Tascam CD-01UPro, CD-01 U User Manual
OWNER’S MANUAL
CD-01U /CD-01UPro
CD PLAYER
D00864010A
»
˛
OImportant Safety Precautions
2 TASCAM CD-01U/CD-01UPro
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol, within equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This appliance has a serial number located on the rear panel. Please record the
model number and serial number and
retain them for your records.
Model number
Serial number
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
TO THE USER
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case the
user will be required to correct the interference at his
own expense.
CAUTION
Changes or modifications to this equipment not
expressly approved by TEAC CORPORATION for
compliance could void the user's authority to operate
this equipment.
For the customers in Europe
WARNING
This is a Class A product. In a domestic environment,
this product may cause radio interference in which
case the user may be required to take adequate
measures.
Pour les utilisateurs en Europe
AVERTISSEMENT
Il s'agit d'un produit de Classe A. Dans un environnement domestique, cet appareil peut provoquer des
interférences radio, dans ce cas l'utilisateur peut être
amené à prendre des mesures appropriées.
Für Kunden in Europa
Warnung
Dies ist eine Einrichtung, welche die Funk-Entstörung
nach Klasse A besitzt. Diese Einrichtung kann im
Wohnbereich Funkstörungen versursachen; in diesem
Fall kann vom Betrieber verlang werden,
angemessene Maßnahmen durchzuführen und dafür
aufzukommen.
For U.S.A.
CE Marking Information
a) Applicable electromagnetic environment: E4
b) Peak inrush current: 5.2 A
OImportant Safety Instructions
TASCAM CD-01U/CD-01UPro 3
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accor-
dance with the manufacturer's instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tipover.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
• Do not expose this apparatus to drips or splashes.
•Do not place any objects filled with liquids, such as
vases, on the apparatus.
• Do not install this apparatus in a confined space such as
a book case or similar unit.
• The apparatus draws nominal non-operating power from
the AC outlet with its POWER switch in the off position.
• The apparatus should be located close enough to the AC
outlet so that you can easily grasp the power cord plug at
any time.
• An apparatus with Class I construction shall be connected to an AC outlet with a protective grounding connection.
OSafety InformationSafety Information
4 TASCAM CD-01U/CD-01UPro
This product has been designed and manufactured
according to FDA regulations "title 21, CFR, chapter
1, subchapter J, based on the Radiation Control for
Health and Safety Act of 1968", and is classified as a
class 1 laser product. There is no hazardous invisible
laser radiation during operation because invisible
laser radiation emitted inside of this product is completely confined in the protective housings.
The label required in this regulation is shown 1.
Optical pickup:
Type: KSM-900AAA
Manufacturer: SONY Corporation
Laser output: Less than 0.5 mW on the objec-
tive lens
Wavelength: 775 to 815 nm
CAUTION
• DO NOT REMOVE THE PROTECTIVE HOUSING
USING A SCREWDRIVER.
• USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
• IF THIS PRODUCT DEVELOPS TROUBLE, CONTACT YOUR NEAREST QUALIFIED SERVICE PERSONNEL, AND DO NOT USE THE PRODUCT IN
ITS DAMAGED STATE.
