Sony XM-GS100 Marketing Specifications

XM-GS100

The Sony® GS-100 Class-D subwoofer amplier aords incredible
installation exibility thanks to its compact size and packs quite a punch.
GS series ampliers oer tremendous value including convenience
features such as: modern cosmetics, variable cross-overs and singe-side
electrical connections to suit almost any application.

Bullets

• Compact chassis size

• 330W x 1 RMS at 4 Ohms

• 600W x 1 max power at 4 Ohm

• 600W x 1 RMS at 2 Ohms

• 1100W x 1 max power at 2 Ohm

• Dynamic Distortion Suppression

• Active Thermal Control

• High Level Input with Sensing Power On

• Variable LPF

• Subsonic Filter

• Bass Boost

• 3 year warranty

1

GS sereis Class-D Subwoofer Amplier

Features

Amp Design

The XM-GS100's ecient Class-D mono block design, compact chassis size and single sided
connections provide multiple mounting options while maximizing output and control for your
audio system.

4 Ohm Power Output

The XM-GS100 delivers 330 watts RMS power at 4 ohm with 14.4 volts, from 20 Hz - 200 Hz with less
than 1% THD+N. This unit has a maximum output power of 600 mono at 4 ohm.

2 Ohm Power Output

The XM-G100 delivers 600 watts RMS power at 2 ohm with 14.4 volts, at 50 Hz with less than 1%
THD+N. This unit has a mximum output power of 1100 watts mono at 2 ohm.

Built-in Crossovers

The XM-GS100 has a removable top panel that conceals a variable 12 dB/oct LPF (Low-Pass
lter) at 50-300Hz as well as a 12 dB/octave sub-sonic HPF (High-Pass lter), variable at 6-70Hz
to maximize your systems potential. This amplier also oers a variable 0-10 dB 40 Hz bass boost
circuit to increase low frequency response.

Input Flexibilty

As well as traditional RCA inputs, the XM-GS100 oers direct connections (High Level Input) to
the speaker output of your car audio unit if it is not equipped with RCA line outputs. The auto
sensing, high level input feature also allows the amplier to be powered up without the need for
remote power turn on connections.

Protection Circuitry

The Active Thermal Control regulates the units operating temperature for stable, long-term
playback at high volume levels. Dynamic Distortion Suppressor reduces distortion that occurs at
higher playback levels for clear bass reproduction.

Warranty

The XM-GS100 includes a 3 year warranty.

Specications

Amplier Section

Max power output

Power Ad Hoc

Speaker Impedance

Audio

Band

Circuit System

Frequency Response

Harmonic Distortion

Impedance

Input Level

Low Boost

Noise Level

Power Supply

Signal Circuitry

Audio Features

Level Control

Convenience Features

Illumination

Inputs and Outputs

Audio In

Audio Out

Input(s)

Line Level Input(s)

Output(s)

RCA Audio Input(s)

Power

Current Drain

Input Voltage

Internal Power Supply

Output Power

1100W max power

330W at 4 Ohm from 20Hz-200Hz with 1% THD

2-8 Ohm stereo
4-8 Ohms mono

Low Pass Filter: 50-300Hz, -12dB/Oct

Class D Technology
Pulse Power Supply

10-300kHz (+/-0dB)

0.1% or less (50Hz)

2-8 Ohms mono

0.3-6.0V (RCA pin jacks)

6.5-16.0V (High Level input)

0-10dB (40Hz)

65 dBA

Class D Technology
Pulse Power Supply

6-70Hz Variable -12 dB/Octave Subsonic lter

High Level Input: 6.5 - 16V

Blue illumination

RCA Pin Jacks
High Level input connector

Speaker Terminals

RCA Pin Jacks
High Level input connector

RCA pin jacks

Speaker Terminals

Pin Jacks: 0.3 - 6V

At rated output: 45 Amp (at 4 Ohms)

10.5-16V Power Supply Voltage

Class D Technology
Pulse Power Supply

Maximum Output: 600W (at 4 Ohms); 1100Wx1 (at 2 Ohms)

1

Power Requirements

Rated Output

Speaker

Impedance

Speaker Terminal Type

Weights and Measurements

Dimensions (Approx.)

12V DC Car Battery (Negative Ground)

330W RMS (20 Hz - 200 Hz, 1.0% THD + N, at 4 Ohms, 14.4V)
600W RMS (100 Hz, 1.0% THD + N, at 2 Ohms, 14.4V)

2-8 Ohms mono

Gold plated terminals

10 3/4" x 2 1/8" x 8" (272 x 51 x 202 mm)

1