Soundcraft ETAGS8 User Manual

e*Tag® ET8-FF-II-H-C-oovv Installation Instructions

Installation Steps for Decorator Reader

1. This reader is designed for installation using a standard, single-gang electrical box or trim ring.

2. Splice reader wires to cable that has been home run to the access control panel (see wiring color chart) and trim unused wire ends. (Violet, gray, yellow and blue wires are often not used.) Push splices into the box.

3. Attach the reader to the box mounting tabs with the 6-32 screws provided.

4. Install the cover plate with the screws that are provided in the package.

ET8-FF-II-H-C-oovv

FCC ID: NNHETAGS8 IC ID: 5718A-ETAGS8 ASSY#: 201XXXX LOT#: XXXXXX

SER#: XXXXXXX

INSTALLATION DIAGRAM

Standard

Electrical Box

Mounting

Surface

Cover plate

Use 6-32

supplied

screws

SPECIFICATIONS:

POWER REQUIREMENTS

5-14 VDC; Idle: 30 mA, When reading card: 65mA

INPUTS & OUTPUTS

Wiegand Output Sink Current 100mA Wiegand Output Source Current 5mA LED Bi-color (Red or Green) Buzzer Ground to Activate Hold Ground to Activate Cable Distance 500 ft. Cable Type 6-8 Conductor, 18-22 AWG

ENVIRONMENT

Ambient Temperature -40° to +70°C (-40° to +158°F) Humidity 0 to 90% (non-condensing)

COMMUNICATIONS

Wiegand Industry Standard Protocol

“Changes or modiﬁ cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment”.

FCC Warning: This device complies with Part 15 of the Class B FCC Rules. Operation is subject to the following two conditions: (1) This

20301 Nordhoff Street • Chatsworth, CA 91311 phone 818-882-0020 • fax 818-882-7052 TOLL-FREE (800) 891-0020 Web site: www.securakey.com

3322058 6435

device may not cause harmful interference. And (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.

2.75”

1.80”

4.50”

2.60”

#OVER0LATE

1.20”

Wire Color ET8-FF-II-H-C-oovv

GREEN Wiegand Data 0

WHITE Wiegand Data 1

VIOLET N/A

GRAY N/A

ORANGE Green LED

BROWN Red LED

YELLOW Buzzer

BLUE Hold Line

RED 5-14VDC +

BLACK DC Ground

ET8-FF-II-H-C-oovv

)63003-AABFAg

4.14”

RoHS

3059349

3.14”