Sony CDX-4160RDS User Manual

FM/MW/LW Compact Disc Player

3-859-316-12 (1)

Operating Instructions

Manual de instrucciones

Manual de instruções

Bruksanvisning

For installation and connections, see the supplied installation/connections manual.

Para obtener información sobre la instalación y las conexiónes, consulte el manual de instalación/conexiones suministrado.

Para a instalação e as ligações, consulte o manual de instalação/ligações fornecido.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

CDX-4160RDS

 1996 by Sony Corporation

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Welcome !

Thank you for purchasing the Sony Compact Disc Player. This unit lets you enjoy a variety of features by using an optional rotary remote.

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Table of Contents

Getting Started

Resetting the unit ................................................ 4

Detaching the front panel .................................. 4

Setting the clock .................................................. 5

CD Player

Listening to a CD ................................................ 5

Playing a CD in various modes ........................ 6

Radio

Memorising stations automatically

— Best Tuning Memory (BTM) ................... 6

Memorising only the desired stations .............. 7

Receiving the memorised stations .................... 7

RDS

Overview of the RDS function .......................... 8

Displaying the station name .............................. 8

Re-tuning the same programme automatically

— Alternative Frequencies (AF) .................. 8

Listening to traffic announcements .................. 9

Presetting RDS stations with the AF

and TA data .................................................. 10

Locating a station by programme type .......... 10

Setting the clock automatically ....................... 11

Other Functions

Adjusting the sound characteristics ............... 11

Muting the sound.............................................. 11

Changing the sound and beep tone ............... 12

Additional Information

Precautions ......................................................... 12

Maintenance ....................................................... 13

Dismounting the unit ....................................... 14

Attaching the label to the rotary remote ........ 14

Location of controls .......................................... 15

Specifications ..................................................... 16

Troubleshooting guide ..................................... 17

Index ................................................................... 19

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Getting Started

Resetting the unit

Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the reset button with a pointed object, such as a ballpoint pen.

Reset button

Notes

• Pressing the reset button will erase all the memorized programme and memory functions.

• When you connect the power supply cord to the unit or reset the unit, wait for about 10 seconds before you insert a disc. Do not insert a disc within these 10 seconds; otherwise, the unit will not be reset, and you will have to press the reset button again.

Detaching the front panel

You can detach the front panel of this unit to prevent the unit from being stolen.

Attaching the front panel

Align part A of the front panel to part B of the unit as illustrated, and push until it clicks.

Notes

• Be sure not to attach the front panel upside down.

• Do not press the front panel hard against the unit when attaching it. Press it lightly against the unit.

• Do not press hard or put excessive pressure on the display window of the front panel.

• Do not expose the front panel to direct sunlight, heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight where there may be a considerable rise in temperature.

Caution alarm

If you turn the ignition key switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds (only when the POWER SELECT switch is set to the A position).

1 Press (OFF).

2 Press (RELEASE) to open up the front

panel. Then slide the front panel a little to the left, and pull it off towards you.

(OFF)

(RELEASE)

Notes

• Be sure not to drop the panel when detaching it from the unit.

• If you press (RELEASE) to detach the panel while the unit is still on, the unit will turn off automatically to prevent the speakers from being damaged.

• When you carry the front panel with you, put it in the

supplied front panel case.

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

SEEK

AMS

Setting the clock

The clock has a 24-hour digital indication.

Example: Set the clock to 10:08

1 Press (OFF) or (DSPL) during operation.

2 Press (DSPL) for more than two seconds.



100

The hour digit flashes.

1 Set the hour digits.

to go forward

to go back

CD Player

Listening to a CD

Simply insert the CD.

Playback starts automatically.

Labelled side up



1000

2 Press (SEL) momentarily.



1000

The minute digits flash.

3 Set the minute digits.

to go forward

to go back



1008

3 Press (DSPL) momentarily.



1008

The clock is activated.

Note

If the POWER SELECT switch on the bottom of the unit is set to the B position, the clock cannot be set unless the power is turned on. Set the clock after you have turned on the radio, or started CD playback.

If a CD is already inserted, press (SOURCE) repeatedly until “CD” appears.

Elapsed playing time

Note

To play back an 8 cm CD, use the optional Sony compact disc single adapter (CSA-8).

To Press

Stop playback 6 or (OFF)

Eject the CD 6

TRACK

5 215

Track number

Changing the displayed items

Each time you press (DSPL), the item changes as follows:

Track number ˜ Time

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of (SEEK/AMS) momentarily.

