5-014-859-11(2)
Television
Téléviseur
Reference Guide
Manuel de référence
Read this manual before using this product
US
FR
Sony Customer Support
U.S.A.:
http://www.sony.com/tvsupport
Canada:
http://www.sony.ca/support
United States Canada
1.800.222.SONY 1.877.899.SONY
Call the telephone number that appears on
your warranty card/policy.
Please do not return the product to the store.
Lisez ce manuel avant d’utiliser le produit
Service à la clientèle Sony
Canada :
http://www.sony.ca/support
États-Unis :
http://www.sony.com/tvsupport
Canada États-Unis
1.877.899.SONY 1.800.222.SONY
Appelez le numéro de téléphone qui
apparaît sur votre carte/police de garantie.
Ne retournez pas le produit au magasin.
XBR-85X900H / 85X90CH / 75X900H / 75X90CH / 65X900H / 65X90CH
XBR-55X900H / 55X90CH
About Manuals
https://rd1.sony.net/
help/tv/husltn2/
h_usltn/
This TV comes with the following manuals. Please retain the manuals for future reference.
Setup Guide
• TV installation and setup.
Reference Guide (this manual) / Safety Documentation
• Safety information, remote control, troubleshooting, wall-mount
installation, specification, etc.
Help Guide (On screen Manual)
• Settings, Android TV functions,
Internet connection,
• You can refer to the Help Guide with your
smartphone.
troubleshooting, etc.
• To open it, press the HELP
button on the remote control
and select Help Guide.
IMPORTANT - Read the End User Software License
Agreement before using your Sony product. Using your
product indicates your acceptance of the End User
Software License Agreement. The software license
agreement between you and Sony is available online at
Sony website (http://www.sony.net/
tv-software-licenses/) or on your product screen. Go to
[Settings] t [Device Preferences] t [About] t [Legal
information] t [End user license agreement].
Note
• Images and illustrations used in the Setup Guide and this
manual are for reference only and may differ from the
actual product.
The 85” class has a 84.6 inch (214.8 cm) viewable image
size, the 75” class has a 74.5 inch (189.3 cm) viewable
image size, the 65” class has a 64.5 inch (163.9 cm)
viewable image size and the 55” class has a 54.6 inch
(138.8 cm) viewable image size (measured diagonally).
Location of the identification label
Labels for the TV Model No. and Power Supply rating are
located on the rear of the TV.
IMPORTANT NOTICE
Owner’s Record
The model and serial numbers are located at the side
and/or rear of the TV. Record these numbers in the
spaces provided below. Refer to them whenever you call
upon your Sony dealer regarding this TV.
Model Name
Serial No.
CAUTION
To prevent electric shock and blade exposure, do not use
this AC plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted.
• Operate the TV only on 110 V – 240 V AC (U.S.A./Canada
120 V AC)
Note
This television includes a QAM demodulator which should
allow you to receive unscrambled digital cable television
programming via subscription service to a cable service
provider. Availability of digital cable television
programming in your area depends on the type of
programming and signal provided by your cable service
provider.
Safety Information
Supplier’s Declaration of Conformity
Trade Name: SONY
Model: XBR-85X900H / XBR-85X90CH / XBR-75X900H /
XBR-75X90CH / XBR-65X900H / XBR-65X90CH /
XBR-55X900H / XBR-55X90CH
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
US
2
FCC Related Information
US
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Pursuant to FCC regulations, you are cautioned that any
changes or modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Safety and Regulatory
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
To prevent radio interference to the licensed service, this
device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its
transmit antenna) that is installed outdoors is subject to
licensing.
5 GHz bands are restricted to indoor operations only.
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and
RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the
radiator at least 20 cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
This device and its antenna(s) must not be co-located or
operating with any other antenna or transmitter except
Grant condition.
High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and
5650-5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
Compatible Wall-Mount Bracket
Information
Use the following Sony Wall-Mount Bracket with your TV
model.
Sony TV Model No.
