SONY ICD-SX800 User Manual

English

This Quick Start Guide describes only basic operations, such as how to record, play back, or erase messages. The operating instructions explaining all the features and functions are supplied with the IC recorder as PDF files in 20 languages stored on the supplied CD-ROM. You can copy the PDF files of the operating instructions to your computer. Insert the supplied CDROM into the CD-ROM drive of your computer, and just follow the instructions shown on the screen.

If the instructions are not shown on the screen, rightclick the CD-ROM on Windows Explorer to open, and double-click [SetupLauncher.exe].

The English edition of the operating instructions is supplied as a booklet as well.

For customers in Europe

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate

systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point

for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help

to conserve natural resources. For more detailed information about recycling of this product, please

contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Applicable accessories: USB connecting cable, cradle

Disposal of waste batteries (applicable in the European Union and other European countries with

collection systems)

This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.

By ensuring these batteries are disposed of correctly, you will

help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a permanent

connection with an incorporated battery, this battery should be replaced by qualified service staff only.

To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Notice for the customers: the following information is only applicable to equipment sold in the countries applying EU directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

The recorded music is limited to private use only. Use of the music beyond this limit requires permission of the copyright holders.

Sony is not responsible for incomplete recording/downloading or damaged data due to problems of the IC recorder or computer.

Depending on the types of the text and characters, the text shown on the IC recorder may not be displayed properly on device. This is due to:

The capacity of the connected IC recorder.

The IC recorder is not functioning normally.

Content information is written in the language or the character that is not supported by the IC recorder.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Notice for users

All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation.

IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice.

The software described herein may also be governed by the terms of a separate user license agreement.

This software is for Windows and cannot be used for Macintosh.

The supplied connecting cable is for the IC recorder ICD-SX700/SX800. You cannot connect other IC recorders.

Table of Contents
Checking the Contents of
the Package..........................................................	4
Getting Started
Step 1: Preparing a Power Source...........	5
Step 2: Setting the Clock..............................	6
Step 3: Setting the Language to Be
Used in the Display Window......................	7
Turning the IC Recorder On or Off.........	8
Recording
Recording Messages.......................................	9
Playback
Playing Back Messages................................	10
Utilizing Your Computer
Using the Supplied Digital Voice Editor
Software................................................................	11
Additional Information
Precautions.........................................................	14

Checking the

Contents of the

Package

IC Recorder (1)

NH-AAA (size AAA) rechargeable batteries (2)

Stereo headphones* (1) USB connecting cable (1) Wind Screen (1)

Application Software, Digital Voice Editor (CD-ROM)

Cradle* (1)

Stand (1) Carrying pouch (1) Microphone* (1) Battery case (1)

Operating Instructions

*The stereo headphones, the cradle and the microphone are supplied with some models in some regions only.

Getting Started

Step 1: Preparing a Power Source

Remove the film on the display window before you use the IC recorder.

Inserting the batteries

1 Slide and lift the battery compartment lid.

2 Insert two NH-AAA rechargeable batteries with correct polarity, and close the lid.

3 Charge the batteries by connecting the(USB) connector of the IC recorder to your computer.

Disconnecting the IC recorder from your computer

Follow the procedures below; otherwise, data may be damaged.

1 Make sure that the operation indicator is not flashing.

2 Disconnect the USB connecting cable connected to the IC recorder from the USB connector of the computer.

On the Windows screen, left-click “Safely Remove Hardware” on the taskbar, and click “Safely remove USB Mass Storage Device.”

On the Macintosh screen, drag the “IC RECORDER” on the desktop to “Trash” and drop it there.

For details on disconnecting the IC recorder, refer to the operating instructions supplied with your computer.

Step 2: Setting the

Clock

/MENU

You need to set the clock to use the alarm function or record the date and time.

Clock setting display appears when you insert batteries for the first time, or when you insert batteries after the IC recorder has been without batteries for a certain period of time, “SET DATE &

TIME” appears, and then the year section flashes in the display window.

Continued directly from “Step 1: Preparing a Power Source”

1 Press or to set the year, month, day, hour, and minute in sequence, then press .

“EXECUTING….” appears and the clock is set.

2 Press (stop) to return to the display of the stop mode.

Press or to select “MENU LANGUAGE,” then press .

Step 3: Setting the Language to Be Used in the Display Window

/MENU

You can select the language to be used for messages, menus, folder names, file names, etc. from 2 languages (European model)/7 languages (other models).

1 Press and hold /MENU to enter the menu mode.

The menu mode window will be displayed.

