TaoTronics TT-AH038 User Manual

Download

Page 1

尺寸：150*200mm 装订成册材质：封面128克铜版纸内页80克书纸

Model:

TT-AH038

Page 2

www.taotronics.com

ASIA PACIFIC

E-mail: support.jp@taotronics.com(JP)

JP Importer: 株式会社SUNVALLEY JAPAN

Address: 〒104-0032 東京都中央区八丁堀3丁目18-6 PMO京橋東9F

EUROPE

E-mail:

support.uk@taotronics.com(UK)

support.de@taotronics.com(DE)

support.fr@taotronics.com(FR)

support.es@taotronics.com(ES)

support.it@taotronics.com(IT)

EU Importer: ZBT International Trading GmbH

Address: Halstenbeker Weg 98C, 25462 Rellingen, Deutschland

NORTH AMERICA

E-mail: support@taotronics.com(US)

support.ca@taotronics.com(CA)

taotronics.com/warranty:

support@taotronics.com(US)

support.ca@taotronics.com(CA)

support.uk@taotronics.com(UK)

Tel: 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)

US Distributor: SUNVALLEYTEK INTERNATIONAL INC.

Address: 46724 Lakeview Blvd, Fremont, CA 94538

MANUFACTURER

Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.

Address: 333 Bulong Road, Shenzhen, China, 518129

Learn more about the EU Declaration of Conformity: https://www.taotronics.com/downloads-TT-AH038-CE-Cert.html

10-29-2019

TT-AH038_V1.1 EN

MODEL: TT-AH038

3 IN 1 HUMIDIFIER

User Manual

Page 3

CONTENTS

STATEMENT

SAFETY INSTRUCTIONS

BEFORE USING THE HUMIDIFIER

WHEN USING THE HUMIDIFIER

AFTER USING THE HUMIDIFIER

PACKAGE CONTENTS

SPECIFICATIONS

PRODUCT DIAGRAM

INFORMATION ON USE OF ESSENTIAL OILS FOR BABY ROOM NURSERY

Patch Test

Dilution Recommendations for Babies/Children

Safety Tips for Babies /Children

OPERATIONS AND FUNCTIONS

Add water

Power On / Off and Mist Adjustment

Nightlight Control

Low Water Protection: Auto Shut-off the Humidier

CLEANING AND MAINTENANCE

Caution

Daily Maintenance

Weekly Maintenance

Scale Removal Instructions

Disinfecting Instructions

End-Of-Season Care and Storage

TROUBLESHOOTING GUIDE

WARRANTY

TAOTRONICS CUSTOMER CARE

02/03

12/13

Page 4

STATEMENT

TaoTronics Warranty

Thank you for purchasing a TaoTronics product that has been tested to meet our stringent

quality standards. This product is covered with TaoTronics product and labor warranty for 18

months from the date of its original purchase.

BEFORE USING THE HUMIDIFIER

Please email us with your order ID and problem or issue via support@taotronics.com or

Distributor Support, we will respond within 24 hours.

Please read the User Manual thoroughly. Clean and maintain the product as instructed. If any

abnormalities occur, please refer to the Troubleshooting Guide rst.

This warranty is void if the defect is caused by accidental damage, misuse, abuse, neglect,

improper repair or alteration by unauthorized persons, or a failure to follow operating instruc-

tions provided with the product including adding essential oils directly into the tank and base.

This warranty does not apply to normal wear and tear or commercial use.

In no event shall liability exceed the purchase price paid by the purchaser of the product.

Under no circumstances shall there be liability for any loss – direct, indirect or incidental – or

consequential damage arising out of, or in connection with the use of the product.

SAFETY INSTRUCTIONS

The humidier was made with safe and environmental protection materials, it has been

certied and complied with the requirement of sale regions’ related regulations or laws.

IMPORTANT: Please read and save this SAFETY INSTRUCTIONS before using the device.

Basic precautions should always be followed to reduce the risk of re, electrical shock, and

injury to persons or damage to the product.

1. Please extend the cord and check any signs of damage. Do not use the humidier if the cord

has been damaged.

2. DO NOT place this humidier in wet environments.

Please always keep the humidier out of reach of patients & children & pet. The humidier is

not a toy, do not allow children to play with it.

30 CM

1. Please always place the unit on a smooth, at, lint-free, non-metallic, waterproof and level

surface and keep it away from direct sunlight.

2. Always place the unit at least two feet above the oor, 12 inches (30 cm) away from the wall,

other appliances or wooden furniture.