To locate succeeding tracks

Getting Started/CD Player

To locate preceding tracks

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Locating a specific point in a track

— Manual Search

During playback, press and hold either side of (SEEK/AMS) for two seconds. Release the button when you have found the desired point.

To search forward

SEEK

AMS

To search backward

Note

If “ you have reached the beginning or the end of the disc and you cannot go any further.

” or “ ” appears in the display,

Playing a CD in various modes

Searching for the desired track

— Intro Scan

Press (1) during playback.

“INTRO” appears in the display.

The first 10 seconds of all the tracks are played.

When you find the desired track, press again. The unit returns to the normal playback mode.

Radio

Memorising stations automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest signals and memorises them in the order of their frequencies. You can store up to 6 stations on each band (FM1, FM2, FM3, MW and LW).

Caution

When tuning in a station while driving, use Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source changes as follows:

CD ˜ TUNER

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band changes as follows:

” FM1 ” FM2 ” FM3 ” MW ” LW

Playing tracks repeatedly

— Repeat Play

Press (2) during playback.

“REP” appears in the display.

When the currently played track is over, it will be played again from the beginning.

To cancel this mode, press again.

Playing tracks in random order

— Shuffle Play

Press (3) during playback.

“SHUF” appears in the display.

All tracks on the CD are played in random order.

To cancel this mode, press again.

3 Press (SENS/BTM) for two seconds.

The unit stores stations in the order of their frequencies on the number buttons.

Notes

• The unit does not store stations with weak signals. If only a few stations are received, some number buttons remain empty.

• When a number is indicated in the display, the unit starts storing stations from the one currently displayed.

• If a CD is not in the unit, only the tuner band appears even if you press (SOURCE).

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Memorising only the desired stations

You can store up to 6 stations on each band (18 for FM1, FM2 and FM3, 6 for each MW and LW) in the order of your choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK/AMS) to tune

in the station that you want to store on the number button.

4 Press the desired number button ((1) to

(6)) for two seconds until “MEM” appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

Receiving the memorised stations

1 Select the desired band (page 6).

2 Press the number button ((1) to (6))

momentarily where the desired station is stored.

If you cannot tune in a preset station

Press either side of (SEEK/AMS) momentarily to search for the station (automatic tuning).

Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received.

Note

If the automatic tuning stops too frequently, press (SENS/BTM) momentarily until “LCL” appears in the display (local seek mode). Only the stations with relatively strong signals will be tuned in.

Tip

If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) for two seconds until the desired frequency appears (manual tuning).

CD Player/Radio

If FM stereo reception is poor

— Monaural Mode

Press (SENS/BTM) momentarily until “MONO” appears.

The sound improves, but becomes monaural (“ST” disappears).

To go back to the normal mode, press again until “MONO” disappears.

Changing the displayed items

Each time you press (DSPL), the items alternate between the frequency and time.

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

RDS

Overview of the RDS function

The Radio Data System (RDS) is a broadcasting service that allows FM stations to send additional digital information along with the regular radio programme signal. Your car stereo offers you a variety of services. Here are just a few: re-tuning the same programme automatically, listening to traffic announcements and locating a station by programme type.

Re-tuning the same programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function automatically selects and re-tunes the station with the strongest signal in a network. By using this function, you can continuously listen to the same programme during a longdistance drive without having to re-tune the station manually.

Frequencies change automatically.

98.5MHz

96.0MHz

Notes

• Depending on the country or region, not all of the RDS functions are available.

• RDS may not work properly if the signal strength is weak or if the station you are tuned in to is not transmitting RDS data.

Displaying the station name

The name of the station currently received lights up in the display.

Select an FM station (page 6).

When you tune in an FM station that transmits RDS data, the station name appears in the display.

FM1

BBC 1 FM

Note

The “*” indication means that an RDS station is being received.

Changing the displayed items

Each time you press (DSPL), the item changes as follows:

” Frequency ” Clock ” Station Name

Note

“NO NAME” appears if the station received does not transmit RDS data.

Station

102.5MHz

1 Select an FM station (page 6).

2 Press (AF/TA) repeatedly until “AF”

appears.

The unit starts searching for an alternative station with a stronger signal in the same network.

Note

When there is no alternative station in the area and you do not need to search for an alternative station, turn the AF function off by pressing (AF/TA) repeatedly until “AF TA” disappears.

Changing the displayed items

Each time you press (AF/TA), the item changes as follows:

” AF ” TA ” AF TA*

Blank “

* Select this to turn on both the AF and TA functions.

