How it Works
Stealth Cam
Loading...
STC-WD3MT
User Manual
47 pgs1.49 Mb0

Stealth Cam STC-WD3MT User Manual

Stealth Cam
STC-WD3MT
User’s Manual
Toll Free Customer Support 1-877-269-8490
www.stealthcam.net
Version 1.0 Dec/05
For Customer Service or Warranty Information Call Toll Free
877-269-8490
Stealth Cam, LLC
P.O. Box 211662
Bedford, Texas 76095
www.steatlhcam.net
Stealth Cam Limited Warranty
Your Stealth Cam is covered by a One Year Limited Warranty on parts
& labor from the date of purchase. The warranty covers defects in
workmanship & materials. The warranty does not apply to units, which
have been damaged or abused intentionally or unintentionally.
Tampering with or altering the unit will void the warranty. Any
unauthorized service will void warranty. Original sales receipt must be
produced for any warranty service. Questions call 877-269-8490
www.stealthcam.net Toll Free 877-269-8490
2
Manual Contents
Warranty 2
Camera overview 4
Camera kit contents 8
Battery and memory Installation 9
Set up and programming 13
Using the camera 22
Viewing & Deleting images 31
Using Solar Panel 39
CF Memory Card Compatibility Chart 41
Technical Specs 42
General Information 45
Moon phase symbol chart 47
www.stealthcam.net Toll Free 877-269-8490
3
Camera overview
Front housing image with major parts indication.
For use with Stealth Cam cable or 12V Battery Box. (sold separately)
www.stealthcam.net Toll Free 877-269-8490
4
Open view image with major parts indication
www.stealthcam.net Toll Free 877-269-8490
5
Side view with major parts indication
For use with Stealth Cam exclusive Monitor / TV sold separately
www.stealthcam.net Toll Free 877-269-8490
6
Picture / Image Capacity
CF card
High
3.0M
16MB 20 26 40 80 8
32MB 40 52 80 160 16
64MB 80 104 160 320 32
128MB 160 208 320 640 64
256MB 320 416 640 1280 128
512MB 640 832 1280 2560 256
1G 1280 1664 2560 5120 512
2G 2560 3328 5120 10240 1024
Med
2.0M
Low
1.3M
Base
0.3M
AVI
(10 sec)
NOTE: Picture / Image Capacity Chart provides approximate number of images or AVI movies based on resolution setting and the size of memory card. These figures may vary depending on the amount of detail in the image.
www.stealthcam.net Toll Free 877-269-8490
7
Camera kit contents
• Model STC-WD3MT Digital Scouting Camera
• CDROM (Contains Ulead Photo Express 8 and camera driver)
• User Manual
• 1.5M USB cable
• 1.5M TV out cable for TV (RCA Jack)
1.5M TV out cable for handheld TV (Mini Jack)
•
• Strap
• Tree screw with nut
• Washer x 2
Lock Plate
•
www.stealthcam.net Toll Free 877-269-8490
8
Battery & memory installation
Warning: Do not use different Voltage lead
acid battery other than the one specified in
The Stealth Cam STC-WD3MT Advanced Digital Scouting Camera is designed to operate using two different types of battery power options.
NOTE: Always have camera in OFF position when installing or removing batteries.
Batteries “C” cell
The internal battery compartment accepts 6 “C” cell batteries. Be
this section. Doing so will damage the camera and will void the warranty.
sure to use high quality brand name alkaline batteries. Install batteries in correct polarity (+/-) as noted inside battery compartment.
www.stealthcam.net Toll Free 877-269-8490
9
12V Lead Acid external battery
The STC-WD3MT is equipped with an external power jack designed to accept a barrel plug cable to attach to a sealed lead acid battery. (sold separately). Battery cable and complete 12V Lead Acid battery kits are available wherever Stealth Cam scouting cameras are sold or call toll free 877-269-8490. Only Stealth Cam external battery accessories are recommended.
• Make sure the camera power switch is OFF and power source switch on BATTERY.
• Insert the battery pack plug into the DC 12V jack of the bottom of camera housing
• Turn the camera power on.
Please make sure the voltage and polarity (+/-) are correct
before connection. Incorrect voltage or polarity (+/- ) will damage the camera.
www.stealthcam.net Toll Free 877-269-8490
10
Memory Options
Your STC-WD3MT camera is equipped with 32MB built in flash memory. The camera is also equipped with an expendable media card slot capable accepting up to 2GB Compact Flash card (sold separately.) With no memory card inserted into the slot, the camera will use the built in 32MB memory. If a Compact Flash card is inserted into the slot then the camera will bypass the built in memory and utilize the compact flash memory. The front counter display will show the number of images on the built in memory unless the expansion card is inserted at which point the counter will only show the number of images in the expansion card.
Inserting CF card
Make sure camera is in the OFF position when ever adding or removing memory.
• Insert CF memory card in to the CF card slot completely and in the correct direction as shown by the sticker located at the top of the housing.
• To remove the CF memory card by press the eject button which is on the upper of the card.
www.stealthcam.net Toll Free 877-269-8490
11
Compact flash cards must be clean (no images from other
sources), if you are using the CF card from other cameras, please make sure to format the CF card prior use in the STC-WD3MT. New cards are good to use straight from the package.
www.stealthcam.net Toll Free 877-269-8490
12
Set up and Programming.
When the camera is first turned on the internal LCD screen displays the camera status. The following information is present on this screen.
If no buttons are pressed after 30 seconds the LCD screen will power down to conserve battery life. To re-power the screen press and hold the UP or DOWN button for at least 5 seconds.
Time out:
•
sleep between PIR triggering.
Flash Control:
•
o
Auto: In low light conditions the flash will automatically activate.
To set the amount of time in minutes the camera will
www.stealthcam.net Toll Free 877-269-8490
13
o
Capture mode:
•
o 1P:
o 2P: Two images continuous capturing per PIR triggering.
o 3P:
o Video:
o Manual:
Resolution:
•
o
o
Flash Off: Turn off flash light
The capture mode that you have selected.
Single image capturing per PIR triggering.
Three images continuous capturing per PIR triggering.
Taking 10 seconds video per PIR triggering.
Manual capturing by press manual shutter to
operate only. (use as point and shoot camera)
The resolution selection that you have selected.
3.0M: Select this option to capture a 3.0M pixels image.
2.0M: Select this option to capture a 2.0M pixels image.
o
1.3M: Select this option to capture a 1.3M pixels image.
o
VGA: Select this option to capture a 300K pixels image.
o Video resolutions: This is the resolution during video
capturing and resolution is 100K pixels.
www.stealthcam.net Toll Free 877-269-8490
14
Batteries Status:
•
o Full:
o Half:
o Low: It shows the batteries are low and front battery
indicator will be on also.
When the camera has detected low batteries, (Batteries are
lower then 6.6 +/-0.2Volts) the camera unit will power off within 30 seconds automatically. Please replace with new batteries; otherwise the camera will not work properly.
Day and Time:
•
Moon phase and Temperature:
•
temperature.
It shows the batteries are full.
It shows the batteries are half.
It shows the battery status.
It shows the
date and time that you have set.
It shows the moon phase and
www.stealthcam.net Toll Free 877-269-8490
15
Loading...
+ 32 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use