MX9200R
PLANETARY MIXMASTER
Ben ch Mixer
Instruction & Recipe Booklet
®
MX92 0 0
Heading
Sub Heading
Body copy with not indent applied.
• Bullet copy Bullet copy Bullet copy Bullet
copy Bullet copy Bullet copy Bullet copy
Bullet copy
1 scoop ice cream – any flavour
2 tablespoons topping
2
Contents
Sunbeam’s Safety Precautions 2
Congratulations 3
Features of your Café Series
Planetary Mixmaster® 4
Using your Café Series
Planetary Mixmaster
Safety Mechanisms 11
Mixing Guide 12
Oven Temperature Guide 13
Care and Cleaning 14
Troubleshooting Guide 15
Ingredients 16
Cookery Tips for Best Results 17
Making a Successful Dough 19
Recipes 21
®
®
®
6
Important instructions – retain for
future use.
1
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR SUNBEAM
CAFE SERIES
BENCH MIXER.
• Never remove beater, Scrapemaster
beater, whisk or dough hook when the appliance
is in operation.
• Ensure fingers are kept well away from moving
beater, Scrapemaster
dough hook.
• Ensure that the bowl is secured and locked onto
the base of the Planetary Mixmaster
Mixer before commencing mixing.
Sunbeam are very safety conscious when designing
and manufacturing consumer products, but it is
essential that the product user also exercise care
when using an electrical appliance. Listed below are
precautions which are essential for the safe use of
an electrical appliance:
• Read carefully and save all the instructions
provided with an appliance.
• Always turn the power off at the power outlet
before you insert or remove a plug. Remove by
grasping the plug - do not pull on the cord.
• Turn the power off and remove the plug when the
appliance is not in use and before cleaning.
• Do not use your appliance with an extension cord
unless this cord has been checked and tested by
a qualified technician or service person.
• Always use your appliance from a power outlet of
the voltage (A.C. only) marked on the appliance.
• This appliance is not intended for use by young
children or infirm persons unless they have been
adequately supervised by a responsible adult to
ensure that they can use the appliance safely.
• Young children should be supervised to ensure
that they do not play with the appliance.
• Never leave an appliance unattended while in
use.
®
PLANETARY MIXMASTER®
™
spatula
™
spatula beater, whisk or
®
Bench
• Do not unlock or remove the mixing bowl from the
base of the Planetary Mixmaster
whilst in use.
• Never tilt back the head of the Planetary
Mixmaster
in operation.
• When using extremely heavy loads the appliance
should not be operated for more than 3 minutes.
This does not apply to the recipes detailed in this
booklet.
• Ensure long hair is tied back and young children
are not near the bowl.
• Do not use an appliance for any purpose other
than its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch any
hot surface.
• Do not operate any electrical appliance with a
damaged cord or after the appliance has been
damaged in any manner. If damage is suspected,
return the appliance to the nearest Sunbeam
Appointed Service Centre for examination, repair
or adjustment.
• For additional protection, Sunbeam recommend
the use of a residual current device (RCD)
with a tripping current not exceeding 30mA in
the electrical circuit supplying power to your
appliances.
• Do not immerse the appliance in water or any
other liquid unless recommended.
• This appliance is intended to be used in
household and similar applications such as: staff
kitchen areas in shops, offices and other working
environments; farm houses; by clients in hotels,
motels and other residential type environments;
bed and breakfast type environments.
®
Bench Mixer whilst the appliance is
®
Bench Mixer
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
2
Congratulations
Congratulations on the purchase of your
Sunbeam Café Series
Bench Mixer.
The Sunbeam Café Series
style and superior performance capturing
the essence of the commercial kitchen.
Inspired by heavy-duty equipment found in
restaurants, cafes and bars, the Sunbeam
Café Series
together a range of appliances designed
to expertly create authentic café food and
beverages at home.
®
is built to last. It brings
®
Planetary Mixmaster®
®
delivers quality,
Uncompromising blends of stainless steel,
brass and die-cast alloy characterise the
range. This combined with advanced
technology and functional design, guarantee
the performance, that each product will
surpass expectations.
The Sunbeam Café Series
Mixmaster
quality die-cast metal components and
includes many features that make mixing at
home easy.
®
Bench Mixer is designed with
®
Planetary
3
Features of your Café Series®
®
Planetary Mixmaster
Bench Mixer
1000W motor
Powerful motor achieves thorough mixing results.
Full die-cast metal body with sintered metal gears
The heavy duty die-cast metal body combined
with sintered metal gears deliver quality, style and
superior performance.
Planetary mixing action
Enables the mixing attachment (beater,
Scrapemaster
hook) to rotate whilst travelling around the inside of
the bowl, and reach all areas of the bowl ensuring
ingredients are completely mixed.
Slow start
The mixing speed is gradually increased to prevent
ingredients splashing out of the mixing bowl.
™
spatula beater, whisk or dough
Splashguard with pouring chute
Splashguard prevents ingredients from spilling out
of the mixing bowl. The pouring chute allows adding
ingredients directly into the mixing bowl without
having to stop the mixer and lifting the mixer head.