Notes

• “NO AF” and the station name flash alternately, if the unit cannot find an alternative station in the network.

• If the station name starts flashing after selecting a station with the AF function on, this indicates that no alternative frequency is available. Press (SEEK/AMS) while the station name is flashing (within eight seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data (“PI SEEK” appears and no sound is heard). If the unit cannot find another frequency, “NO PI” appears, and the unit returns to the originally selected frequency.

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Listening to a regional programme

The “REG” (regional on) function of this unit lets you stay tuned to a regional programme without being switched to another regional station. (Note that you must turn the AF function on.) The unit is factory preset to “REG,” but if you want to turn off the function, do the following.

Press (AF/TA) for more than two seconds until “REG” disappears.

Note that turning the “REG” function off might cause the unit to switch to another regional station within the same network.

Note

This function does not work in the United Kingdom and in some other areas.

Local link function (United Kingdom only)

The Local Link function lets you select other local stations in the area, even though they are not stored on your number buttons.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

Tips

• If you press (AF/TA) while tuning in the traffic

announcement, the unit can play a CD.

• If the traffic announcement starts while you are listening to another programme source, the unit automatically switches to the announcement and goes back to the original source when the announcement is over.

Notes

• “NO TP” flashes for five seconds if the received station does not broadcast traffic announcements. Then, the unit starts searching for a station that broadcasts traffic announcements.

• When “EON” appears with “TP” in the display, the current station makes use of traffic announcements broadcast by other stations in the same network.

To cancel the current traffic announcement

Press (AF/TA) momentarily.

To cancel all traffic announcements, turn off the function by pressing (AF/TA) until “AF” and “TA” disappear.

Presetting the volume of traffic announcements

You can preset the volume level of the traffic announcements beforehand so you won’t miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level.

1 Select the desired volume level.

2 Press (3) while pressing (SEL).

“TA VOL” appears and the setting is stored.

RDS

Listening to traffic announcements

The Traffic Announcement (TA) and Traffic Programme (TP) data let you automatically tune in an FM station that is broadcasting traffic announcements even though you are listening to other programme sources.

Press (AF/TA) repeatedly until “TA” or “AF TA” appears.

The unit starts searching for traffic information stations. “TP” appears in the display when the unit finds a station broadcasting traffic announcements. When the traffic announcement starts, “TA” flashes. “TA” stops flashing when the traffic announcement is over.

Receiving emergency announcements

If an emergency announcement comes in while you are listening to the radio, the programme will be automatically switched to the announcement. If you are listening to a source other than the radio, the emergency announcements will be heard if you set AF or TA to on. The unit will then automatically switch to these announcements no matter what you are listening to at the time.

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Presetting RDS stations with the AF and TA data

When you preset RDS stations, the unit stores each station’s data as well as its frequency, so you don’t have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations.

Presetting the same setting for all preset stations

1 Select an FM band (page 6).

2 Press (AF/TA) repeatedly to select either

“AF,” “TA” or “AF TA” (for both AF and TA functions).

Note that turning the “AF TA” function off stores RDS stations as well as non-RDS stations.

3 Press (SENS/BTM) for two seconds.

Presetting different settings for each preset station

1 Select an FM band, and tune in the

desired station (page 6).

2 Press (AF/TA) repeatedly to select either

“AF,” “TA” or “AF TA” (for both AF and TA functions).

3 Press the desired number button for two

seconds until “MEM” appears.

Repeat from step 1 for presetting other stations.

Tip

If you want to change the preset AF and/or TA setting after you tune in the preset station, you can do so by turning on/off the AF or TA function.

Locating a station by programme type

You can locate the station you want by selecting one of the programme types shown below.

Note

If the countries or regions where EON data is not transmitted, you can use this function only for the stations you have tuned in once before.

Programme types Display

News NEWS Current Affairs AFFAIRS Information INFO Sports SPORT Education EDUCATE Drama DRAMA Culture CULTURE Science SCIENCE Varied VARIED Popular Music POP M Rock Music ROCK M Middle of the Road Music M.O.R. M Light Classical LIGHT M Classical CLASSICS Other Music Types OTHER M Weather WEATHER Finance FINANCE Children’s programmes CHILDREN Social Affairs SOCIAL A Religion RELIGION Phone In PHONE IN Travel TRAVEL Leisure LEISURE Jazz Music JAZZ Country Music COUNTRY National Music NATION M Oldies Music OLDIES Folk Music FOLK M Documentary DOCUMENT Not specified NONE

Note

You cannot use this function in some countries where no PTY (Programme Type selection) data is available.