2 Press or to select “DETAIL MENU,” then press .

4 Press or to select the language that you want to use, then press .

You can select the following languages. European model :

ENGLISH, Pyccкий (Russian) Other models :

ENGLISH, Pyccкий (Russian), (Japanese), (Korean),

(Chinese), (Chinese), (Thai)

5 Press (stop) to exit the menu mode.

Turning the IC Recorder On or Off

When you are not using the IC recorder, you can prevent the batteries from getting weak quickly by turning the power off.

Turning the power off

Slide the HOLD switch in the direction of the arrow in the stop mode. “HOLD” with the key mark and the current time is displayed, then “POWER OFF” is displayed. The IC recorder turns off within a few seconds.

Turning the power on

Slide the HOLD switch in the opposite direction from that of the arrow. The IC recorder turnes on, and an accessing animation is displayed.

Tips

When you are not going to use the IC recorder for a long time, we recommend to turn off the IC recorder.

When about 10 minutes have passed after you have turned on the IC recorder and left it without doing anything, the display goes off automatically. (Press any button to show the display.)

Recording

Recording Messages

Built-in
directional
microphone
Built-in stereo
microphones
Operation
indicator

	,
	/MENU

1 Select a folder.

Press /MENU to display the folder selection window.

Press or to select the folder in which you want to record messages, then press .

2 Start recording.

Press (record/pause) in the stop mode.

The operation indicator lights in red. (When “LED” is set to “OFF” in the menu, the operation indicator does not light.)

You do not need to press and hold(record/pause) while recording. The new message will be automatically recorded after the last recorded message.

Speak into the built-in microphones.

3 Press (stop) to stop recording.

The IC recorder stops at the beginning of the current recording.

Playback

Playing Back

Messages

Operation

indicator

/MENU	VOL +, –

1 Select a folder.

Press /MENU.

Press or to select the folder, then press .

2 Press or to select the message you want to play.

3 Press to start playback.

The operation indicator lights in green. (When “LED” is set to “OFF” in the menu, the operation indicator does not light.)

4 Press VOL + or – to adjust the volume.

5 Press (stop) to stop playback.

Utilizing Your Computer

Using the Supplied

Digital Voice Editor

Software

System requirements

To use the supplied software, your computer must meet the operating system requirements and hardware environment described below.

Operating Systems:

Windows Vista® Ultimate

Windows Vista® Business Windows Vista® Home Premium Windows Vista® Home Basic

Windows® XP Media Center Edition 2005 Service Pack 2 or higher

Windows® XP Media Center Edition 2004 Service Pack 2 or higher

Windows® XP Media Center Edition Service Pack 2 or higher

Windows® XP Professional Service Pack 2 or higher

Windows® XP Home Edition Service Pack 2 or higher

Windows® 2000 Professional Service Pack 4 or higher

Pre-Installed

Hardware Environment:

Computer: IBM PC/AT or compatible

CPU : 266 MHz Pentium® II processor or higher (For Windows Vista®, 800MHz Pentium® III processor or higher)

RAM: 128MB or more (For Windows Vista®, 512MB or more)

Hard disk space: 150MB or more

CD-ROM drive (When creating an audio CD or data CD, a CD-R/RW drive is needed)

Port: USB port

Sound board: Sound cards compatible with any of the supported Microsoft® Windows® operating systems

Display: High color (16bit) or more and 800×480 dots or more

Internet access for Voice Mail function and CD database service

Note

The following systems are not supported:

Any 64bit operating system

Any operating systems other than the ones indicated above

Personally assembled PCs or operating systems

Upgraded operating systems

Multi-boot environment

Multi-monitor environment

Installing the software

Install the Digital Voice Editor software on your computer’s hard disk.

1 Make sure that the IC recorder is not connected, then turn on your computer and start up Windows.

2 Insert the supplied CD-ROM into the CD-ROM drive.

The [IC Recorder Software Setup] menu starts up automatically and the [Welcome to IC Recorder Software Setup] window appears. If the [Welcome to IC Recorder Software Setup] menu does not start up, open the [DVE] folder in the [Setup] folder on the CD-ROM, then double click [setup.exe].

3 Make sure that you accept the terms of the license agreement, select [I accept the terms of the license agreement], then click [Next].

The [Software Install] window appears.

4 Select [Digital Voice Editor], then click [Install].

Follow the instructions on the screen to make the settings required for installation.

If you have already installed a previous version of the Digital Voice Editor or any version of the “Memory Stick Voice Editor”

The dialog box used to uninstall a previous version of the Digital Voice Editor or any version of the “Memory Stick Voice Editor” will be displayed. Follow the instructions on the screen to uninstall the software. The message files are not removed.

