Page 1
Typical Applications:
Technical Specification • Technical Specification • Technical Specification
Stephan COOK-IT
®
CI 400 (400 l batch volume)
Advantages:
• Easy filling and emptying
• Both gentle and effective mixing
• Constant product quality
• Good cleanability
• Easy to operate
Options:
• Direct steam nozzles
• Flushing water nozzles
• Sieve for removing cooking water
• Direct water metering
• Lifting / tilting device
• Steam conditioning unit
• Discharge valve (cooking water,
liquid products)
• PLC control system
• Ready meals
• Soups
• Rice, pasta, potatoes
• Vegetables
• Meat
• Poultry
• Stews
• Sauces
• Mixing
• Cooking • Roasting
• Indirect heating
• Direct heating
Picture: Stephan COOK-IT® CI 400
Page 2
Dimensions Stephan COOK-IT®CI 400:
Stephan Machinery GmbH & Co.
Stephanplatz 2 • D-31789 Hameln
phone: +49 (0) 51 51 / 583 - 0 • fax: +49 (0) 51 51 / 583 - 189
[email protected]. • www.stephan-machinery.com
Energy requirement
Machine Data:
Batch size, max.
Batch size, max.
Capacity, max. (depending on product)
Net weight, appr.
Max. operating temperature (COOK-IT vessel)
Max. operating pressure (vessel jacket)
Max. operating temperature (vessel jacket)
Material: • product side
• non-product side
• elastomers, product side
Shaft seals: • COOK-IT vessel
Connections:• compressed air
• steam supply
• water supply-recipe
Installed energy, appr.
Operating voltage / Protection
Drive motors: • mixing element, 16/32 U/min
• linear actuator - bowl
• linear actuator - cover
• lifting / tilting device
Steam: • theoretical requirement (nozzles, vessel)
• recommended supply
• steam supply pressure maximum
minimum
Water: • water supply pressure
• water supply - recipe -
(kg)
(l)
(l/h)
(kg)
0
C (0F)
barg (PSI)
0
C (0F)
kW
V/Hz / A
kW
kW
kW
kW
kg/h
kg/h
barg (PSI)
barg (PSI)
barg (PSI)
l/h
440
400
800
1700
95 (203)
10 (146)
180 (356)
1.4571 (AISI 316)
(V4A) or similar,
1.4301 (AISI 304) (V2A) or similar
HNBR, EPDM, FKM, Viton, PVDF
single mechanical seal
G
1
/4”
DN 32, DIN 11850, row 2, welding end
DN 40, DIN 11850, row 2, welding end
11
400/50 / 32 A, slow
2, 5/3
2.1
2.5
0.75
360
430
12 (175)
11 (160)
4 (58)
6000
Subject to alterations
as per March 2006
Technical Specification • Technical Specification • Technical Specification
overall hight with lid open: 3150 mm
L&S 03.06. ‘3e 5018
approx. 3900
approx. 2700
approx. 800
approx. 800
approx. 3400
approx. 3650
approx. 3800
approx. 2750
approx. 800
approx. 3000
approx.1900
approx. 1300
approx. 3150
approx. 3050
approx. 3100
approx. 2300
Loading...