Stealth Cam STC-DVIR5 User Manual

STC-DVIR5 PROWLER
User’s Manual
Toll Free Customer Support 1-877-269-8490
www.stealthcam.net
Version 1.0 07/07
STC-DVIR5 PROWLER
For Customer Service or Warranty Information Call Toll Free
877-269-8490
Stealth Cam, LLC
P.O. Box 539504
Grand Prairie, TX 75053-9504
www.steatlhcam.net
Stealth Cam Limited Warranty
Your Stealth Cam scouting camera is covered by a 90 days Limited Warranty on parts and labor from the date of original purchase, and purchases must be
made through an authorized dealer. The warranty covers defects in
workmanship and materials. The warranty does not apply to units, which have
been damaged or abused intentionally or unintentionally. A purchase from
individuals or unauthorized internet sites voids the warranty.
Tampering with or altering the unit will void the warranty. Any unauthorized
service will void warranty. Original sales receipt must be produced for any
warranty service and a Return Authorization (RA) number must be obtained
from customer service at 877-269-8490 prior to returning product.
2
STC-DVIR5 PROWLER
Manual Contents
Camera overview 4
Camera kit contents 8
Battery and memory Installation 9
Set up and programming 12
Camera use 20
Mounting the camera 21
Viewing & Deleting images 27
Memory compatibility chart 36
Technical Specs 37
General Information 41
Moon phase chart 43
3
STC-DVIR5 PROWLER
Camera overview
Front housing image with major parts indication.
4
STC-DVIR5 PROWLER
Open view image with major parts indication
5
STC-DVIR5 PROWLER
Side view with major parts indication
6
STC-DVIR5 PROWLER
Picture / Image Capacity
AVI
(in seconds)
SD card
16MB
32MB
64MB
128MB
256MB
512MB
1 GB
2 GB
High Low Base
Color B&W Color B&W Color B&W Color B&W
16 53 32 80 80 160 40s 45s
32 106 64 160 160 320 80s 90s
64 212 128 320 320 640 160s 180s
128 424 256 640 640 1280 320s 360s
256 848 512 1280 1280 2560 640s 720s
512 1696 1024 2560 2560 5120 1024s 1440s
1024 3392 2048 5120 5120 10240 2048s 2880s
2048 6784 4096 10240 10240 20480 4096s 5760s
NOTE: Picture / Image Capacity Chart provides approximate number of images or AVI movies based on resolution setting and the size of memory card. These figures may vary depending on the amount of detail in the image.
7
STC-DVIR5 PROWLER
Camera kit contents
Model STC-DVIR5 PROWLER Digital Scouting Camera
CDROM (Contains Ulead Photo Explorer 8.0 and camera
driver)
User Manual.
USB cable.
TV out cable for TV (RCA Jack).
TV out cable for handheld TV (Mini Jack).
Strap.
8
STC-DVIR5 PROWLER
Warning:
Battery & memory installation
acid battery other than the one specified in this section. Doing so will damage the camera and will void the warranty.
Do not use different Voltage lead
The Stealth Cam STC-DVIR5 PROWLER Advanced Digital Scouting Camera is designed to operate using two different types of battery power options.
NOTE: Always have camera in the OFF position when installing or removing batteries.
Batteries “C” cell
The internal battery compartment accepts 6 “C” cell batteries. Be sure to use high quality brand name alkaline batteries. Install batteries with correct polarity (+/-) as noted inside the battery compartment.
9
STC-DVIR5 PROWLER
12V Lead Acid external battery
The STC-DVIR5 PROWLER is equipped with an external power jack designed to accept a barrel plug cable to attach to a sealed lead acid battery. (sold separately). Battery cable and complete 12V Lead Acid battery kits are available wherever Stealth Cam scouting cameras are sold or call toll free 877-269-8490. Only Stealth Cam external battery accessories are recommended.
Insert the external battery barrel plug into the DC 12V jack on the bottom of camera housing
Turn the camera power on.
Please make sure the voltage and polarity (+/-) are correct
before connection. Incorrect voltage or polarity (+/-) will damage the camera.
Memory Options
Your STC-DVIR5 PROWLER camera is equipped with 32MB built in flash memory. The camera is also equipped with an expandable media card slot capable of accepting up to 2GB SD card (sold separately). With no memory card inserted into the slot,
10
STC-DVIR5 PROWLER
the camera will use the built in 32MB memory. If an SD card is inserted into the slot then the camera will bypass the built in memory and utilize the SD memory. The front counter display will show the number of images on the built in memory unless the expansion card is inserted at which point the counter will only show the number of images in the expansion card.
Inserting SD card
Make sure camera is in the OFF position whenever adding or removing memory.
Insert SD memory card in to the SD card slot completely and in the correct direction as shown by the sticker located at the side of the housing.
To remove the SD memory card, depress the SD card and pull out the card gently.
SD cards must be clean (no images from other sources). If
you are using the SD card from other cameras, please make sure to format the SD card prior use in the STC­DVIR5 PROWLER. New cards are good to use straight from the package.
11
STC-DVIR5 PROWLER
Set up and Programming
When the camera is first turned on the internal LCD screen displays the camera status. The following information is present on this screen.
If no buttons are pressed after 30 seconds the LCD screen
will power down to conserve battery life and enter 1 minute count down to enter PIR detection mode. To re­power the display screen press and hold the UP or DOWN button for at least 5 seconds.
12
STC-DVIR5 PROWLER
Definition
Time out: To set the amount of time in minutes the camera will sleep between PIR triggering.
Capture mode:
o 1P ~ 9P: 1 to 9 burst mode image capturing per PIR
triggering.
o Video: 5 to 90 seconds adjustable video per PIR triggering.
Resolution:
Color Day time o 5.0M : Select this option to capture a 5.0M pixels image.
(High image quality)
o 3.0M : Select this option to capture a 3.0M pixels image.
(Low image quality)
o 1.3M : Select this option to capture a 1.3M pixels image.
(Base image quality)
o Video resolution (640 x 480): This is the resolution during
video capturing.
13
Loading...
+ 30 hidden pages