TaoTronics TT-AH006 User Manual

TAOTRONICS ULTRASONIC HUMIDIFIER

User Guide

Hello

TT-AH006

EUROPE

E-mail:
[e-mail](UK)
[e-mail](DE)
[e-mail](FR)
[e-mail](ES)
[e-mail](IT)
EU Importer: ZBT International Trading GmbH,Halstenbeker
Weg 98C, 25462 Rellingen, Deutschland

NORTH AMERICA

E-mail:
[e-mail](US)
[e-mail](CA)
Tel: [phone] (Monday-Friday: 9:00 – 17:00 PST)
Address: 46724 Lakeview Blvd, Fremont, CA 94538

ASIA PACIFIC

E-mail: [e-mail](JP)
JP Importer: 株式会社ニアバイダイレクトジャパン

www.taotronics.com

CONTENTS

01/10

11/20

21/30

31/40

41/50

English
Deutsch
Francais
Espanol
Italiano

TAOTRONICS ULTRASONIC HUMIDIFIER

Quick Guide

Hello

Thank you for choosing the TaoTronics TT-AH006
Ultrasonic Humidier. Please read this manual before

using and keep it for future reference.

US UK CA

01/02

Features

• Unique contemporary design for modern home and ofce use

• Large 6L water capacity with 3-level mist output

• Touch control with full LED status display

• Preset humidity level

• Sleep mode

• Warm and cool mist output

• Automatic protection when water tank is lifted

• Low water-level protection

• Built-in lter removes bacteria and bad odor

Package Contents

1x TaoTronics

TT-AH006 Ultrasonic

Humidier

1x User Guide

03/04

How to Use

• Place the humidier on a at surface

• Lift the water tank and unscrew the water tank cap located at the
bottom of the tank

• Fill the water tank with clean water. Close the water tank cap and
place the water tank back onto the main body

• When the power plug is connected, the humidier will make a
beeping sound. The low water-level indicator may ash due to the
time needed for the water to ll the water chamber inside the main
body. Just wait until it stops ashing

• When the water runs out, low water-level protection will automatically
cut power to the main circuit and venting fan. Mist output will stop
and the low water-level indicator will start ashing

Model

Working Voltage

Power Consumption

Water Tank Volume

Output Level

Working Time

Noise Level

TT-AH006
AC 120V/60Hz (US/CA)

AC 230V/50Hz (UK)
Cool Mist：35W Max.

Warm Mist: 130W Max.

6L / 1.59 Gal

Level 1: 150±30mL/h
Level 2: 250±30mL/h
Level 3: 350±30mL/h

Level 1: 40 hours
Level 2: 20 hours
Level 3: 15 hours

≤38dB(A)

Specications Product Diagram

①
②

③

④
⑤

⑥

⑦

Nozzle
Water Tank
Water Filter
Water Tank Cap
Control Panel
Main Body
Air Filter

⑦

05/06

Power

Touch the power button to turn the unit on/off. When the device is in
standby mode tap on the Sleep Mode button to change the tempera­ture display. The ambient temperature will be shown in Fahrenheit by
default. Tap again to switch to Celsius.
Note: The temperature display can't be changed when the device is
working.

Mist Output
When the unit is powered on, touch the Mist Output button to cycle

through the 3 mist output levels.

Warm Mist

Touch the Warm Mist button and the humidier will heat the mist.
Note:

• It will take up to 30 minutes for the mist to warm up. Warm mist can
increase humidifying speed by 15- 20%, but it uses more power than
cool mist.

• When warm mist is on, do not hold your hand in the mist to avoid
burning. Keep an eye on children.

Timer

Touch the Timer button to set an automatic timer between 1 to 9 hours.
Select CH to disable the timer. Once selected, the timer icon will ash 4
times to conrm.

Control Panel

%

• To continue using the humidier, unplug the power plug and ll the
water tank with clean water. Drain out any residual water before lling
the water tank with clean water

Note: When moving the humidier, please unplug the power plug and
move the entire unit together. Do not move the unit when it is working.

07/08

• When the water tank is full, do not move it as the water might overow
or ow into the body and cause damage.

• Do not add water through the nozzle directly under the tap.

• After each use, turn off the unit and unplug the power outlet.

• Do not pour water into the water tank when the power is on or when
the power plug is plugged in.

Cleaning the Water Tank

Before cleaning, make sure the unit is turned off and the power plug is
unplugged.

• Cleaning the water tank regularly (recommended once every 2-3
weeks): Remove the water tank plug, wipe off any lime scale, and
rinse with clean water.

• Cleaning the base (recommended once a week): Wipe the base with a
soft cloth dipped with a mild cleaning agent and rinse off with clean water.

• Cleaning the humidier: Rinse a soft cloth in warm water and wipe off
surface stains. You can rinse the nozzle under tap water directly.

• Storing the humidier: When the unit has not been used for a long time,
clean and dry the unit and store it in a dry place in the original package.

Troubleshooting Guide

Sleep Mode

Touch the Sleep Mode button to enter sleep mode. In sleep mode, the
beep sound is disabled. In sleep mode, all lights on the display will turn
off except the Sleep icon. Tap on any button to wake up the display. In
sleep mode, all buttons are functional except for the Warm Mist and
Control Lock Buttons. Press and hold the Sleep Mode Button for 1.5s to
exit sleep mode.