Table of contents
1 - Introduction
Supplied accessories ..................................6
Environmental considerations .....................6
Some notes and precautions ..........................6
Beware of condensation .....................6
Back up memory .................................6
Rack - mounting the unit .......................7
Handling of compact discs ...........................7
2 - Remote control unit
Some notes and precautions .......................8
Batteries ........................................................8
Inserting batteries .....................................8
3 - Connections
Audio equipment .......................................9
Connecting analog audio equipment ...........9
Connecting digital audio equipment ..........9
Power source ................................................9
4 - Features and their functions
Front panel ..................................................10
Display .......................................................11
Rear Panel ...................................................12
Remote Control Unit ..................................12
5 - Menu operation
Menu configuration ...................................14
Menu operation .........................................14
Operation basics .........................................14
6 - Playback
Discs for playback .......................................15
About finalization .......................................15
For MP3 CDs ............................................15
Playback modes ..........................................16
Basic playback operation ...........................16
Using headphones .......................................16
Track selection ............................................16
Selecting by track number .......................17
Search ..........................................................17
Frame search ...................................17
7 - Advanced operations
Auto Cue ......................................................18
Auto Ready .................................................18
Resume .........................................................18
Call ....................................................................18
Incremental play ..................................................19
Repeat playback .........................................19
A to B repeat playback ...............................19
Intro check .......................................................20
Output in monaural ..............................................20
Power on play ................................................20
Pitch control ..................................................20
Changing the playback speed without changing
the key (Key original) ...................21
Program playback .......................................21
Editing a programmed track ......................21
Adding a track to the program .................21
Deleting a programmed track ....................22
Fade in and fade out .......................................22
Relay play ................................................22
Time display switching ..............................23
End of disc/track warning ......................................23
Eject block .............................................23
Fader start/Event start ..............................23
Fader start/stop .....................................23
Event start ...........................................24
Restoring factory default settings ...................24
External parallel control ........................................24
8 - Specifications
Specifications ........................................................25
Dimensional drawing ................................26
Error Messages ...........................................26
TASCAM CD-01U/CD-01UPro 5
1 - Introduction
ŒŒ
Environmental considerations
Thank you for your purchase of the TASCAM CD01U/CD-01U Pro CD player.
Before connecting and using the unit, please take time
to read this manual thoroughly to ensure you understand how to properly set up and connect the
CD-01U/CD-01U Pro, as well as the operation of its
many useful and convenient functions. After you have
finished reading this manual, please keep it in a safe
place for future reference.
Supplied accessories
In addition to this manual, the CD-01U/CD-01U Pro
have been packed with the following:
≠ RC-01UC remote control unit
≠ 2 AAA batteries
≠ Power cord
≠ Rack-mounting kit
≠ Warranty document
Should any of these items be missing, or if you
encounter any damage, please contact your TASCAM
supplier.
This unit was packed in its carton with special materials
in order to prevent any damage during shipment.
Please save the carton and packing materials in the
event you need to transport the unit in the future.
Environmental considerations
The CD-01U/CD-01U Pro may be used in most places,
but to maintain top performance and prolong operating
life, do not place it in the following locations.
≠ On an unsteady surface, or where there is frequent
vibration or resonance
≠ Near a window or where it can be exposed to direct
sunlight
≠ Near heating or air conditioning vents, or in very hot or
cold places
≠ Places with high humidity or poor ventilation
≠ Next to tuners, televisions or video decks, as this
could cause noise or affect video images
Some notes and precautions
Connect the CD-01U/CD-01U Pro only to the specified
power source.
When unplugging the cord, grasp the plug itself.
Clean only with a dry cloth. Do not use benzene, paint
thinner or other agents that could damage the surface.
Dust or grime on the top cover can be removed with a
soft cloth lightly moistened with a diluted mild detergent
solution.
Beware of condensation
If the unit is moved from a cold to a warm place, or
used after a sudden temperature change, condensation
inside the unit may occur, resulting in moisture on the
internal mechanism or an inserted disc, thus impairing
proper operation.
Should this occur, leave the player turned on for one or
two hours so that the condensation can evaporate
before you begin operation.
Also, please remove all discs from the unit if it will be
moved, or not operated for an extended period of time.
6 TASCAM CD-01U/CD-01UPro
Even when the power is turned off, the following settings are retained.
≠ Playback mode
≠ Time display mode
≠ Auto ready ON/OFF
≠ Auto cue ON/OFF
≠ Pitch control value
≠ All menu settings
Backup Memory
1 - Introduction
ŒŒ
Environmental considerations
The CD-01U/CD-01U Pro have been designed for the
playback of CD-DA format discs and MP3 files recorded in ISO9660 format. In addition to ordinary 5-inch and
3-inch CDs, it can also play properly recorded CD-R
and CD-RW discs.
When removing a CD from its case, press down on the
center of the disc holder to free the CD, then lift the disc
out, holding it carefully by the edges.
≠ Removing a disc
≠ Hold the CD like this
≠ Avoid getting fingerprints on the signal side (opposite
the label side). When cleaning, wipe gently with a soft
cloth from the center towards the outside edge. Dust
and grime may cause skipping, so keep discs clean
and store them in their cases when not being played.
≠ Do not use any record spray, anti-static solutions,
benzene, paint thinner or other chemical agents to
clean CDs as they could damage the delicate playing
surface.