30 CM

60 CM

Page 5

WHEN USING THE HUMIDIFIER

1. DO NOT place the unit on carpet, towel or wood surface, which will block the vent and may

damage the unit.

2. DO NOT place the humidier near naked ames and heat sources, such as stove tops,

ovens, radiators or computers.

3. DO NOT use if the water tank becomes damaged or cracked.

1. DO NOT plug the unit with wet hands.

2. DO NOT direct the mist nozzle against the wall.

1. DO NOT use your hand or any other object to cover the nozzle while the unit is on to avoid

damaging the product or causing injury.

2. DO NOT clean the unit while it is connected to a power source or while it is on.

Humidity

40% 60%

1. DO NOT move or tilt the humidier while it is in operation.

2. The most comfortable environmental humidity is between 40%-60%. Please adjust the mist as

needed.

Page 6

1. DO NOT block air inlet or air outlet.

2. The humidier should always be shut off and unplugged with dry hands before moving or

while being cleaned. Never pull by cord.

PACKAGE CONTENTS

· 1 x TaoTronics Humidier (Model: TT-AH038)

· 1 x Cleaning Brush

· 1 x Thank You Card

· 1 x User Manual

SPECIFICATIONS

AFTER USING THE HUMIDIFIER

1. Always disconnect from a power source by pulling the plug when not in use.

2. Humidier requires regular cleaning. Please refer to, and follow the Cleaning and

Maintenance instructions.

Model

Input

Power

Water Tank Capacity

Mist Output

Working Time on a Full Tank

Recommended Room Size

Noise

Dimensions

Net Weight

TT-AH038

AC 100-120V 50/60Hz

DC 24V

18W

2.5L / 0.67Gal

Min: 60ml/h

Max: 160ml/h

12-30h

10-25m²/107-270ft²

≤28dB

287 x 215 x 153mm / 11.3 x 8.5 x 6.0in

720g/25.4oz

1. DO NOT keep water in the tank when not in use for an extended period of time and/or when

no one is home.

2. DO NOT attempt to repair or adjust any electrical or mechanical functions on this humidier.

Doing so will void your warranty.

Page 7

Please be sure to follow our recommendations on how to use essential oils for baby room

nursery with your humidier. Failure to do so may result in malfunction or damage to the

humidier or even harm to the babies.

Younger children or babies have super sensitive skin. The thin, sensitive skin is much more

permeable to essential oils than the skin of an older child or adult. Too high a dilution could

cause skin irritation and other problems later down the road.

Therefore, before applying essential oils to babies, it’s important to understand proper dilution

ratios and application methods.

INFORMATION ON USE OF ESSENTIAL

OILS FOR Baby ROOM NURSERY

1. Nozzle

2. Water Tank

3. Base

4. DC 24V Input Port

5. Power Adapter

6. Control Knob

7. Night Light Button

8. LED Indicator

9. Tail/Tap

PRODUCT DIAGRAM

10. Mufer

11. Tank Cap

12. Water Inlet

13. Air Inlet

14. Atomizer

15. Air Outlet

16. Water Reservoir

17. Water Floater

Even when essential oils are diluted with a carrier oil, they may cause skin irritation and sun

sensitivity, especially in children. It’s recommended that a patch test (also sometimes called a

“spot test”) be performed on the skin, with each new oil introduced.

Patch Test

A simple patch test can give you an understanding of how your baby will react to the oil.

1. Apply a very small amount of diluted essential oil on your baby’s skin on the leg or on the

arm.

2. Wait for about 24 hours and check for any signs of irritation, redness or inammation of the

skin.

3. If you notice a reaction, stop using that particular oil. If your baby has no reactions, then

you can proceed using that oil.

Page 8

Dilution Recommendations for Babies/Children

It is not recommended to use any essential oils on babies under 3 months.

OPERATIONS AND FUNCTIONS

Ages

0-1(≥3months)

1-2 2 drops 10 drops

2-6 4 drops 10 drops

7-11 6 drops 10 drops

12+ 10 drops 10 drops

Essential Oil

1 drop

Carries Oil

10 drops

Safety Tips for Babies /Children

Essential oils need to be used with proper care and precautions to avoid any risks. We

recommend to limit diffusion to 30-60 minutes, a few times a day as needed.

• Due to the strong concentration, there are many essential oils that may not be best for your

child at a specic age. It is best to ensure that you have a discussion with your baby’s

doctor about which are the best kid-friendly essential oils that are ideal for your little one.

Also get the directions of usage as not all oils can be used on all routes.

• Must keep essential oils out of the reach of your child to prevent accidental ingestion.

• Ensure that you buy essential oils of good quality from a trusted brand.

