Taylor-Wharton CGA Fitting Restraint Kit User Manual

CGA Fitting Restraint Kit

V

TW-319

Note: Highlight appropriate row

Part Number

XL50-9C50
XL50-9C51

XL50-9C52

Gas Service

Nitrogen or Argon

Oxygen

Carbon-Dioxide or Nitrogen-Oxide

Installation Instructions

1. Select appropriate restraint for CGA fitting. Restraint washer should fit CGA fitting closely.

2. Place restraint washer over the appropriate CGA fitting.

3. Wrap resistant cable around valve stern.

4. Attach free end of cable with lock as shown above.

5. Push clasp firmly into lock body to secure.

Kits include the following parts:

Service Kit P/N

Nitrogen or Argon

Oxygen

Carbon Dioxide or

Nitrous Oxide

XL50-9C50

XL50-9C51

XL50-9C52

set

set

set

Vent Valve Liquid Valve Use Valve

ent Restraint

P/N

7114-0115 7114-0115 7114-0117

7114-0116 7114-0116 7114-0116

7114-0115 7114-0116

T aylor-Wharton

4075 Hamilton Blvd.
Theodore, AL 36590
Phone: [phone]
In the US or Candada: (800)TW T ANKS (898-

2657)
Fax: [phone]

Liquid Restraint P/N Use Restraint P/N

7114-0116