Sony Ericsson ICD PX720 User Manual [es]

This Quick Start Guide describes only basic operations, such as how to record, play back, or erase messages. The operating instructions explaining all the features and functions are supplied with the IC recorder as PDF les in 19 languages stored on the supplied CD-ROM. You can copy the PDF les of the operating instructions to your computer. Insert the supplied CDROM into the CD-ROM drive of your computer, and just follow the instructions shown on the screen. If the instructions are not shown on the screen, rightclick the CD-ROM on Windows Explorer to open, and double-click [SetupLauncher.exe]. The English edition of the operating instructions is supplied as a booklet as well.

For customers in Europe

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its

packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this

will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Oce, your household waste disposal service or the shop where you purchased the product.

product is disposed of correctly, you

Applicable accessory: USB connecting cable

Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)

This symbol on the battery or on the

packaging indicates that the battery provided with this product shall not be treated as household waste.

disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualied service sta only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Oce, your household waste disposal service or the shop where you purchased the product.

By ensuring these batteries are

Notice for the customers: the following information is only applicable to equipment sold in the countries applying EU directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelnger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

The recorded music is limited to private use



only. Use of the music beyond this limit requires permission of the copyright holders.

Sony is not responsible for incomplete



recording/downloading or damaged data due to problems of the IC recorder or computer.



Depending on the types of the text and characters, the text shown on the IC recorder may not be displayed properly on device. This is due to:

The capacity of the connected IC recorder.



The IC recorder is not functioning normally.



Content information is written in the



language or the character that is not supported by the IC recorder.

Notice for users

All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation.

IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

Sony Corporation reserves the right to make any modication to this manual or the information contained herein at any time without notice. The software described herein may also be governed by the terms of a separate user license agreement.

This software is for Windows and cannot be used



for Macintosh. The supplied connecting cable is for the IC recorder



ICD-PX720. You cannot connect other IC recorders.

Table of Contents

Checking the Contents of

the Package .......................................................... 4

Checking the Contents of the Package

Getting Started

Step 1: Preparing a Power Source ..........5

Step 2: Setting the Clock .............................. 6

Turning the IC Recorder On or Off ......... 7

Recording

Recording Messages....................................... 8

Playback

Playing Back Messages .................................. 9

Editing Messages

Erasing Messages............................................10

Erasing messages one by one ...........10

Erasing all messages in a folder ........11

Utilizing Your Computer

Using the Supplied Digital Voice Editor

Software ...............................................................12

Additional Information

Precautions .........................................................15

IC Recorder (1)

Remove the film on the display window before you use the IC recorder.

LR03 (size AAA) alkaline batteries (2)

USB connecting cable (1)

CD-ROM(1)

Application Software, Digital Voice Editor



Operating instructions (PDF files)



Stereo headphones* (1)

Carrying pouch* (1)

Operating Instructions

* The stereo headphones, carrying pouch are

supplied with some models in some regions only.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Getting Started

Step 1: Preparing a Power Source

Remove the lm on the display window before you use the IC recorder.

Inserting the batteries

1 Slide and lift the batterybattery

compartment lid.

2 Insert LR03 (size AAA) alkaline

batteries with correct polarity, and close the lid.

If the battery compartment lid is accidentally detached, attach it as illustrated.

Step 2: Setting the Clock

DISPLAY/

Continued directly from “Step 1: Preparing a Power Source”

1 Press – or + to set the year,

month, day, hour, and minute in sequence, then press  PLAY/ STOP•ENTER.

 

–,

+

You need to set the clock to use the alarm function or record the date and time. Clock setting display appears when you insert batteries for the rst time, or when you insert batteries after the IC recorder has been without batteries for a certain period of time the year section ashes in the display window.

PLAY/ STOP• ENTER

2 Press  (stop) to return to the

display of the stop mode.

