TaoTronics TT-BS007
Wireless Laser Barcode Scanner
User’s Manual
2
Instructions
Fully integrated advantages of high-performance laser scanning, wireless
transmission and ergonomic, FG 2100 Wireless Laser Barcode Scanner is a product
with fashionable design and excellent performance. It has various advantages such as
stable and reliable long distance speedy transmission, data-storable, independent
network and so on. Its superior decoding ability enables it to read incomplete code and
fuzzy code effectively, to ensure more quickly reading of all one-dimensional bar codes.
It can be used in supermarkets, warehouse logistics, books, banking, transportation,
postal and industrial, manufacturing, factory production process management and other
fields.Its main features are:
Ø Excellent scanning performance;
Ø Fashionable design, lightweight and flexible, convenient and quick;
Ø Completely independent intellectual property rights;
Ø Unique communication technology makes “one-to-many networking” and
“many-to-one networking” possible;
Ø Caching mechanism, communication reliability, wide range of work;
Ø USB interface output, supporting serial / keyboard mode.
1. Product diagram
Scan Key
Luminotron
Scan Window
Buzzer
Scanner Outline drawing
3
Connect external antenna base
Receiver Indicator
Connect USB Interface
Charge bottom
Circular charger
Bottom view of the scanner
Front view of Receiver Bottom view of Receiver
Top view of Receiver
4
2. Features
（1）
Simple installation
Through the USB docking cable, the receiver plugs in the computer and play.
（2）
Long distance and strong wall-penetrating ability
The wireless transmission distance is up to 200M in open environment, with the
diffraction ability, it can penetrate walls.
（3）
Storage
Storable, scanned bar codes can be stored when wireless transmission fails out of
the wireless range; if the bar codes are less than or equal to 15 characters, the storage
can be more than 500 for a variety of environments.
If stored bar code number exceeds the maximum range of storage, the system will
automatically turn off scanning gun. Then, when the network conditions improve, the
stored bar code can be issued or use "close storage" or "restore factory settings" in
common functions of bar code setting to clear stored bar codes, that is, scanning
resumed only when the storage space is non-full.
（4）
Low power consumption
If the scanning system doesn’t scan bar codes within the set time,scanning guns
will automatically enter the shutdown state. Users can set off time according to their
own needs;the scanner won’t shut down when there are bar codes not sent out from the
storage. If the system is turned off, it can be waken up quickly and work normally by
pressing the scan button directly.
（5）
Anti-interference capability
When several wireless scanning guns used in the same area at the same time, the
wireless scanning guns will dynamicly hoppe frequency to unoccupied radio channels
to avoid conflict and interference; the same environment can accommodate up to 32
groups of wireless scanning guns and their receivers to work simultaneously.
（6）
Reliable transmission
5
Wireless scanning gun and its receiver have loop cutting inspection for each packet
to ensure the accuracy of data transmission so that data error and loss does not occur.
3. Accessory Details
Parts Name Specifications Quantity
Wireless laser scanner
1
Receiver
1
Charger
5V/500mA
1set
USB Cable
A-A 80cm 1
External Antenna of Receiver
433MHz 1
Instruction
1
Warranty Card
1
4. Installation Steps
When leaving factory, scanner and receiver have been paired, unless the user for
advanced network settings, under normal circumstances, users no longer need to match.
Initial installation, follow these steps:
(1) Connect the receiver to an external antenna, tighten the screws;
(2) Connect one end of the USB cable to the receiver's USB port, and then the other
end connected to the computer ’s USB cable port, the indicator light at the
receiving end is blinking after the success of connection;
(3) Create a new text input box on the computer, the cursor at the open text entry
box;
(4) Press the Scan button, buzzer "Di-di-di " three times prompt, scanner into
working condition, this time working status indicator light;
(5) When the bar code scanning is successful, "tick" is heard, while blue light
flashing, indicating scan successful, the indicator light will flash if the receiver
receives data. Bar code displayed on the computer input box.
5. Scanning
6
12345678
错误
12345678
Wrong
Wrong
(1)
When wireless bar code scanner scans, please maintain a certain distance
between the scanner and bar code, the best distance is15-20cm.
(2)
Make sure all the scan lines swept strip symbols and spaces. As shown:
（3）
While scanning, make sure the wireless scanning gun and the receiver in the
effective transmission distance.
6. Storage
When the distance between the scan gun and the receiver is too far or environmental
interference, the transmission will fail, then, wireless scanner automatically stores
scanned bar codes. After communication restored, according to the FIFO principle, the
gun automatically send stored barcodes. When the bar code sending fails, for storage,
the buzzer sounded, "Didi" twice to prompt.
There are two reasons for the failure of bar code sending, one is that the distance
between the wireless scanning gun and the receiver is greater than the effective distance,
the other is subject to interference from other wireless device signals. Solutions:
12345678
7
(1) Reduced to the effective scanning distance.
(2) Scanning by interference, do not do other operations, the system will
automatically hopping, until you can properly send data.
7. Low battery alert
During the scan, the buzzer continuously issued "Didi tick" three times the voice
prompt, indicating low voltage wireless scanning gun needs to be charged.
8. Charge
Switch off scanner, insert the round charger port into the charging port at the
bottom of the scanner, connect the power charger to start charging. Start charging, the
power indicator lights long; charging when the scanner is off and with low power,
power light flashs. Batteries can be filled in about two and a half hours, the power
indicator light flashes; charging, power indicator lights long.