• Do not expose children to direct sunlight after using essential oils like citrus oils, as it can

cause severe irritation, rash or pigmentation on the skin.

• Make sure the room is well-ventilated so the oils are not too potent in the room. If you nd

that oil is potent, then you will need to lower the quantity being used.

1 2

3 4

Add water

1. Turn the water tank upside down. Remove the tank cap and ll the tank with clean and

cool water only.

[Optional] Add diluted aromatherapy-grade essential oils into the tank, if you use the

humidier for baby room nursery, please read the 【INFORMATION ON USE OF ESSENTIAL

OILS FOR BABY ROOM NURSERY】 rst.

2. Attach the tank cap and place the tank back onto the base. Please make sure it ts

together securely so that water can go from the tank to the reservoir.

1 2 3 4

1. If tap water is too hard, it is recommended to use ltered or distilled water to avoid white

dust. DO NOT use hot water.

2. DO NOT put anything other than water or diluted essential oil into the water tank.

3. DO NOT add water into the base or through nozzle.

4. DO NOT move the humidier while the water tank is full of water to avoid leakage or base

overlling.

Page 9

1 2 3

Power On / Off and Mist Adjustment

Connect the power adapter to humidier input port and plug the adapter into a wall

socket. Now the humidier is ready for use.

1. Rotate the control knob clockwise to the ON position. The LED indicator will light up,

indicating the humidier has been turned on to a minimum mist level.

2. Keep rotating the control knob clockwise to increase the mist level.

3. Rotate the control knob counterclockwise to the OFF position to turn off the humidier. The

LED indicator will turn off. The fan will work for another 2 minutes to dry the mist tube.

CLEANING AND MAINTENANCE

Caution

1. DO NOT submerge the base in water.

2. Make sure water does not enter the base through the air outlet, air inlet,

or the control knob.

3. DO NOT wash any part of this humidier in dish washer which will

damage the humidier and void the warranty.

Daily Maintenance

Turn off the humidier, unplug it from the power source. Drain water from the tank, reservoir

and base.

The most comfortable environmental humidity is between 40%-60%. Please adjust the mist

as needed.

1.5S

OFF ON

Nightlight Control

1. Press the button to turn on/off the nightlight, the brightness is at the default medium range.

2. Press and hold the button for 1.5 seconds to adjust the light brightness, release at the

desired level. Press and hold it again to adjust the brightness to the opposite direction.

3. The nightlight has memory function, If power is not disconnected, the unit will remember

the brightness setting of the last time when the nightlight or humidier was turned off.

Low Water Protection: Auto Shut-off the Humidier

When there is not enough water inside the water reservoir, the humidier will stop misting and

the LED indicator will become red. It is designed for safety to prevent the humidier from

possibly overheating and damaging the atomizer.

Weekly Maintenance

1. To properly clean your humidier, we recommend you to remove scale and disinfect the

humidier separately.

2. DO NOT mix vinegar and bleach solutions together. Do not use more than 1/2 tsp. of

bleach to avoid damaging your humidier.

3. Please make sure the sealing ring on the tank cap is installed properly after cleaning to

31 2

avoid water leakage. Please refer to the diagram on page 15.

4. DO NOT scrub or scrape the atomizer, please always wipe clean it with a soft cloth.

Scale Removal Instructions

1 2

Page 10

15-20

minutes

1. Turn off and unplug the humidier.

2. Drain water from the water tank and base.

3. Fill the water tank half full. Add in 1 teaspoon of undiluted distilled white vinegar. Wash the

water tank by your hands.

4. Place the tank onto the base. The vinegar solution will enter the water reservoir to loosen

mineral buildup (scale) on the atomizer, water oater and the bottom of the water tank. Set

still for 15-20 minutes.

5. Drain the solution. Wipe the atomizer and oater with a soft cloth to remove loosened

mineral deposits.

6. Rinse both the water reservoir and water tank until the smell of vinegar (for scale removal)

or bleach solution (for disinfecting, see below) is gone.

Disinfecting Instructions

1. Follow steps 1-2 of the previous section on scale removal.

2. Fill the water tank half full. Add in ½ tsp of bleach. Place the tank cap back on. Swish the

solution around in tank. Place the tank on the base. The bleach solution will enter and

disinfect the water reservoir as well as the other components. Set still for 15-20 minutes.

3. Follow steps 4-6 of the previous section on scale removal to complete disinfecting the

humidier.

End-Of-Season Care and Storage

1. Follow the cleaning instructions when the humidier will not be used for at least one week,

or at the end of the season. Remove any accessories used with the humidier and allow the

humidier and accessories to dry completely before storing.