Turning the IC Recorder On or O

When you are not using the IC recorder, you can prevent the batteries from getting weak quickly by turning the power o.

Turning the power o

Slide the HOLD switch in the directionHOLD switch in the direction of the arrow in the stop mode. “HOLD” ashes. The IC recorder turns o within a few seconds.

Turning the power on

Slide the HOLD switch in the opposite direction from that of the arrow. The IC recorder turnes on.

Tips



When you are not going to use the IC



recorder for a long time, we recommend to turn off the IC recorder.

When 10 minutes have passed after you



have turned on the IC recorder and leave it without doing anything, the display goes off automatically. (Press any button to show the display.)

Recording

Recording Messages

Built-in microphones

Operation indicator

 REC/

PAUSE



–,

+

1 Select a folder.



Press and hold DISPLAY/MENU to enter the menu mode.



Press – or + to select “FOLDER,” then press  PLAY/ STOP•ENTER.



Press – or + to select the folder you want ( , , , , or ), then press  PLAY/STOP•ENTER.



Press  (stop) to exit the menu mode.



PLAY/ STOP• ENTER

2 Start recording.



Press  REC/PAUSE in the stop mode. The operation indicator lights in red.operation indicator lights in red. (When “LED” is set to “OFF” in the menu, the operation indicator does not light.) You do not need to press and hold

 REC/PAUSE while recording.

The new message will be automatically recorded after the last recorded message.



Speak into the built-in microphones.

3 Press  (stop) to stop recording.stop) to stop recording.

The IC recorder stops at the beginning of the current recording.

If you do not change the folder after you stop recording, the next time you record you will record in the same folder.

Playback

Playing Back Messages

Operation

indicator

DISPLAY/



–,

+

1 Select a folder.



Press and hold DISPLAY/MENU to enter the menu mode.



Press – or + to select “FOLDER,” then press  PLAY/ STOP•ENTER.



Press – or + to select the folder you want ( , , , , or ), then press  PLAY/STOP•ENTER.



Press  (stop) to exit the menu mode.

VOL +, –



PLAY/ STOP• ENTER

2 Press –– or + to select the

message you want to play.

3 Press  PLAY/STOP•ENTER to startPLAY/STOP•ENTER to start

playback.

operation indicator lights in green.

The operation indicator lights in green. (When “LED” is set to “OFF” in the menu, the operation indicator does not light.)

4 Press �OL + or – to�OL + or – to adjust the

volume.

5 Press  (stop) to stop playback.stop) to stop playback.

Editing Messages

Erasing Messages

You can erase the recorded messages one by one or all messages in a folder at a time.

Notes



Once a recording has been erased, you



cannot retrieve it. If the message you want to erase is locked in



the menu, the message is not erased.

Erasing messages one by one

ERASE



You can erase unwanted messages, retaining all other messages when the IC recorder is in the stop or playback mode. When a message is erased, the remaining messages will advance and be renumbered so that there will be no space between messages.

1 Press ERASE while you are playingERASE while you are playing

back the message you want to erase or press and hold ERASE during the stop mode.

A beep will sound and the message number and “ERASE” will ash.

2 Press ERASE again.

The message is erased and the remaining messages will be renumbered. (For example, if you erase Message 3, Message 4 will be renumbered as Message 3. When erasing is completed, the unit will stop at the beginning of the following message.)

To cancel erasing

Press  (stop) before step 2.

To erase another message

Proceed with the same steps again from the beginning.

To erase a part of one message

Divide the message into two messages rst, then proceed with the same steps from the beginning.

Erasing all messages in a folder

DISPLAY/

 

–,

+

PLAY/ STOP• ENTER

1 Select the folder containing the

messages you want to erase when the IC recorder is in the stop mode.

2 Press and hold DISPLAY/MENU to

enter the menu mode.

The menu mode window will be displayed.

3 Press – or + to select “ALL

ERASE,” then press PLAY/ STOP•ENTER.

