ANLG INPUT
REFT
REFB
63
62
2
1
R
R
R
R
R
Copyright 1990, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
(LSB) D0
D1
D2
D3
D4
(MSB) D5
CLK
GND
GND
DGTL V
CC
ANLG V
CC
REFB
ANLG INPUT
REFT
ANLG V
CC
DGTL V
CC
N PACKAGE
(TOP VIEW)
TL5501
6-BIT ANALOG-TO-DIGITAL CONVERTER
SLAS026 – OCTOBER 1989 – REVISED APRIL 1990
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
equivalents of analog input circuit
ANLG V
CC
V
I
D
r
i
V
refB
(see Note A)
C
i
I
bias
ANLG GND
ANLG V
CC
V
I
NOTE A: Ci– nonlinear emitter-follower junction capacitance
ri– linear resistance model for input current transition caused by comparator switching.
VI < V
refB
: Infinite; CLK high: infinite.
V
refB
– voltage at REFB terminal
I
bias
– constant input bias current
D – base-collector junction diode of emitter-follower transistor
equivalent of digital input circuit
V
ref
= 1.4 V
Output
25 k
Ω3.1 kΩ25 kΩ
GND
V
I
DGTL V
CC
TL5501
6-BIT ANALOG-TO-DIGITAL CONVERTER
SLAS026 – OCTOBER 1989 – REVISED APRIL 1990
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
FUNCTION TABLE
STEP
ANALOG INPUT
VOLTAGE
DIGITAL OUTPUT CODE
0 3.992 V L L L L L L
1 4.008 V L LL LLH
| | |
31 4.488 V L HH HHH
32 4.508 V H LL LLL
33 4.520 V H LL LLH
| | |
62 4.984 V H HH HHL
63 5.000 V H H H H H H
†
These values are based on the assumption that V
refB
and V
refT
have been
adjusted so that the voltage at the transition from digital 0 to 1 (VZT) is
4.000 V and the transition to full scale (VFT) is 4.992 V . 1 LSB = 16 mV.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, ANLG VCC (see Note 1) –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supply voltage range, DGTL V
CC
–0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range at digital input, V
I
–0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range at analog input, V
I
–0.5 V to ANLG VCC +0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Analog reference voltage range, V
ref
–0.5 V to ANLG V
CC
+0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range –55°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTE 1: All voltage values are with respect to the network ground terminal.
recommended operating conditions
MIN NOM MAX UNIT
Supply voltage, ANLG V
CC
4.75 5 5.25 V
Supply voltage, DGTL V
CC
4.75 5 5.25 V
High-level input voltage, V
IH
2 V
Low-level input voltage, V
IL
0.8 V
Input voltage at analog input, VI (see Note 2) 4 5 V
Analog reference voltage (top side), V
refT
(see Note 2) 4 5 5.1 V
Analog reference voltage (bottom side), V
refB
(see Note 2) 3 4 4.1 V
High-level output current, I
OH
–400 µA
Low-level output current, I
OL
4 mA
Clock pulse duration, high-level or low-level, t
w
25 ns
Operating free-air temperature, T
A
0 70 °C
NOTE 2: V
refB
< VI < V
refT
, V
refT
– V
refB
= 1 V ±0.1 V.
Loading...