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

1 Press (PTY) during FM reception until

“PTY” appears.



INFO

The current programme type name appears if the station is transmitting PTY data. “- - - - -” appears if the received station is not an RDS station, or if the RDS data has not been received.

2 Press (PTY) repeatedly until the desired

programme type appears.

The programme types appear in the order shown in the above table. Note that you cannot select “NONE” (Not specified) for searching.



3 Press either side of (SEEK/AMS).

The unit starts searching for a station broadcasting the selected programme type. When the unit finds the programme, the programme type appears again for five seconds. “NO” and the programme type appear alternately for five seconds if the unit cannot find the programme type. It then returns to the previous station.

Other Functions

Adjusting the sound characteristics

You can adjust the bass, treble, balance and fader. Each source can store the bass and treble level settings independently.

1 Select the item you want to adjust by

pressing (SEL) repeatedly.

VOL (volume) n BAS (bass) n TRE (treble) n BAL (balance) n FAD (fader)

2 Adjust the selected item by pressing (+)

or (–).

Adjust within three seconds after selecting the item. (After three seconds, the buttons work as volume control buttons.)

Muting the sound

RDS/Other Functions

Setting the clock automatically

The CT (Clock Time) data from the RDS transmission sets the clock automatically.

During FM reception, press (2) while pressing (SEL).

“CT” is displayed, and the clock is set.

FM1

100

To cancel the CT function

Repeat the above procedure.

Notes

• The CT function may not work even though an RDS station is being received.

• There might be a difference between the time set by the CT function and the actual time.

Press (MUTE).

“MUTE” flashes.

To restore the previous volume level, press (MUTE) again.

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Changing the sound and beep tone

Boosting bass sound — D-bass

You can enjoy clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even if the vocal sound is the same volume. You can emphasize and adjust the bass sound easily with the D-BASS dial. This effect is similar to the one you get when you use an optional subwoofer system. Moreover, the Digital D-bass* function creates even sharper and more powerful bass sound than Analog D-bass.

* Digital D-bass is available during CD playback.

Digital D-BASS

D-BASS 3

Level

0dB

Adjusting the bass curve

D-BASS 2

D-BASS 1

Frequency (Hz) Frequency (Hz)

Turn the D-BASS dial to adjust the bass level (1, 2 or 3).

“D-BASS” appears in the display. During CD playback, “DIGITAL D-BASS” appears in the display.

Analog D-BASS

Level

0dB

D-BASS 3

D-BASS 2

D-BASS 1

Additional Information

Precautions

• If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it.

• If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse.

• If no sound comes from the speakers of a two-speaker system, set the fader control to the centre position.

•If your car is equipped with a power aerial, note that it will extend automatically while the unit is operating.

If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer.

Notes on handling CDs

A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle the disc as follows. Handle the disc by its edge. To keep the disc clean, do not touch the surface.

To cancel, turn the dial to the OFF position.

Muting the beep tone

Press (6) while pressing (SEL).

To obtain the beep tone again, press these buttons again.

Note

When connecting an optional power amplifier to the LINE OUT, the beep tone is disabled.

Do not stick paper or tape on the labelled surface.

Do not expose the discs to direct sunlight or heat sources such as hot air-ducts, or leave them in a car parked in direct sunlight where there can be a considerable rise in the temperature inside the car.

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Before playing, clean the discs with an optional cleaning cloth. Wipe each disc from the centre out. Do not use solvents such as benzine, thinner, commercially available cleaners or antistatic spray intended for analog discs.

Notes on moisture condensation

On a rainy day or in a very damp area, moisture may condense on the lenses inside the CD player. Should this occur, the unit will not operate properly. In this case, remove the disc and wait for about an hour until the moisture evaporates.

When you play 8 cm CDs

Use the optional Sony compact disc single adapter (CSA-8) to protect the CD player from being damaged.

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one that matches the amperage described on the fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.

Fuse (10 A)

Warning

Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.

Cleaning the connectors

The unit may not function properly if the connectors between the unit and the front panel are not clean. To prevent this, open the front panel by pressing (RELEASE), then detach it and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged.

Other Functions/Additional Information

Main unit

Back of the front panel

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Dismounting the unit

Release key (supplied)

Attaching the label to the rotary remote

You can control this unit with the optional rotary remote (RM-X2S). Several labels are supplied with the rotary remote. Attach the label that matches the functions of this unit and the mounting position of the rotary remote. After you mount the rotary remote, attach the label in the illustration below.

