Tascam 2488 User Manual
2488 v1.00 error and status messages
If you are using a 2488 with the version 1.00 operating system (as shown when you power up the unit),
use the left column to look up the error message, and
then use the number (“No.”) in the center column to
cross-reference this message to the version 1.01 messages in the table in the Reference Manual. The right
column presents the version 1.01 equivalent for reference purposes,
v1.00 No. v1.01
Cannot
duplicate
to same track.
Press [EXIT/NO]
Cannot erase.
This is a
blank CD.
Press [ENT/YES]
Cannot export.
It's too big.
Please change a
export file.
Press [ENT/YES]
Cannot finalize
This is a
blank CD.
Press [ENT/YES]
Cannot import.
It's too big.
Please change a
import file.
Press [ENT/YES]
Cannot insert
this position.
Please change a
insert point.
Press [ENT/YES]
CD has track.
You can select
one song.
Press [ENT/YES]
Digital input
is selected.
Cannot continue
this function.
Press [ENT/YES]
3
6
9
7
8
4
34
5
Can’t duplicate
to the same
track as the
source.
Press [EXIT].
Disc is already
blank. Can’t
erase it.
Press [EXIT].
File too big to
export. Choose
another file
for export.
Press [EXIT].
Disc is blank.
Can’t finalize
this disc.
Press [EXIT].
File too big to
import. Choose
another file
for import.
Press [EXIT].
Can’t insert at
this position.
Choose another
insert point.
Press [EXIT].
Track already
written to disc
so only 1 song
can be written.
Press [EXIT].
Digital input
is selected.
Cannot do this
operation now.
Press [EXIT].
v1.00 No. v1.01
Illegal Fs rate
is detected.
Please check
your system.
Press [ENT/YES]
Invalid CD.
Please check
this media.
Press [ENT/YES]
LAST REC point
is not exist.
Please select
IN - OUT.
Press [EXIT/NO]
Locate marks
are empty.
Please try
[INSERT MARK]
Press [EXIT/NO]
Locate marks
are full.
Please try
[DELETE MARK]
Press [EXIT/NO]
MTC slave mode
is selected.
Cannot continue
this function.
Press [ENT/YES]
MTR is moving.
Please stop MTR
before doing
this function.
Press [EXIT/NO]
No armed track.
Please select
record tracks.
Press [EXIT/NO]
No DISK space.
Please try
[DELETE UNUSED]
function.
Press [EXIT/NO]
No file for import.
Are you sure ?
[YES] / [NO]
11
36
16
17
30
13
1
20
15
14
Invalid Fs rate
detected.
Check your
system set-up.
Press [EXIT].
Wrong type of
CD. Check the
disc.
Press [EXIT].
No LAST REC
point. Use
IN-OUT instead.
Press [EXIT].
No locate
markers have
been set. Use
INSERT MARK.
Press [EXIT].
Too many locate
markers. Use
DELETE MARK to
delete some
markers.
Press [EXIT].
MTC slave mode
selected.
Cannot do this
operation now.
Press [EXIT].
Cannot do this
when not
stopped. Stop
the transport.
Press [EXIT].
No tracks have
been armed. Arm
at least one
track.
Press [EXIT].
No free hard
disk space. Use
DELETE UNUSED
to make space.
Press [EXIT].
No file for import
has been found.
Change CD [YES],
else press [NO].
TASCAM 2488 – v1.00 Error and status messages 1
2488 v1.00 error and status messages
v1.00 No. v1.01
No select any
MIDI player.
Please try
[MENU-MIDI]
function.
Press [ENT/YES]
Non liner audio
is detected.
Please check
your system.
Press [ENT/YES]
Not detect
Digital input.
Please check
your system.
Press [ENT/YES]
Not enough
disk space.
Please try
[DELETE UNUSED]
function.
Press [ENT/YES]
Not enough room
on CD for burn.
Please replace CD.
[YES] / [NO]
Not enough work
space on disk.
Escape function.
Press [EXIT/NO]
Not found
master track.
Please try
[PRE-MASTERING]
Press [EXIT/NO]
Not found a
import file.
Please try
[USB OPEN]
function.
Press [ENT/YES]
Poor Memory.
Please try
[DELETE UNUSED]
function.
Press [EXIT/NO]
19
21
2
22
24
25
18
10
23
No MIDI player
selected. Use
MIDI PLAYER
to select.
Press [EXIT].
Non-linear
audio detected.
Check your
system set-up.
Press [EXIT].
Cannot find
digital input.
Check your
system set-up.
Press [EXIT].
Not enough free
disk space. Use
DELETE UNUSED
to make space.
Press [EXIT].
Not enough room on
CD for burn. Use
another CD [YES],
or cancel [NO].
Not enough room
on hard disk for
this operation.
Press [EXIT].
No master track
found. Use
PRE-MASTERING
to create one.
Press [EXIT].
Import file not
found. Use
USB OPEN to
import file.
Press [EXIT].
Not enough free
memory. Use
DELETE UNUSED
to free memory.
Press [EXIT].
v1.00 No. v1.01
Song is
protected.
Please try SONG
menu.
Press [EXIT/NO]
SSA mode
is selected.
Cannot continue
this function.
Press [ENT/YES]
Too many songs.
Cannot continue
this function.
Press [ENTER/YES]
Too many songs.
Please try
[SONG ERASE]
function.
Press [EXIT/NO]
Too many takes.
Cannot continue
to record.
Press [EXIT/NO]
Too short
master track.
Please try
[PRE-MASTERING]
Press [EXIT/NO]
Too short
IN-OUT marker.
Please try
[SET IN/OUT].
Press [EXIT/NO]
Too short
track length.
Please try
[SET OUT].
Press [EXIT/NO]
26
28
31
32
33
12
29
35
Protected song.
Unprotect with
SONG PROTECT
Press [EXIT].
SSA mode is
selected.
Cannot do this
operation now.
Press [EXIT].
Too many songs to
continue with this
operation.
Press [ENTER].
Too many songs.
Use SONG ERASE
to delete songs
you don’t need.
Press [EXIT].
Too many takes.
Can’t continue
recording.
Press [EXIT].
Master track is
too short. Use
PRE-MASTERING
to correct it.
Press [EXIT].
Time between IN
and OUT is too
short. Re-set
the points.
Press [EXIT].
Track is too
short. Choose
and set another
OUT point.
Press [EXIT].
Repeat mode
is selected.
Cannot continue
this function.
Press [ENT/YES]
27
Repeat mode is
selected.
Cannot do this
operation now.
Press [EXIT].
2 TASCAM 2488 – v1.00 Error and status messages
Loading...