R E S I D E N T I A L
SELECT®
Residential Power Vent Gas Water Heaters
State Select® Power Vent 40 and 50-gallon gas water heaters now feature a patented FVIR Compliant design, which meets Phase II of the ANSI Z21.10.1 standards for flammable vapor ignition resistance. A power vent water heater is an excellent alternative for many replacement applications where a conventional vertical vent model is not a practical option and offers versatility for installations of gas water heaters in residential new construction.
Enhanced Power Vent Capabilities
•System allows combined horizontal and vertical vent runs up to 120 equivalent feet with 3” pipe, up to 160 equivalent feet with 4" pipe on 40,000 BTU and 50,000 BTU models
•40 and 50-gallon models vent using 2", 3" or 4" Schedule 40 PVC, CPVC or ABS pipe
•Supplied with termination screens and elbow
•See next page for complete information on vent capabilities
Intelli-Vent™ Electronic Gas Control
•Silicon nitride hot surface ignitor provides superior durability and eliminates standing pilot
•Advanced design ensures precise control of water temperature; simplifies diagnostics
•Gas connection located on side of control, same as conventional gas control
Diffuser Dip Tube
•Reduces lime and sediment buildup, maximizes hot water output
•Made from PEXAN™, a cross-linked polymer that can withstand long-term exposure to temperatures up to 400ºF
Patented Glasslined Tank with Aluminum Anode Rod
• For long-lasting protection against corrosion or sediment buildup
Advanced Power Vent Blower Design
•Equipped with 110/120 volt electrical system (rating 3 amps or less), 6-foot cord with standard 3-prong male connector
•Patented design reduces NOx emissions by up to 33% and meets less than 40 ng/j requirements for low NOx
Durable, Tamper-Resistant Brass Drain Valve CSA Certified and ASME Rated T&P Relief Valve Design-Listed by Underwriters Laboratories
•Listed according to ANSI Z21.10.1 - 10.3 - CSA 4.1 - 4.3 standards governing storage-type water heaters
•Code compliance: UBS, CEC, SBCC, CABO, HUD, BOCA National codes. Meets the the thermal efficiency and standby loss requirements
of the U.S. Department of Energy and Current Edition of ASHRAE/IESNA 90.1 and Federal Energy Efficiency Standards Effective January 20, 2004, according to the National Appliance Energy Conservation Act (NAECA) of 1992.
GAS-FIRED
GAS-FIRED
Maximum Hydrostatic Working Pressure: 150 psi
FVIR Compliant Gas Water Heater Design
•See other side 6-Year Limited Tank and Parts Warranty
•Consult written warranty or contact State Water Heaters for complete information.
Low Lead Content
For more information on State® contact: State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA www.statewaterheaters.com
SRGSS00905 |
Revised June 2011 |
Intelli-Vent™ is a trademark of
Emerson Electric Company
|
|
|
|
Page 1 of 2 |
©2011 State Water Heaters |