Taylor QS23 Specifications

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

QS23

Item No.

_______________________________

QS23

Cook-to-order menu items are served FAST!! With the
optional platen(s) lowered, the top and bottom of the product
are cooked simultaneously. Foods maintain natural juiciness,
and your customers are served food hot off the grill, in less
than half the time of standard grills.

Even temperatures across the entire cooking surface assures
safe product integrity and fast recovery. Holding cooked food
products for busy times is virtually unnecessary, reducing
product waste. Multiple grills may be installed side-by-side
to increase cooking surface and capacities.

Lower Cooking Surface

Two, 12” (30.5 cm) wide, by 24” (61.0 cm) deep cooking zones with
three independent heating elements per zone. Assures even
temperatures and quick recovery.

Controls

Programmable microprocessor controls make menu selection
simple. Includes a self-diagnostic feature for serviceability. Clear
plastic door protects control from splashes or spills. Separate
durable start button is provided to activate cooking cycle.

Temperature Control

Grill surface temperature may be set from 150 to 400ºF (65 to
205ºC). Optional upper platen temperature may be set from 150 to
425ºF (65 to 218ºC).

Indicator Lights

Lights illuminate when heaters are on.

Features

Electric Grill

Shown with two platens (optional)

Optional grooved lower cooking

surface and/or grooved upper

platen

Weights lbs. kgs.

Net 405 183.7
Crated 531 240.9

cu. ft. cu. m.

Volume 38.0 1.07

Weights shown are for single platen. Add 84 lbs (38.6 kgs) for
second platen, or subtract for no platens.

QS23

QS23Electric Grill

Electrical

One dedicated electrical connection is required. See the Electrical chart for
the proper electrical requirements.

Clearance

Grill clearance must be maintained at least 3” (76 mm) from all combustible
materials, and 3” (76 mm) of air clearance in the rear.

Taylor Company,

A Division of Carrier Commercial Refrigeration, Inc.
Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

Printed in U.S.A.

Dimensions in. mm.

Width 24-3/16 615
Depth 36-3/16 615
Height 38-3/8 975
Floor Clearance 6-3/16 158

*Mounted on standard casters

 Grease Tray Drain
 Grooved Lower Cooking Surface
 Upper Platen, Grooved Cooking Surface
 Upper Platen, Smooth Cooking Surface
 Utility box for grill scraper & release sheet wiper

Upper Platen

Each upper platen has a cooking surface of 11” X 20” (279 X 508 mm) with
three individually controlled heaters. An infinite gap adjustment will
accommodate varying product thicknesses from zero to 7/8” (22 mm).

Release Material

Completely covers and protects upper platen surface, prevents product from
sticking and minimizes carbon build-up. Attachment method ensures that the
release material stays in place throughout the day for easy cleaning.

Options

Specifications

059217-ADV

1/09

Continuing research results in steady improvements; therefore, these

specifications are subject to change without notice.

Bidding Specs

Electrical: Volt ___________________ Hz__________ ph _________

Neutral:  Yes No

Options:_________________________________________________
_________________________________________________________

Electrical Total Total Requires
Amps KW 60 Amp Cord

208/60/3 with One Platen 42 15.0 IEC309-1 & 2
208/60/3 with Two Platens 53 19.2 IEC309-1 & 2
230/400/50/3N~ with Two Platens 28 19.2 IEC309-1 & 2

This unit may be manufactured in other electrical characteristics. Refer to the
local Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the unit.)