2. DO NOT store with water inside the base, water reservoir, or tank.

3. Pack the unit safely and store in a cool, dry location.

Page 11

TROUBLESHOOTING GUIDE

1. If the information listed in the troubleshooting guide can’t solve your problem, please

email us for help.

2. Failure to keep this unit clean from mineral deposits may affect operation of this unit.

3. Customer failure to follow these instructions may void the warranty.

The LED Indicator will light up,

but no mist or little mist is

produced

Tank leakage

Not enough water inside the tank

Mist level is set too low Adjust to maximum mist

Mineral buildup on the atomize

The base might be overlled

Tank may be damaged

Tank cap is not tightened securely

Spring stuck

Rell and reinstall the water tank

Feel if any air comes out from the nozzle. If yes, then clean water scale on the atomizer with s soft cloth as instructed

Remove the tank, empty the base and place the lled tank on the empty base

Check for possible cracks in the tank, replace if necessary

Tighten the tank cap

Ensure the spring is properly secured to the tank bottom allowing water to pass through to the base.

Problem Possible Cause Solution

LED indicator is off

LED indicator stays red

Power adapter not plugged in

No power from power outlet

Power adapter not connect to the input port

No water in the water reservoir

Water oater stuck

1. Spring

2. Water Floater

3. Sealing Ring

Ensure the power adapter is properly plugged in

Try another power outlet

Connect power adapter to the input port.

Ensure the oater is secured properly to the tank bottom allowing water to pass through to the base

Adjust the water oater to a horizontal position and make sure it can rise up with water

Mist height is low, damping

surrounding desk or oor.

Condensation forms around

humidier or on windows

and walls

Sealing ring was not installed on tank cap

Mist level is set too high for the room size

Air inlet is blocked

Low indoor temperature leads to liquefaction

Install the sealing ring on the tank cap, please contact us if it is missing

1. Check if the room is too humid and adjust to lower mist. 40%-60% works best

2. Open door and windows, or change to a larger room

Humidier should be placed on a hard at surface, 2 feet above the oor, 12 inches away from the wall. Point nozzle away from wall or window

Raise the room temperature to 25°C / 77°F

Page 12

Poor humidication

White dust appears or the black coating on the base akes off

Strange Odor

Strange water noise

Humidier is getting too hot

Mist level is set too low for the room size

Air inlet is blocked

Low indoor temperature leads to liquefaction

Tap water may contain too much minerals

Clean the unit

Water is going down to the water reservoir

Unit works for too long

1. Adjust to maximum mist

2. Close door or windows to reduce air ventilation, or change to a smaller room

Humidier should be placed on a hard at surface, 2 feet above the oor, 12 inches away from the wall

Raise the room temperature to 25°C / 77°F

Replace with ltered or distilled water or use a TaoTronics Demineralization Cartridge

1. Clean the humidier as instructed

2. Leave the empty and opened water tank in a cool place for 12 hours without the tank cap attached

This is normal while it is working

Power off and place in a well-ventilated place for 10 minutes

WARRANTY

This product is covered with TaoTronics product and labor warranty for 12 months from the

date of its original purchase. You will be given a warranty extension of 18 months if the

product is registered on our website (www.taotronics.com).

Any defective part will be, at the discretion of SUNVALLEYTEK INTERNATIONAL INC. , repaired

or replaced at no charge if the appliance has not been tampered with and has been used

according to these printed directions.

If any problems occur, please contact TaoTronics support (support@taotronics.com) immedi-

ately to launch a warranty claim. Specify model number and your Amazon order number. Our

Consumer Service Representative will respond within 1 business day, advise you how to

correct the problem yourself, or instruct you on how to return the defective unit back to us for

repair or replacement.

We can only provide after sales service for products that are sold by TaoTronics or TaoTronics

authorized retailers and distributors. If you have purchased your unit from a different place,

please contact your seller for return and warranty issues.

CONTACT / TAOTRONICS CUSTOMER CARE

PLEASE CONTACT US BEFORE RETURNING THIS PRODUCT TO THE STORE.

EMAIL TAOTRONICS CUSTOMER CARE FOR PROBLEMS AND QUESTIONS.

WE WILL RESPOND WITHIN 1 BUSINESS DAY.

Sunvalleytek USA, Inc.

Address: 46724 Lakeview Blvd, Fremont, CA 94538

E-mail: support@taotronics.com(US)

support.ca@taotronics.com(CA)

support.uk@taotronics.com(UK)

Tel: 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)

Website: www.taotronics.com