Note

If any illegal data modification is attempted, or a file is used for other than private purposes, the file may become unplayable or the Digital Voice Editor may become inoperable.

When the dialog box used to select how to save files is displayed

When you save files recorded using the IC recorder onto the computer named above, you can select whether you wish to convert them into the MP3 format. Select the desired setting.

When the dialog box used to select an ICD P30/P50 is displayed

Select [Yes] to edit messages recorded using ICD P30/P50.

When the dialog box used to select the language to be used for the help is displayed

Click the language you want to use for the help.

5 When the [Ready to Install the Program] window appears, click [Install].

The installation starts.

6 When the [InstallShield Wizard Complete] window appears, select [Yes, I want to restart my computer now], then click [Finish].

The computer will be restarted.

When the computer has been restarted, installation is completed.

Referring to the help files

For details on each operation, refer to the help files.

Help

Additional Information

Precautions

On power

Operate the unit only on 2.4 V or 3.0 V DC. Use two NH-AAA rechargeable batteries or two LR03 (size AAA) alkaline batteries.

On safety

Do not operate the unit while driving, cycling or operating any motorized vehicle.

On handling

Do not leave the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.

Should any solid object or liquid fall into the unit, remove the batteries and have the unit checked by qualified personnel before operating it any further.

On noise

Noise may be heard when the unit is placed near an AC power source, a fluorescent lamp or a mobile phone during recording or playback.

Noise may be recorded when an object, such as your finger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth slightly moistened in water. Do not use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit, please consult your nearest Sony dealer.

Backup recommendations

To avoid potential risk of data loss caused by accidental operation or malfunction of the IC recorder, we recommend that you save a backup copy of your recorded messages on a tape recorder or to a computer, etc.

Français

Ce guide de démarrage rapide décrit uniquement les opérations de base, telles l’enregistrement, la lecture ou l’eff acement de messages.

Le mode d’emploi décrivant toutes les caractéristiques et fonctions est fourni avec l’enregistreur IC sous la forme d’un fi chier PDF en 20 langues et enregistré sur le CD-ROM fourni.

Vous pouvez copier les fi chiers PDF du mode d’emploi sur votre ordinateur. Insérez le CD-ROM fourni dans le lecteur de CD-ROM de votre ordinateur, puis suivez les instructions à l’écran.

Si les instructions ne s’affi chent pas à l’écran, faites un clic droit sur le CD-ROM sous Windows Explorer pour l’ouvrir, puis double-cliquez sur [SetupLauncher.exe].

L’édition anglaise du mode d’emploi est aussi fournie sous la forme d’un livret.

Modèle européen seulement

Traitement des appareils électriques et électroniques en fin de vie (Applicable dans les pays de l’Union Européenne et aux autres pays européens disposant de

de collecte sélective)

Ce symbole, apposé sur le produit ou sur son emballage, indique que ce produit ne doit pas être traité avec les déchets ménagers. Il doit être remis à un point de collecte approprié pour le recyclage des équipements électriques et électroniques. En s’assurant que ce produit est bien

mis au rebut de manière appropriée, vous aiderez à prévenir les conséquences négatives potentielles pour l’environnement et la santé humaine. Le recyclage des matériaux aidera à préserver les ressources naturelles. Pour toute information supplémentaire au sujet du recyclage de ce produit, vous pouvez contacter votre municipalité, votre déchetterie ou le magasin où vous

avez acheté le produit.

Ceci s’ fapplique aux accessoires suivants : Câble de raccordement USB, Station d’accueil

Elimination des piles et accumulateurs usagés (Applicable dans les pays de l’Union Européenne et aux autres pays européens disposant de systèmes

sélective)

Ce symbole, apposé sur les piles et accumulateurs ou sur les emballages, indique que les piles et accumulateurs fournis avec ce produit ne doivent pas être traités comme de simples déchets ménagers. En vous assurant que ces piles

et accumulateurs sont mis au rebut de façon appropriée, vous participez activement à la prévention des conséquences négatives que leur mauvais traitement pourrait provoquer sur

l’environnement et sur la santé humaine. Le recyclage

des matériaux contribue par ailleurs à la préservation FR des ressources naturelles.

Pour les produits qui pour des raisons de sécurité, de performance ou d’intégrité de données nécessitent une connexion permanente à une pile ou à un accumulateur, il conviendra de vous rapprocher d’un service technique qualifié pour effectuer son remplacement.