≠ Discs should be returned to their cases after use to
avoid serious scratches that could cause the laser
pickup to skip.
≠ Keep discs away from direct sunlight, and places of
high heat and humidity. If left in such places, warping
could result.
≠ Do not affix any labels or stickers to the label side of
the disc. Do not write on the disc with a ballpoint
pen.
≠ Please do not insert discs that have adhesive remain-
ing from tape or stickers that have been removed. If
they are inserted into the player, they could stick to
the internal mechanism, requiring removal by a technician.
≠ Only use circular compact discs. Avoid using non-cir
cular promotional, etc. discs.
≠ The CD-01U/CD-01U Pro cannot play unfinalized
CD-R/RW discs.
≠ Do not use a C-thru disc.
The unit does not support a C-thru disc. Therefore,
you may not be able to insert a C-thru disc or may
not be able to remove a C-thru disc that has been
successfully inserted to the unit.
In the latter case, try to press the DISPLAY and
EJECT keys simultaneously, which may solve the
problem.
≠ Do not use the DualDisc. DualDisc is two-sided play-
back only discs. Insertion or ejection of a DualDisc
into/from CD-01U/CD-01U Pro is likely to cause
scratches to the surface of the DualDisc. Scratched
discs may not play in CD products.
A DualDisc may not play in CD-01U/CD-01U Pro and
a DualDisc could get stuck in and may not be able to
be removed from the CD-01U/CD-01U Pro.
Handling of compact discs
TASCAM CD-01U/CD-01UPro 7
Use the rack-mounting kit to mount the unit in a
standard 19-inch equipment rack, as shown below.
Remove the feet of the unit before mounting.
If you are mounting the unit in a rack, leave 1U of
space above it and 10cm (4 in) or more of space at
the rear. The CD-01U/CD-01U Pro can be mounted
in any angle between 0 to 90 degrees.
SeeEnvironmental considerationson the previous page.
Rack-mounting the unit
2 - Remote control unit
Some notes and precautions
≠ When the remote control will not be used for an
extended period of time, please remove the batteries
to prevent the possibility of battery acid leakage
which could damage the unit.
Should leakage occur, remove and discard the batteries, and wipe the battery case thoroughly with a
cloth.
Avoid getting the battery liquid on the skin. After
cleaning, replace with new batteries.
≠ The remote control functions by using an infrared
light signal. When using the unit to control the CD01U/CD-01U Pro, other devices that are turned on
could be operated by its signal.
≠ If the range of remote operation becomes smaller, or
commands do not always function properly, the batteries have become weak and should be replaced.
Always replace both batteries with new batteries of
the same type.
≠ Point the remote control to the remote sensor on the
main unit.
Do not obstruct the path between the remote control
and the remote sensor.
Batteries
If batteries are used improperly, or if leakage or breakage occurs, the unit will not function.
Please observe the cautions indicated on the batteries
and their packaging to ensure proper usage.
≠ Confirm + and - polarity and follow the indications
when inserting new batteries into the remote control.
≠ Do not use old and new batteries together.
≠ Even if the battery is the same size, the voltage may
differ.
Do not use batteries of different specifications
together.
≠ Do not attempt to recharge batteries that are non-
rechargeable.
≠ Do not open or disassemble batteries, throw them
into a fire or put them in water.
Inserting batteries
1. Open the lid.
2. Confirm +/- polarity, and insert two AAA batteries.
3. Close the lid.
7 m
8 TASCAM CD-01U/CD-01UPro
3 - Connections
Before connecting the CD-01U/CD-01U Pro to other units, please read their operation manuals thoroughly to ensure
proper connection. Turn the power on only after all connections have been made.
Audio equipment
Connecting analog audio equipment
Connect analog stereo amplifiers, mixers and recorders
to the analog line outputs.
≠ Connection cables are not supplied with this unit.
≠ Do not bundle the pin connection cords with the
power cord as noise or diminished sound quality
could result.
Connecting digital audio equipment
Digital stereo amplifiers, mixers and recorders can be
connected through the optical digital output terminal.
Power source
This unit has been designed to operate on the specified
power voltage only.
Do not plug the power cord into outlets of any other
voltage.
TASCAM CD-01U/CD-01UPro 9
Loading...