4 Press  PLAY/STOP•ENTER while

“ALL ERASE” is ashing.

All messages in the selected folder will be erased.

5 Press  (stop) to exit the menu

mode.

To cancel erasing

Press  (stop) before step 3.

Utilizing Your Computer

Using the Supplied Digital Voice Editor Software

System requirements

Operating Systems:

Windows Vista® Ultimate Windows Vista® Business Windows Vista® Home Premium Windows Vista® Home Basic Windows® XP Media Center Edition 2005 Service Pack 2 or higher Windows® XP Media Center Edition 2004 Service Pack 2 or higher Windows® XP Media Center Edition Service Pack 2 or higher Windows® XP Professional Service Pack 2 or higher Windows® XP Home Edition Service Pack 2 or higher Windows® 2000 Professional Service Pack 4 or higher Pre-Installed

Note



64bit OS is not supported.

Hardware Environment:

Computer: IBM PC/AT or compatible CPU : 266 MHz Pentium® II processor or

higher (For Windows Vista®, 800MHz Pentium® III processor or higher)

RAM: 128MB or more (For Windows

Vista®, 512MB or more) Hard disk space: 150MB or more CD-ROM drive (When creating an audio

CD or data CD, a CD-R/RW drive is

needed) Port: USB port Sound board: Sound cards compatible

with any of the supported Microsoft®

Windows® operating systems Display: High color (16bit) or more and

800x480 dots or more Internet access for Voice Mail function

and CD database service

Note



The following systems are not supported:

Any operating system other than the ones



indicated above

Personally assembled PCs or operating



systems

Upgraded operating systems



Multi-boot environment



Multi-monitor environment



Installing the software

Install the Digital Voice Editor software on your computer’s hard disk.

1 Make sure that the IC recorder is

not connected, then turn on your computer and start up Windows.

2 Insert the supplied CD-ROM into

the CD-ROM drive.

The [IC Recorder Software Setup] menu starts up automatically and the [Welcome to IC Recorder Software Setup] window appears. If the [Welcome to IC Recorder Software Setup] menu does not start up, open the [DVE] folder in the [Setup] folder on the CD-ROM, then double click [setup.exe].

3 Make sure that you accept the

terms of the license agreement, select [I accept the terms of the license agreement], then click [Next].

The [Software Install] window appears.

4 Select [Digital �oice Editor], then

click [Install].

Follow the instructions on the screen to make the settings required for installation.

If you have already installed a previous version of the Digital Voice Editor or any version of the “Memory Stick Voice Editor”

The dialog box used to uninstall a previous version of the Digital Voice Editor or any version of the “Memory Stick Voice Editor” will be displayed. Follow the instructions on the screen to uninstall the software. The message les are not removed.

Note



If any illegal data modification is attempted, or a file is used for other than private purposes, the file may become unplayable or the Digital Voice Editor may become inoperable.

When the dialog box used to select how to save les is displayed

When you save les recorded using the IC recorder onto the computer named above, you can select whether you wish to convert them into the MP3 format. Select the desired setting.

When the dialog box used to select the language to be used for the help is displayed

Click the language you want to use for the help.

5 When the [Ready to Install the

Program] window appears, click [Install].

The installation starts.

6 When the [InstallShield Wizard

Complete] window appears, select [Yes, I want to restart my computer now], then click [Finish].

The computer will be restarted. When the computer has been

restarted, installation is completed.

Referring to the help les

For details on each operation, refer to the help les.

Help

Additional Information

Precautions

On power

Operate the unit only on 3.0 V or 2.4 V



DC. Use two LR03 (size AAA) alkaline batteries or two NH-AAA rechargeable batteries.

On safety

Do not operate the unit while driving,



cycling or operating any motorized vehicle.

On handling

Do not leave the unit in a location



near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.

Should any solid object or liquid fall



into the unit, remove the batteries and have the unit checked by qualied personnel before operating it any further.