XBR-75X900H / XBR-75X90CH /
XBR-65X900H / XBR-65X90CH /
XBR-55X900H / XBR-55X90CH
Sony Wall-Mount
Bracket Model No.
SU-WL855
Use with other Wall-Mount Brackets* may cause instability
and could result in property damage or injury.
* For instructions on using the Wall-Mount bracket with
your TV please go to https://www.sony.com/am/support
for your TV model and download “Wall-Mount Bracket”.
To C ustomer s
Sufficient expertise is required for TV installations. Be sure
to subcontract the installation to a Sony dealer or licensed
contractor and pay adequate attention to safety during the
installation.
Before setting up your TV
Some TV models are packaged with a detached Table-Top
Stand so you can mount your TV to a wall right away. See
“Installing the TV to the Wall” if you want to mount the TV
to a wall. If you are not mounting the TV to a wall, you will
need to attach the Table-Top Stand (refer to the Setup
Guide).
Be sure to consider the following while setting up your TV:
• Disconnect all cables when carrying the TV.
• Carry the TV with the adequate number of people; larger
size TVs require two or more people (three or more
people for XBR-85X900H / 85X90CH).
• Correct hand placement while carrying the TV is very
important for safety and to avoid damage.
XBR-85X900H / 85X90CH
XBR-75X900H / 75X90CH / 65X900H / 65X90CH /
55X900H / 55X90CH
• Ensure your TV has adequate ventilation, refer to the
• For best picture quality, do not expose the screen to direct
• Avoid installing the TV in a room with reflective wall and
• Avoid moving the TV from a cold area to a warm area.
safety documentation.
illumination or sunlight.
floor materials.
Sudden room temperature changes may cause moisture
condensation. This may cause the TV to show poor
picture and/or poor color. Should this occur, allow
moisture to evaporate completely before powering the TV
on.
Securing the TV
Sony strongly recommends taking
measures to prevent the TV from
toppling over.
Unsecured TVs may topple and result in
property damage, serious bodily injury
or even death.
US
3
Preventing the TV from Toppling
Angle brace
(not supplied)
Stand
12
4
VS
M6 machine screw
(not supplied)
Screw (not
supplied)
Rope or chain
(not supplied)
Screw hole on the rear cover
(supplied)
1.5 N·m
{15 kgf·cm}
VS
10 mm – 12 mm
Screw (M6)
Rope or chain
• Secure the TV to a wall and/or Stand.
• Do not allow children to play or climb on furniture and TV
sets.
• Avoid placing or hanging items on the TV.
• Never install the TV on:
slippery, unstable and/or uneven surfaces.
furniture that can easily be used as steps, such as a
chest of drawers.
• Install the TV where it cannot be pulled, pushed, or
knocked over.
• Install the TV so that the TV’s Table-Top Stand does not
protrude out from the Stand (not supplied). If the
Table-Top Stand protrudes out from the Stand, it may
cause TV set to topple over, fall down, and cause personal
injury or damage to the TV.
• Route all AC power cords and connecting cables so that
they are not accessible to curious children.
Recommended Measures to Secure the
TV
Consider the following measures when securing your TV to
a Stand (not supplied).
1 Secure the Stand for the TV.
Make sure the Stand can adequately support the weight
of the TV. Use two angle braces (not supplied) to secure
the Stand. For each angle brace use the appropriate
hardware to:
• Attach one side of the angle brace to the wall stud.
• Attach the other side to the Stand.
2 Secure the TV to the Stand.
Use the optional hardware listed as follows (not
supplied):
• M6 machine screws (screwed into the TV’s rear cover).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
The length of the M6 machine screw differs depending
on the rope or chain diameter. Please refer to below
illustration.
US
4
Anchor the TV to the wall by using bolts, wall anchor and
US
M6 eye bolts (not supplied)
Rope or chain
(not supplied)
Wall-mount holes
(supplied)
Wall-anchor
(not supplied)
10 mm – 12 mm
VS
TV’s rear cov er
M6 eye
bolt
3
chain (or rope).
