Sony TA-MR2ES User Manual 2
TA-MR2ES
Distributed Audio Amplifier
Key Features
• Infrared Communication Port for quick and convenient wireless connectivity
• Advanced Integration Capabilities fit seamlessly into most integrated entertainment solutions
• Infrared Input Port: For use with IR keypads and repeater systems
• Unique IR Code Sets Allow up to 12 units to be operated independently
within
1 IR repeater system
• Attractive Silver Metallic Finish
Additional Features
General Features
• 2-channel Amplifier For use with
multi-room systems and A/V receivers
• Volume and Mute Control Using IR
Eliminates need for an external volume
control
• 12V Trigger Input For activation by
other devices
• 12V Trigger Output with Delay Powers
multiple amps without tripping circuit
ers with 1.5 second dela
eak
br
• Audio Signal Sensor Automatically activates
power when audio signal is detected
ower On and Off For use with
• Discr
ete P
macro-driven controllers
y
• Back Panel IR Code Generator Enables
om device
y fr
simple IR code learning dir
• Gain Controls Allows balancing of source
output with amplifier output, easily accessible
by installer behind front knockout panel
• 19-inch Rack Mountable For easy
installation, rack-mount hardware supplied
ts & Labor Limited W
ear Par
Y
• 5
backed by Sony quality and dependability
• 35W x 2: 8 ohms 20Hz-20kHz,THD 0.09%
• 40W x 2:
4 ohms 20Hz-20kHz,
ectl
arranty
THD 0.09%
Features
TA-MR2ES
Distributed Audio Amplifier
General
• Silver Finish Distributed Audio
Amplifier
• 35W x 2 (8 ohms 20Hz-20kHz,
THD 0.09%)
• 40W x 2 (4 ohms 20Hz-20kHz,
THD 0.09%)
• Audio Signal Sensor Activation
• 19-inch Rack Mountable
Specifications
General
• Power Consumption:
100W
• Power Requirements:
120V, 60Hz
• Frequency Response:
5-100Khz,
• Residual Noise:
or less
• Channel Separation:
60dB/45dB
+0.5/-2dB
<150_V
Audio Input
• Sensitivity: 150mV
• Impedance:
50kilo Ohms
• S/N: 94dB (A-weighted
filter, 150mV input level)
Audio Output
• V
without clipped
• Impedance: 1 kilo Ohms
• S/N:
filter, 2V output)
oltage:
102dB (A-w
IR Programming
• 12 Distinct IR Code Sets
• IR Programming from Back Panel
• Vol +/- and Mute On/Off (Toggle)
Supplied
Accessories
• Instruction Manual
• AC Power Cord x 1
• Rack Mount Ear x 2
• Rack Mount Scr
um 2V
Minim
eighted
Inputs and Outputs
• 12V Trigger In x 1
• 12V Trigger Out With 1.5 sec
Delay x 1
• IR Input Port with
Pass-Through x 1
• IR Output Port x 1
Weights and
Measures
• 14 lbs. 5 oz (6.5 kg)
• 17” x 2 5/8” x 13 7/8”
(430 x 67 x 350 mm)
ew x 8
UPC Code
• TBD
Sony Electr
1 Sony Drive
Park Ridge, NJ 07656
©2005 Sony Electronics Inc. All rights reserved. Features and specifications are subject to change without notice. Sony is a trademark of Sony. All other trademarks are trademarks of their respective owners.
onics Inc.
e inf
or mor
F
http://www.sony.com/dn
ormation:
Loading...