En rapportant votre appareil électrique en fin de vie à un point de collecte approprié vous vous assurez que la pile ou l’accumulateur incorporé sera traitée correctement.

Pour tous les autres cas de figure et afin d’enlever les piles ou accumulateurs en toute sécurité de votre appareil, reportez-vous au manuel d’utilisation. Rapporter les piles ou accumulateurs usagés au point de collecte approprié pour le recyclage.

Pour toute information complémentaire au sujet du recyclage de ce produit ou des piles et accumulateurs, vous pouvez contacter votre municipalité, votre déchetterie locale ou le point de vente où vous avez

acheté ce produit.

Remarque à l’intention des clients : les informations suivantes ne concernent que l’équipement vendu dans les pays appliquant les directives européennes

Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japon. Le représentant autorisé pour les questions de compatibilité électromagnétique (EMC) et la sécurité des produits est Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Allemagne. Pour toute question relative au SAV ou à la garantie, merci de bien vouloir vous référer aux coordonnées contenues

dans les documents relatifs au SAV ou la garantie.

La musique enregistrée est limitée à un usage privé exclusivement. L’utilisation de la musique au-delà de cette limite nécessite l’autorisation des détenteurs des droits d’auteur.

Sony ne peut être tenu responsable de tout enregistrement ou téléchargement incomplet ou de dommages causés aux données suite à des problèmes rencontrés par l’enregistreur IC ou l’ordinateur.

Selon le type de texte et de caractères, le texte affiché sur l’enregistreur IC peut ne pas apparaître correctement sur l’appareil. Ceci est dû :

aux caractéristiques techniques de l’enregistreur IC raccordé ;

à un défaut de fonctionnement de l’enregistreur IC ;

à des informations écrites dans une langue ou avec des caractères non pris en charge par l’enregistreur IC.

Vous êtes informé que toute modification qui n’est pas expressément approuvée dans ce mode d’emploi peut annuler votre autorisation à faire fonctionner cet appareil.

Notice destinée aux utilisateurs

Tous droits réservés. Le présent mode d’emploi et le logiciel qui y est décrit ne peuvent être reproduits, traduits ou réduits, en tout ou en partie, sous quelque forme compréhensible pour une machine que ce soit sans l’autorisation écrite préalable de Sony Corporation.

EN AUCUN CAS, SONY CORPORATION NE POURRA ETRE TENUE RESPONSABLE DE TOUT DOMMAGE DIRECT, INDIRECT, OU SPECIAL LIE A UN ACTE DELICTUEUX, UN CONTRAT OU AUTRE, QUI DECOULE OU EST A METTRE EN RELATION AVEC LE PRESENT MODE D’EMPLOI,

LE LOGICIEL OU TOUT AUTRE INFORMATION QU’IL CONTIENT, OU ENCORE DE SON UTILISATION.

Sony Corporation se réserve le droit de modifier ce manuel ou les informations qu’il contient à tout moment sans préavis.

Le logiciel décrit dans le présent mode d’emploi peut également être soumis aux conditions d’un contrat de licence utilisateur séparé.

Ce logiciel est destiné à Windows et ne peut pas être utilisé sur Macintosh.

Le câble de raccordement fourni est uniquement réservé à l’enregistreur IC ICD-SX700/SX800. Vous ne pouvez pas raccorder d’autres enregistreurs IC.

Table des matières
Vérification du contenu de
l’emballage..........................................................	17
Préparation
Etape 1 : Préparation d’une source
d’alimentation...................................................	18
Etape 2 : Réglage de l’horloge................	19
Etape 3 : Réglage de la langue à
utiliser dans la fenêtre d’affichage........	20
Mise sous/hors tension de
l’enregistreur IC.................................................	21
Enregistrement
Enregistrement de messages..................	22
Lecture
Lecture de messages....................................	23
Utilisation de l’ordinateur
Utilisation du logiciel Digital Voice
Editor fourni........................................................	24
Informations
complémentaires
Précautions.........................................................	27

Vérification du contenu de l’emballage

Enregistreur IC (1)

Piles rechargeables NH-AAA (AAA) (2) Casque stéréo* (1)

Câble de raccordement USB (1) Écran anti-vent (1)

Logiciel d’application, Digital Voice Editor (CD-ROM)

Station d’accueil* (1) Support (1)

Etui (1) Microphone* (1) Boîtier de la pile (1) Mode d’emploi

*Dans certaines régions et avec certains modèles, le casque stéréo, la station d’accueil et le microphone ne sont pas fournis.

+ 39 hidden pages