Stainless steel mixing bowl
The 4.5L litre mixing bowl is ideal for mixing large
or small quantities of ingredients.
It features a handle for ease of use.
Cord storage
For added convenience the unused cord length
can easily be pushed into the base of the mixer
for storage.
Pause / Start button
Allows you to instantly stop the mixer to assess the
mixing progress and/or add additional ingredients
without affecting the timer.
Carrying grips
Grips at both sides of the mixer base allow for easy
carrying.
4
4
Buttons
' ' and ' ' buttons can be used to choose
the desired mixing duration, or to set the
kitchen timer.
Die-cast alloy dough hook
Takes the hard work out of kneading dough and
other heavy mixtures.
Stainless steel whisk
Perfect for whisking cream, egg whites, light
batters and packet cake mixes.
Head release with in-built safety feature
The mixer head can be easily released and lifted
with one hand. It tilts upwards and locks securely
into position to allow easy insertion and removal
of the mixing bowl and attachments. The in-built
safety feature ensures that the mixer only starts
when the mixer head is tilted downwards and
securely locked in. Lifting the mixer head during
the mixing process will automatically cut power to
the motor.
Scrapemaster™ spatula beater
Excels at combining ingredients and
simultaneously scrapes the sides and the
bottom of the mixing bowl, virtually eliminating
hand-scraping and batter build-up on the
blade. Superior bowl clearance also makes this
attachment ideal for smaller mixing quantities.
Die-cast alloy beater
Provides maximum aeration for creaming butter
and sugar, and is also ideal for mixing heavy cake
mixes.
LCD screen with timer
LCD screen displays mixing time and speed
setting. Timer function can be set to count up or
down as required.
Speed control dial with 12 variable settings
The combination of 12 electronic speeds and a
powerful torque control motor ensures superior
mixing control and maintains speed, regardless of
the mixing load.
5
Using your Café Series® Planetary
®
Mixmaster
Bench Mixer
Before using your Planetary Mixmaster® Bench
Mixer
®
Before using your Planetary Mixmaster
Bench Mixer for the first time, remove any
packaging material and promotional labels
or tags. Please also remove the plastic
plug pin cover before using the mixer. It
is recommended to wash the mixing bowl,
beater, Scrapemaster
and dough hook in warm soapy water with a
soft cloth. Rinse and dry thoroughly.
Set-up
Before assembling your Planetary Mixmaster
Bench Mixer, be sure the power cord is
unplugged from the power outlet. Position
the mixer on a level, dry surface such as a
bench top.
1. Press the ‘head release’ button, located at
the rear of the mixer head. This will release
the mixer head out of its locked position.
Ease the mixer head backwards until it
locks into its tilt position (Fig. 1).
™
spatula beater, whisk
– Scrapemaster
for smaller amounts of mixture
or for faster creaming of butter
and sugar and heavy cake
mixes. Also great for folding
ingredients
– Whisk for whisking cream, egg
whites, light batters and packet
cake mixes.
– Dough hook for kneading dough
and other heavy mixtures.
®
3. Attach the selected mixing attachment onto
the mixing shaft, aligning the groove in
the top of the attachment such that it keys
into the locking pin on the shaft. Push the
attachment upwards over the locking pin
and turn clockwise until securely locked in
(Fig 2).
2.
™
spatula beater
Figure 1
2. Select the desired attachment depending
on the mixing task to be performed:
– Beater for creaming butter and
sugar, plus mixing heavy cake
mixes.
6
1.
Figure 2
Note: Be sure the attachment is locked firmly
in place.
Figure 3
Using your Café Series
continued
®
Planetary Mixmaster
®
Bench Mixer
Figure 4
4. Place the bowl on the base with the handle
facing you. Then gently rotate the bowl
in a clockwise direction until it locks into
position (Fig 3). The bowl should feel firm
with no movement.
5. Lower the mixer head with the selected
mixing attachment in place into the mixing
bowl. Press the ‘head release’ button to
un-lock it from its position and ease the
mixer head down (Fig. 4).
Using your Planetary Mixmaster
1. Position the mixer on a level, dry
surface such as a bench top. Ensure the
mixing bowl is in place and the desired
attachment is inserted.
2. Plug the power cord into a 230/240 Volt
AC power outlet.
3. A beep will sound and the LCD screen
will light up to inform you that the mixer
is now switched on. The LCD screen
will flash three times and the timer will
display “00:00”. The screen will also
display the speed setting. If the LCD
displays a speed setting other than “0”
and continues to flash, you may turn the
speed control dial anti-clockwise to the
“0” position to re-set the speed setting.
4a. If using the splashguard, add ingredients
to the mixing bowl through the pouring
shoot.
4b. If using the mixer without the
splashguard, release the mixer head
out of its locked position and ease it
backwards until it locks into its tilt
position. Add ingredients to the mixing
bowl. Then, un-lock the mixer head and
lower it forward into the mixing bowl.
5. Turn the speed control dial clockwise to
commence mixing (Fig. 6), or, if a speed
is already set, press the
®
Bench Mixer
button.