Control Lock

Touch the the Control Lock button for 1.5s to lock all other control
buttons. This will prevent any button from being pressed by accident. A
white LED on the display screen indicates the control is in lock mode.
Touch the Control Lock button for 1.5 seconds to turn off the lock mode.

Important

• Do not touch the water tank or any component while the unit is working.

• Do not exceed the max level when adding water.

• Stop using when the water level is low.

• Do not power on the humidier when the water tank is not in place.

• Never add water hotter than 40°C / 104°F to avoid any possible
damage or malfunction of the device.

• Do not pour water through the mist nozzle. Wipe off any water outside
the body with a dry cloth.

• When the room temperature is 0°C / 32°F or below, please empty
water from the unit, as ice will damage the components.

• Do not place metals, chemicals, or detergents into the water to avoid
any possible damage or malfunction of the device.

Humidity Level

Touch the Humidity Button to set the humidity value for the environment.
Once set, the humidity value icon will ash 4 times to conrm. The mist
output will continue until the preset humidity value is achieved. Select

--% to turn off this function.

%

Problem Causes Solutions

No power source

Power not turned on

Low water

The device is
getting too hot

Connect power plug

Tap the Power button to
turn on the humidier

Add water into the
water tank

Power off and place in
a well ventilated place
for 10 minutes

No mist
coming out

09/10

No mist
coming out

Warranty

TaoTronics humidiers are covered by TaoTronics 12 month limited
warranty from the date of its original purchase. If any problems occur,
please contact our support team.

We can only provide after sales service for products that are sold by
TaoTronics or TaoTronics authorized retailers and distributors. If you have
purchased your unit from a different place, please contact your seller
for return and warranty issues.

Irregular water pressure

The preset humidity level
is smaller than current
room humidity level

Drain out all the remaining
water inside the base unit
after each use

Set preset humidity level
above current room
humidity level or turn off
this function

Water exceeds max level

Stain built up inside
water tank

Air lter blocked by dust

Get rid of some water
Clean the water tank

as instructed
Clean air lter

Abnormal mist

Cover not properly covered

Temperature and humidity
of environment is too high

Unit is new

Dirty water

High mist output

Contaminated water

Room size is too big
or air ows too fast

Cap on the cover properly

Move the unit to a well
ventilated area

Clean water tank as
instructed, use after
air drying

Clean water tank
as instructed, use
clean water

Adjust the mist
output to low

Use clean water

Limit to 50 square meters
or smaller rooms, close
windows and doors to
reduce air ventilation

Water leakage

Bad/strange
smell

Mist or drops of
water form around
the device

Preset humidity
level cannot be
reached due
to external
environment

Vielen Dank, dass Sie sich für den TaoTronics TT-AH006
Ultraschall Luftbefeuchter entschieden haben. Bitte lesen Sie die

Bedienungsanleitung aufmerksam und bewahren Sie sie gut auf.

DE

11/12

Eigenschaften

• Einzigartiges, stilvolles Design für das moderne Heim und Büro

• Großer 6L Wassertank mit 3 Stufen Nebelausstoß

• Berührungsempndliches Bedienfeld mit LED-Statusanzeige

• Voreingestellte Luftfeuchtigkeitsstufen

• Schlafmodus

• Warmer und kalter Nebelausstoß

• Automatischer Schutz, wenn Wassertank angehoben wird

• Schutzfunktion bei zu niedrigem Wasserstand

• Eingebauter Filter entfernt Bakterien und schlechten Geruch

Lieferumfang

TAOTRONICS ULTRASONIC HUMIDIFIER

Quick Guide

Hello

1x Bedienungsanleitung1x TaoTronics TT-AH006

Ultraschall

Luftbefeuchter

13/14

Verwendung

• Stellen Sie den Luftbefeuchter auf einer achen Oberäche.

• Heben Sie den Wassertank an und schrauben Sie den
Wassertankdeckel von der Unterseite des Wassertanks ab.

• Befüllen Sie den Wassertank mit reinem Wasser. Schrauben Sie den
Wassertankdeckel wieder auf und setzen Sie den Wassertank wieder
auf die Basis.

• Wenn das Netzteil angeschlossen ist, signalisiert der Luftbefeuchter
dies durch einen Piepton. Die Anzeige für einen niedrigen
Wasserstand blinkt solange auf, bis Wasser eingefüllt wurde. Danach
sollte das Blinken aufhören.

• Wenn Wasser ausläuft, unterbricht der Schutz für niedrigen
Wasserstand die Stromversorgung zu den Hauptschaltkreisen und
den Ventilatoren. Der Nebelausstoß wird gestoppt und die Anzeige
für niedrigen Wasserstand blinkt.

Modell

Betriebsspannung

Stromverbrauch

Wassertankkapazität

Nebelausstoß

Betriebszeit

Lärmpegel

TT-AH006

AC 230 V/50 Hz

kalter Nebel: 35 W max.
warmer Nebel: 130W max.

6L

Stufe 1: 150 ml/h (±30ml)
Stufe 2: 250 ml/h (±30ml)
Stufe 3: 350 ml/h (±30ml)

Stufe 1: 40 Stunden
Stufe 2: 20 Stunden
Stufe 3: 15 Stunden

≤38dB(A)

Spezikationen Produktdiagramm

①
②

③

④
⑤

⑥

⑦

Sprühdüse
Wassertank
Wasserlter
Wassertankdeckel
Bedienfeld
Basis
Luftlter

⑦