On noise

Noise may be heard when the unit



is placed near an AC power source, a uorescent lamp or a mobile phone during recording or playback.

Noise may be recorded when an



object, such as your nger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth



slightly moistened in water. Do not use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit, please consult your nearest Sony dealer.

Backup recommendations

To avoid potential risk of data loss caused by accidental operation or malfunction of the IC recorder, we recommend that you save a backup copy of your recorded messages on a tape recorder or to a computer, etc.

Ce guide de démarrage rapide décrit uniquement les opérations de base, telles l’enregistrement, la lecture ou l’e acement de messages. Le mode d’emploi décrivant toutes les caractéristiques et fonctions est fourni avec l’enregistreur IC sous la forme d’un  chier PDF en 19 langues et enregistré sur le CD-ROM fourni. Vous pouvez copier les  chiers PDF du mode d’emploi sur votre ordinateur. Insérez le CD-ROM fourni dans le lecteur de CD-ROM de votre ordinateur, puis suivez les instructions à l’écran. Si les instructions ne s’a chent pas à l’écran, faites un clic droit sur le CD-ROM sous Windows Explorer pour l’ouvrir, puis double-cliquez sur [SetupLauncher.exe]. L’édition anglaise du mode d’emploi est aussi fournie sous la forme d’un livret.

Modèle européen seulement

Traitement des appareils électriques et électroniques en n de vie (Applicable dans les pays de l’Union Européenne et aux autres pays européens disposant de systèmes de collecte sélective)

Ce symbole, apposé sur le produit ou sur son emballage, indique que ce produit ne doit pas être traité avec les déchets ménagers. Il doit être remis à un point de collecte approprié pour le recyclage des équipements électriques et électroniques. En s’assurant que ce

mis au rebut de manière appropriée, vous aiderez à prévenir les conséquences négatives potentielles pour l’environnement et la santé humaine. Le recyclage des matériaux aidera à préserver les ressources naturelles. Pour toute information supplémentaire au sujet du recyclage de ce produit, vous pouvez contacter votre municipalité, votre déchetterie ou le magasin où vous avez acheté le produit.

Ceci s’applique à l’accessoire suivant : Câble de raccordement USB

produit est bien

Elimination des piles et accumulateurs usagés (Applicable dans les pays de l’Union Européenne et aux autres pays européens disposant de systèmes de collecte sélective)

Ce symbole, apposé sur les piles et accumulateurs ou sur les emballages, indique que les piles et accumulateurs fournis avec ce produit ne doivent pas être traités comme de simples déchets

et accumulateurs sont mis au rebut de façon appropriée, vous participez activement à la prévention des conséquences négatives que leur mauvais traitement pourrait provoquer sur l’environnement et sur la santé humaine. Le recyclage des matériaux contribue par ailleurs à la préservation des ressources naturelles. Pour les produits qui pour des raisons de sécurité, de performance ou d’intégrité de données nécessitent une connexion permanente à une pile ou à un accumulateur, il conviendra de vous rapprocher d’un service technique qualié pour eectuer son remplacement. En rapportant votre appareil électrique en n de vie à un point de collecte approprié vous vous assurez que la pile ou l’accumulateur incorporé sera traitée correctement. Pour tous les autres cas de gure et an d’enlever les piles ou accumulateurs en toute sécurité de votre appareil, reportez-vous au manuel d’utilisation. Rapporter les piles ou accumulateurs usagés au point de collecte approprié pour le recyclage. Pour toute information complémentaire au sujet du recyclage de ce produit ou des piles et accumulateurs, vous pouvez contacter votre municipalité, votre déchetterie locale ou le point de vente où vous avez acheté ce produit.

ménagers. En vous assurant que ces piles

Remarque à l’intention des clients : les informations suivantes ne concernent que l’équipement vendu dans les pays appliquant les directives européennes

Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japon. Le représentant autorisé pour les questions de compatibilité électromagnétique (EMC) et la sécurité des produits est Sony Deutschland GmbH, Hedelnger Strasse 61, 70327 Stuttgart, Allemagne. Pour toute question relative au SAV ou à la garantie, merci de bien vouloir vous référer aux coordonnées contenues dans les documents relatifs au SAV ou la garantie.