Figure 5
6. The splashguard can now be placed over
the bowl if desired (Fig 5).
Figure 6
7
Using your Café Series® Planetary Mixmaster® Bench Mixer
continued
The LCD screen will display the chosen speed
setting. Instructions for mixing speeds for
each type of mixture are shown in the ‘Mixing
Guide’ on page 12.
6. When mixing is complete, turn the speed
control dial anti-clockwise to the ‘0’
position (Fig. 7) and unplug the cord from
the power outlet.
Figure 7
7. Remove the splashguard if positioned on
the bowl.
8. Press the ‘head release’ button and ease
the mixer head back until it is locked into
the tilt back position
(see Figure 1 on page 6).
9. To remove the particular mixing
attachment, push it upwards, turn it anticlockwise, then pull it downwards (Fig 8).
Pause mode
At any stage during your mixing task you
can pause the mixer. This enables you to
assess the mixing progress, scrape any food
mixture down the sides of the mixing bowl
with a spatula, or add additional ingredients without affecting the timer.
Pause the mixer during operation by pressing
the
dial.
The time on the LCD screen will flash
continuously, displaying the mixing time at
which the mixer has been paused.
In pause mode, you are able to reset or
adjust the timer if desired. Please see details
on the Count-up and Count-down timer
features below.
To resume your mixing task, simply press
the
resume mixing at the same speed setting,
and the timer will resume counting up/down
depending on your selection made.
at the front of the speed control
button again. The mixer will
2.
1.
3.
Figure 8
8
Using your Café Series® Planetary Mixmaster® Bench Mixer
continued
Count-up timer
The count up timer informs you how long
your ingredients have been mixing for. The
next time you mix the same ingredients you
can then set the count-down timer for the
specific time.
As soon as you start mixing, the timer will
automatically start to count up.
The maximum mixing time is 20 minutes
and will be displayed on the LCD screen as
“20:00” (twenty minutes, zero seconds).
The mixer will automatically stop mixing after
20 minutes and beep twice.
The screen will flash for about 5 seconds.
The timer will automatically re-set to
“00:00”.
The LCD screen will display the speed
setting that it stopped at and this setting will
continue to flash.
If you pause the mixer at any time during the
mixing process by pressing the
at the front of the speed control dial, the
mixing time displayed on the LCD screen will
flash until you resume mixing by pressing the
button again.
To reset the timer to “00:00”, turn the speed
control dial anti-clockwise to the “0” location
or, when paused, press the ‘+’ and ‘-’ buttons
simultaneously.
button
Count-down timer
The count-down timer is especially useful
when following a recipe that specifies mixing
times.
The ‘+’ and ‘-’ buttons allow you to choose
the desired mixing duration. Press the
‘+’ button and you will add 30 seconds.
Press the ‘-’ button and you will reduce the
previously set mixing time by 30 seconds.
For example, if a recipe calls to “beat for
2 minutes”, you can set the count-down
timer to 2 minutes. Simply press the ‘+’
button until “02:00” is displayed on the LCD
screen, i.e. press the ‘+’ button four times.
If you would like to change the countdown
time after your initial setup, press the
button, then press the ‘+’ and ‘-’ buttons to
increase or reduce the mixing time to the
nearest 30 sec increment.
For example, you set the count-down timer
to 3 minutes and turn the speed control dial
to start mixing on a chosen speed. After 1
minute, 25 seconds, you pause the mixer by
pressing the
the remaining count-down time of 01:35. If
you now press the ‘+’ button once to increase
the mixing time, the display will show 02:00
(which is the nearest 30 sec increment).
To reset the timer to “00:00”, turn the speed
control dial anti-clockwise to the “0” location
or, when paused, press the ‘+’ and ‘-’ buttons
simultaneously.
When the chosen mixing time is completed,
the mixer will beep twice to inform you that
the time has expired. It will stop mixing
automatically. The timer display “00:00”
and the LCD screen will flash for about 5
seconds. The LCD screen will display the
speed setting that it stopped at and this
setting will continue to flash.
button. The LCD displays
9
Using your Café Series® Planetary Mixmaster® Bench Mixer
continued
If you need to resume mixing, simply press
the
mixer by turning the dial to “0”, and then
turn the dial clockwise.
button or, alternatively, reset the
Kitchen Timer function
The timer function can be used without
mixing as a kitchen timer or stopwatch.
Timer: Set the time as described in the
Count-down timer section on page 9, then
press the
(i.e. no speed selected).
When the set time expires, the mixer
will beep and the LCD screen will flash
continuously until the
Stopwatch: Simply press the
whilst in “0” (i.e. no speed selected). The
maximum time the LCD screen can display
is 90 minutes and will be displayed on the
LCD screen as “90:00” (ninety minutes, zero
seconds).
When the maximum time has been reached,
the mixer will beep and the time display on
the LCD screen will flash continuously until
the
To reset the timer to zero (“00:00”), press
the
buttons simultaneously.
button while the dial is in “0”
button is pressed.
button
button is pressed.
button, then press the ‘+’ and ‘-’
10
Loading...