VS
Please refer to below illustration for M6 eye bolt length.
Note
• Your TV is shipped with screws attached to the rear of the
TV depending on the TV model. (They are fastened in the
screw holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV to a wall.
g the TV to the Stand without securing the TV and
• Securin
the Stand to the wall provides minimum protection
against the TV toppling over. For further protection, be
sure to follow the three measures recommended.
The BRAVIA® 4K TV Experience
Thank you for choosing Sony! Your new BRAVIA® TV
opens the door to the “4K TV Experience”. This
document will help you get the most out of your TV.
Please take a moment to register your TV at:
U.S.A.: http://productregistration.sony.com
Canada: http://www.sony.ca/registration
Four Steps to a 4K TV Experience
Set, Source, Sound, and Setup.
1 Set
Now that you have made the best selection in LED
backlit LCD TV technology, be sure to remove all of
the accessories from the packaging before setting up
your TV.
2 Source
To experience the stunning detail of your BRAVIA TV,
you need access to HD programming.
• Upgrade your signal or content source to
high-definition (4K) by contacting your HD service
provider.
• Bring the astonishing resolution of your Sony 4K
Ultra HD TV to life with Sony 4K Ultra HD Blu-ray
Player. (The availability depends on region)
• Receive over-the-air HD broadcasts with an
HD-quality antenna connected directly to the back
of your TV.
Visit http://www.antennaweb.org for more
information on antenna selection and setup.
• Discover the wealth of entertainment now available
on super-high resolution Blu-ray Disc™ player and
other Sony HD equipment.
3 Sound
Complete the high-definition experience with a
BRAVIA Sync™ surround sound system or A/V
receiver from Sony.
4 Setup
Install your TV and connect your sources. To help
assure the highest quality for your HD experience,
use Premium High Speed HDMI (High-Definition
Multimedia Interface) cables.
To learn more about 4K TV, visit:
U.S.A.: http://www.sony.com/HDTV
Canada: http://www.sony.ca/hdtv
This TV displays all video input signals in a resolution of
3,840 dots × 2,160 lines.
Note
• For details of supported formats, refer to the
“Specifications” in this manual.
• For supported PC formats, refer to the Help Guide.
US
5
Remote Control and TV
MIC
Ȫ
ȫ
Ȭ
ȭ
Ȯ
ȩ
The remote control shape, location,
availability and function of remote
control buttons may vary depending on
your region/country/TV model.
GUIDE: Display the digital program
guide of TV or Cable/Satellite box*1*3 .
DVR: Display the Rec list of DVR*
INPUT: Display and select the input
source, etc.
(Quick settings): Display Quick
Settings.
3
BACK
HOME
VOL +/– (Volume)
JUMP
4
MUTE*
CH +/– (Channel)
AUDIO: Select the sound of
multilingual source or dual sound
(depend on program source).
SUBTITLE/CC
HELP:
Display the Help menu.
///
Record the currently viewed
REC:
program on DVR*3 .
DISPLAY: Display information.
.
(The Google Assistant) /
(Microphone):
Assistant*
on how to control your TV press (the
Google Assistant) / (Microphone)
button and speak the phrase “voice
hints”.*
////: On screen menu
navigation and selection.
Use the Google
1*2
or voice search*2. For hints
1
TV: Display TV channel list or switch to
input.
(TV standby)
Number buttons
(dot)
Display a list of installed apps.
APPS:
Google Play / NETFLIX*
1
/ Color
buttons
US
6
Guidelines for IR Remote Control
• Point your remote control directly at the IR
sensor located on your TV.
• Make sure that no objects are blocking the
path between the remote control and the IR
sensor on your TV.
• Fluorescent lamps can interfere with your
remote control; try turning off the
fluorescent lamps.
• If you are having problems with the remote
control, reinsert or replace your batteries
and make sure that they are correctly
inserted.
(Power)
US
Remote Control sensor / Light
sensor / LED
*1 Only on limited region/country/TV model/
language.