9. Matching (Network)
When leaving factory, scanner and receiver have been paired, under normal
circumstances, users no longer need to match. If users need to re-pair, follow these
steps:
(1) Switch on the scanner;
(2) Pull out the receiver's USB cable from the computer and make sure that USB
cable and the receiver is connected, and that the receiver’s antenna connected
properly;
(3) Use "1 on 1 match " bar (see common features for bar code setting) in the printed
scanner scan manual;
(4) After scanning, connect the receiver ’s USB cable to the computer within 5
seconds;
(5) If the scanner buzzer "Didi tick" three times, said the pairing is successful, if
given a "dee dee dee dee dee dee" , said pairing failed;
(6) If the pairing is successful, the scanning gun and the receiver starts to work in
8
pair;
(7) If the pairing fails, repeat steps 2,3,4.
Advanced applications: network
Currently supports a scanning gun on two receivers network mode (hereinafter
referred to as "1 to 2 mode") or less than or equal to 4 scanners on a receiver network
mode (hereinafter referred to as "4 to 1 mode"). "1 to 2 mode", that is, data scanned by
a scanner can be sent to 2 computers; "4 to 1 mode", that is, up to four scanners’
scanning data can be sent to a computer. If users have several scan guns and
receivers,network combination can be based on their own needs.
If the user has five scan guns and three receivers, a "4 to 1 mode" and a "1 to 2
model" can be configured, Configuration of "4 to 1 mode" follows these steps:
(1) Switch on the first scanner;
(2) implementation of the above "1 on 1 match" process;
(3) pairing is successful, said the first scanner is in network,called as "1 on 1 mode";
(4) Switch on the second scanner, the same execution of "1 to 1 match" process,
successful matching shows that the second scanner has access to network,called
as "2 to 1 mode";
(5) Switch on the third scanner, the same execution of "1 to 1 match" process,
successful matching shows that the third one has access to network,called as "3
to 1 mode";
(6) Switch on the forth scanner, the same execution of "1 to 1 match" process,
successful matching shows that the forth one has access to network,called as "4
to 1 mode";
Note:
If you only need "2 to 1 mode", then step 4 can be executed. If you need "3 to
1 mode", then perform step 5.
Configuration of "1 to 2 mode" follows these steps:
(1) Switch on the wireless scanning gun;
9
(2) Implementation of the above "1 on 1 match" process;
(3) Successful pairing shows that the first receiver has access to the network, called as
"1 to 1 model";
(4) Match the second receiver:
(a) Pull out the second receiver's USB cable from the computer and make sure that
USB cable and the receiver is connected, and that the receiver ’s antenna connected
properly;
(b)Use "1 on 2 match " bar (see common features for bar code setting) in the printed
scanner scan manual;
(c)After scanning, connect the receiver’s USB cable to the computer within 5
seconds;
(d)If the scanner buzzer "Didi tick" three times, said the pairing is successful, if
given a "dee dee dee dee dee dee" , said pairing failed;
(e)If the pairing fails, repeat steps (a),(b),(c).
(5) If the pairing is successful, it shows that the matching of 1 on 2 network is
successful and can be used.
10. Common features of bar code setting.
1 on 1 match: Scanned this
order and if the original match
failed then execute new match.
H Y COCMD- MG
1 on 2 match ： In 1 to 2
mode,scan this order when
configure the second receiver.
HYCOCMD-MGA
20 seconds automatically shut
down if no action: Set the
scanner shut down
HYCOCMD-S20
10
automatically if the user doesn’t
have any operation in
20seconds.
1minute automatically shut
down if no action:Set the
scanner shut down
automatically if the user doesn’t
have any operation in 1minute.
HYCOCMD-S60
Forbid automatic shutdown:Set
that the scanner won’t shut
down automatically when no
operation is done.
H Y COCMD- SD
Keyboard mode output of the
receiver: Finished this scanning
command, the receiver will
switch to keyboard mode
output.
H Y COCMD- KB
Restore factory setting ：
Scanned this bar code the
wireless scaner will”restore
factory setting”.
HYCOCMD-DEFAULT
Open the storage function:Set
that when scan normally,the
data will be stored in the
scanner if the transmission
fails.
HYCOCMD-STORE
11
Close storage function:Set that
when scan normally,the
transmitted barcodes will lost
and the stored barcodes will be
cleared if the transmission fails.
Warn：When there is
data stored in the scanner, be
cautious to use this function.
HYCOCMD-DISST
Open wireless transmission:
Scanned this barcode,if the
wireless transmission works
normally,the system will
acquiescently switch on.
H Y C O C MD- T X
Close wireless transmission:
Scanned this barcode,close
wireless transmitted barcodes
whatever the internet condition
is.
HYCOCMD-DISTX
Factory setting: 20 seconds sleep time, open storage, clear the pairing
information. After scanning the bar code to restore factory settings above, the
type and parameters of open the bar code identifying remain unchanged. In
addition, if there are bar codes stored in the wireless scanning gun, the bar
code stored will be cleared.
11. The default parameters of bar code type
EAN Decode On
Output of EAN13 check code On
12
Output of EAN8 check code On
Output of leadcode On
Complement decoding Automatic(output when there
is complement)
UPC Decode On
Output of UPCA check code
On
Output of UPCE check code
On
Output of leadcode
On
CODE128 Decode On
Identify mini length
4
Identify max length
50
CODE39 Decode On
Identify mini length
5
Identify max length
50
Error check Off
Output of check code
On
FULLASCII On
CODE93 Decode Off
Identify mini length
8
Identify max length
50
CODE11 Decode Off
Identify mini length
8
Identify max length
50
Error check Off
Output of check code
On
GS1 Decode Off
Loading...