NE5532, NE5532A, NE5532I, NE5532AI
DUAL LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS075A – NOVEMBER 1979 – REVISED SEPTEMBER 1990
OUT
V
CC–
IN–
IN+
P PACKAGE
(TOP VIEW)
1
2
3
4
V
8
CC+
OUT
7
IN–
6
IN+
5
D
Equivalent Input Noise Voltage
5 nv/√Hz
D
Unity-Gain Bandwidth...10 MHz Typ
D
Common-Mode Rejection Ratio
Typ at 1 kHz
100 dB Typ
D
High DC Voltage Gain...100 V/mV Typ
D
Peak-to-Peak Output Voltage Swing
32 V Typ With V
R
= 600 Ω
L
D
High Slew Rate...9 V/µs Typ
D
Wide Supply Voltage Range...±3 V
= ±18 V and
CC±
to ±20 V
D
Designed to Be Interchangeable With
Signetics NE5532 and NE5532A
description
The NE5532 and NE5532A are monolithic high-performance operational amplifiers combining excellent dc and
ac characteristics. They feature very low noise, high output drive capability, high unity-gain and
maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output
short-circuit protection. These operational amplifiers are internally compensated for unity-gain operation. The
NE5532A has specified maximum limits for equivalent input noise voltage.
The NE5532 and NE5532A are characterized for operation from 0°C to 70°C. The NE5532I and NE5532AI are
characterized for operation from –40°C to 85°C.
symbol (each amplifier)
IN+
IN–
+
OUT
–
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Copyright 1990, Texas Instruments Incorporated
1
NE5532, NE5532A, NE5532I, NE5532AI
DUAL LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS075A – NOVEMBER 1979 – REVISED SEPTEMBER 1990
schematic (each amplifier)
36 pF
V
CC+
IN+
IN–
460 Ω
Component values shown are nominal.
37 pF
14 pF
7 pF
15
OUT
15 Ω
V
Ω
CC–
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, V
Supply voltage, V
Input voltage, either input (see Notes 1 and 2) V
Input current (see Note 3) ±10 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Duration of output short circuit (see Note 4) unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range: NE5532, NE5532A 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between V
2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage.
3. Excessive input current will flow if a differential input voltage in excess of approximately 0.6 V is applied between the inputs unless
some limiting resistance is used.
4. The output may be shorted to ground or either power supply. Temperature and/or supply voltages must be limited to ensure the
maximum dissipation rating is not exceeded.
(see Note 1) 22 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC+
(see Note 1) –22 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC–
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NE5532I, NE5532AI –40°C to 85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC+
and V
CC–
.
CC±
DISSIPATION RATING TABLE
PACKAGE
P 1000 mW 8 mW/°C 640 mW 520 mW
2
TA ≤ 25°C
POWER RATING
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
OPERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
VIOInput offset voltage
V
0
mV
IIOInput offset current
nA
IIBInput bias current
nA
V
OPP
g
R
L
600 Ω
V
L
,
A
gg g
V/mV
L
,
BOMMaximum-output-swing bandwidth
kH
PARAMETER
TEST CONDITIONS
UNIT
VnEquivalent input noise voltage
V/√H
InEquivalent input noise current
pA/√Hz
recommended operating conditions
Supply voltage, V
Supply voltage, V
CC+
CC–
NE5532, NE5532A, NE5532I, NE5532AI
DUAL LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS075A – NOVEMBER 1979 – REVISED SEPTEMBER 1990
MIN NOM MAX UNIT
5 15 V
–5 –15 V
electrical characteristics, V
PARAMETER TEST CONDITIONS
p
p
p
V
A
B
r
i
z
CMRR Common-mode rejection ratio VIC = V
k
I
OS
I
CC
†
All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range for
TA is 0°C to 70°C for NE5532/NE5532A and –40°C to 85°C for NE5532I/NE5532AI.
Common-mode input voltage range ±12 ±13 V
ICR
Maximum peak-to-peak output voltage
swing
Large-signal differential voltage
VD
amplification
Small-signal differential voltage
vd
amplification
p
Unity-gain bandwidth RL = 600 Ω, CL = 100 pF 10 MHz
1
Input resistance 30 300 kΩ
Output impedance AVD = 30 dB, RL = 600 Ω, f = 10 kHz 0.3 Ω
o
Supply voltage rejection ratio
SVR
(∆V
Output short-circuit current 38 mA
Total supply curent VO = 0, No load 8 16 mA
Crosstalk attenuation (VO1/VO2) V01 = 10 V peak, f = 1 kHz 110 dB
CC±
/∆VIO)
= +15 V, TA = 25°C (unless otherwise noted)
CC
±
†
=
O
TA = 25°C 10 150
TA = Full range 200
TA = 25°C 200 800
TA = Full range 1000
≥
R
≥ 600 Ω,
VO = ±10 V
R
≥ 2 kΩ,
VO = ±10 V
f = 10 kHz 2.2 V/mV
RL = 600 Ω VO = ±10 V 140
min 70 100 dB
ICR
V
= ±9 V to ±15 V, VO = 0 80 100 dB
CC±
TA = 25°C 0.5 4
TA = Full range 5
V
= ±15 V
CC±
V
= ±18 V 30 32
CC±
TA = 25°C 15 50
TA = Full range 10
TA = 25°C 25 100
TA = Full range 15
V
= ±18 V, VO = ±14 V 100
CC±
MIN TYP MAX UNIT
24 26
z
operating characteristics, V
SR Slew rate at unity gain 9 9 V/µs
Overshoot factor
= ±15 V, TA = 25°C
±
CC
NE5532/NE5532I NE5532A/NE5532AI
MIN TYP MAX MIN TYP MAX
VI = 100 mV,
RL = 600 Ω,
p
p
f = 30 Hz 8 8 10
f = 1 kHz 5 5 6
f = 30 Hz 2.7 2.7
f = 1 kHz 0.7 0.7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
AVD = 1,
CL = 100 pF
10% 10%
n
z
p
3
IMPORTANT NOTICE
T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERT AIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICA TIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERST OOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1998, Texas Instruments Incorporated
Loading...