*2 The Google Assistant or voice search requires
an Internet connection.
*3 [Cable/Satellite box setup] setting is required.
*4 Accessibility shortcut is available by pressing
and holding MUTE.
For more information,
refer to the Help Guide.
Installing the TV to the Wall
Using the optional Wall-Mount Bracket
(SU-WL855 only)* (not supplied)
To Customers:
For product protection and safety reasons,
Sony strongly recommends that installation
of your TV be performed by Sony dealers or
licensed contractors. Do not attempt to
install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the
installation, periodic maintenance and
examination of this product.
Wall-Mount Bracket Installation
Information
This TV’s instruction manual only provides
the steps to prepare the TV for Wall-Mount
installation before it is installed on the wall.
For instructions on Wall-Mount Bracket
installation, see the Installation Information
(Wall-Mount Bracket) on the Sony Customer
Support website for your TV model at the
following address.
https://www.sony.com/am/support
Preparing for Wall-Mount Installation
You can use the Wall-Mount Bracket
SU-WL855 (not supplied) to install the TV to
the wall. Make sure to attach the Table-Top
Stand before installing the TV to the wall by
referring to the Setup Guide.
• Prepare the TV for the Wall-Mount Bracket
before making cable connections.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV’s weight.
• Be sure to entrust the attachment of this
product to the wall to Sony dealers or
licensed contractors and pay adequate
attention to safety during the installation.
Sony is not liable for any damage or injury
caused by mishandling or improper
installation.
• The screws for Wall-Mount Bracket are
not supplied.
US
7
• The length of the screw for Wall-Mount
10 mm – 12 mm
VS
Screw (M6)
Wall -M ou nt Bra cket
10 mm – 12 mm
VS
Screw (M6)
Wall -M ou nt Bra cket
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
* Only on limited region/country/TV model.
Note
• Read the supplied Safety Booklet for additional
safety information.
Remove the screws from the rear of the
TV.
For product protection and safety
reasons, Sony strongly recommends that
installation of your TV on the wall be
performed by qualified professionals. Do
not attempt to install it yourself.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV’s weight.
• The screws for Wall-Mount Bracket are
not supplied.
• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
Using the optional Wall-Mount Bracket
(Except SU-WL855) (not supplied)
This TV’s instruction manual only provides
the steps to prepare the TV for Wall-Mount
installation before it is installed on the wall.
Your TV can be mounted to a wall using a
suitable Wall-Mount Bracket (not supplied).
If the Table-Top Stand is attached to the TV,
the TV may require detaching the Table-Top
Stand; see “Detaching the Table-Top Stand
from the TV”.
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
• Refer to the following table for
• Be sure to store the unused screws and
wall-mount hole pattern.
Model Name
XBR-85X900H /
85X90CH
XBR-75X900H /
75X90CH
XBR-65X900H /
65X90CH
XBR-55X900H /
55X90CH
Wall-mount hole
pattern
×
400 × 400 mm
300 × 300 mm
300 × 300 mm
300 × 300 mm
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
8
US
Note
VS
1.5 N·m
{15 kgf·cm}
Wall-Mount bracket
VS
Screw
US
• Read the supplied Safety Booklet for additional
safety information.
• For mor
e detailed information, visit Sony
Customer Support website.*
* Only on limited region/country/TV model.
1 Remove the screws from the rear of
the TV.
3 Attach the Wall-Mount Bracket (not
supplied) using the screws (not
supplied).
2 Attach the Wall-Mount Attachment
(supplied with the TV) to the rear of
the TV (to make it parallel with the
wall).
Note
• If using an electric screwdriver, set the torque at
approximately 1.5 N·m {15 kgf·cm}.
• Be sure to fasten the Wall-Mount Attachment
when attaching them to the TV.
Use only a flat head screwdriver to install the
Wall-Mount Attachment. Use of another tool
might result in over torqueing the Wall-Mount
Attachment and damaging the TV.
US
9
Loading...