La musique enregistrée est limitée à un usage



privé exclusivement. L’utilisation de la musique au-delà de cette limite nécessite l’autorisation des détenteurs des droits d’auteur.

Sony ne peut être tenu responsable de tout



enregistrement ou téléchargement incomplet ou de dommages causés aux données suite à des problèmes rencontrés par l’enregistreur IC ou l’ordinateur.

Selon le type de texte et de caractères, le



texte aché sur l’enregistreur IC peut ne pas apparaître correctement sur l’appareil. Ceci est dû :

aux caractéristiques techniques de



l’enregistreur IC raccordé ; à un défaut de fonctionnement de



l’enregistreur IC ; à des informations écrites dans une langue



ou avec des caractères non pris en charge par l’enregistreur IC.

Notice destinée aux utilisateurs

Tous droits réservés. Le présent mode d’emploi et le logiciel qui y est décrit ne peuvent être reproduits, traduits ou réduits, en tout ou en partie, sous quelque forme compréhensible pour une machine que ce soit sans l’autorisation écrite préalable de Sony Corporation.

EN AUCUN CAS, SONY CORPORATION NE POURRA ETRE TENUE RESPONSABLE DE TOUT DOMMAGE DIRECT, INDIRECT, OU SPECIAL LIE A UN ACTE DELICTUEUX, UN CONTRAT OU AUTRE, QUI DECOULE OU EST A METTRE EN RELATION AVEC LE PRESENT MODE D’EMPLOI, LE LOGICIEL OU TOUT AUTRE INFORMATION QU’IL CONTIENT, OU ENCORE DE SON UTILISATION.

Sony Corporation se réserve le droit de modier ce manuel ou les informations qu’il contient à tout moment sans préavis. Le logiciel décrit dans le présent mode d’emploi peut également être soumis aux conditions d’un contrat de licence utilisateur séparé.

Ce logiciel est destiné à Windows et ne peut pas



être utilisé sur Macintosh. Le câble de raccordement fourni est uniquement



réservé à l’enregistreur IC ICD-PX720 Vous ne pouvez pas raccorder d’autres enregistreurs IC.

Table des matières

Vérification du contenu de l’emballage .... 4

Préparation

Etape 1 : Préparation d’une source

d’alimentation ....................................................5

Etape 2 : Mise sous/hors tension de

l’enregistreur IC ..................................................7

Enregistrement

Enregistrement de messages....................8

Lecture

Lecture de messages......................................9

Edition de messages

Effacement de messages ...........................10

Réglage de l’horloge .................. 6

Effacement de messages un par un ....10

Effacement de tous les messages

d’un dossier ...................................................11

Vérication du contenu de l’emballage

Enregistreur IC (1)

Retirez le film de la fenêtre d’affichage

avant d’utiliser l’enregistreur IC.

Piles alcalines LR03 (AAA) (2)

Câble de raccordement USB (1)

CD-ROM (1)

Logiciel d’application, Digital Voice Editor



Mode d’emploi (fichiers PDF)



Casque stéréo* (1)

Etui* (1)

Mode d’emploi

* Le casque stéréo et l’étui sont fournis avec

certains modèles dans certaines régions uniquement.

Utilisation de l’ordinateur

Utilisation du logiciel Digital Voice

Editor fourni .......................................................12

Informations complémentaires

Précautions .........................................................15

Vous êtes informé que toute modification qui n’est pas expressément approuvée dans ce mode d’emploi peut annuler votre autorisation à faire fonctionner cet appareil.

+ 42 hidden pages