MODE

DSPL

SEL

MODE

DSPL

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Location of controls

SOURCE

SEEK

AMS

RELEASE

MODE

MUTE

SEL

SENS/BTM

DSPL

INTRO REPEAT SHUF

OFF

Refer to the pages for details.

1 SEEK/AMS (seek/Automatic Music

Sensor/manual search) button 5, 6, 7, 8, 10

2 SOURCE (source select) button 5, 6, 7 3 MODE (band select) button 6, 7 4 SEL (control mode select) button

5, 9, 11, 12

5 SENS/BTM (sensitivity adjust/Best

tuning memory) button 6, 7, 9

6 DSPL (display mode change/time set)

button 5, 7, 8

7 Display window 8 PTY (programme type) button 11 9 6 (eject) button 5 !º AF/TA (alternative frequency/traffic

announcement) button 8, 9, 10

!¡ RELEASE (front panel release) button 4,

PTY

AF/TA

OFF

D-BASS

21 3456

!™ (+) (–) (volume/bass/treble/balance/

fader control) buttons 5, 11

!£ MUTE button 11 !¢ Reset button (located on the front side

of the unit hidden by the front panel) 4

!∞ OFF button 4, 5 !§ POWER SELECT switch (located on the

bottom of the unit)

See “POWER SELECT Switch” in the Installation/Connections manual.

!¶ During radio reception:

Number buttons 6, 7, 9, 10

During CD playback:

(1) INTRO button 6 (2) REPEAT button 6 (3) SHUF button 6

!• D-BASS dial 12

Additional Information

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Specifications

CD player section

System Compact disc digital audio

system Signal-to-noise ratio 90 dB Frequency response 10 – 20,000 Hz Wow and flutter Below measurable limit

Tuner section

Tuning range 87.5 – 108 MHz Aerial terminal External aerial connector Intermediate frequency 10.7 MHz Usable sensitivity 8 dBf Selectivity 75 dB at 400 kHz Signal-to-noise ratio 60 dB (stereo),

65 dB (mono) Harmonic distortion at 1 kHz

0.8 % (stereo),

0.5 % (mono) Separation 35 dB at 1 kHz Frequency response 30 – 15,000 Hz Capture ratio 2 dB

MW/LW

Tuning range MW: 531 – 1,602 kHz

LW: 153 – 281 kHz Aerial terminal External aerial connector Intermediate frequency 10.71 MHz/450 kHz Sensitivity MW: 30 µV

LW: 35 µV

Power amplifier section

Outputs Speaker outputs

(sure seal connectors) Speaker impedance 4 – 8 ohms Maximum power output 35 W × 4 (at 4 ohms)

General

Outputs Power aerial relay control

lead Power amplifier control lead

Tone controls Bass ±8 dB at 100 Hz

Treble ±8 dB at 10 kHz

Power requirements 12 V DC car battery

(negative ground)

Dimensions Approx. 188 × 58 × 175 mm

(w/h/d)

Mounting dimensions Approx. 178 × 50 × 160 mm

(w/h/d) Mass Approx. 1.5 kg Supplied accessories Parts for installation and

connections (1 set)

Front panel case (1) Optional accessories Rotary remote RM-X2S

RCA pin cord

RC-63 (1 m), RC-64 (2 m),

RC-65 (5 m)

Cleaning cloth XP-CD1

Compact disc single

adapter CSA-8

Design and specifications are subject to change without notice.

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Troubleshooting guide

The following checklist will help you remedy the problems that you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures.

General

Problem

No sound.

The contents of the memory have been erased.

Indications do not appear in the display.

No beep tone.

Cause/Solution

•Adjust the volume with (+).

•Set the fader control to the centre position for two-speaker systems.

• The power cord or battery has been disconnected.

• The reset button has been pressed. n Store the settings again into the memory.

Remove the front panel and clean the connectors. See “Cleaning the connectors” (page 13) for details.

• An optional power amplifier is connected to the LINE OUT.

• The beep tone is muted (page 11).

CD playback

Problem

CD cannot be loaded.

Play does not begin.

CD is automatically ejected.

The operation buttons do not function.

The sound skips due to vibration.

Radio reception

Problem

Preset tuning is not possible.

Automatic tuning is not possible.

The “ST” indication flashes.

Cause/Solution

• Another CD is already loaded.

• The CD was forcibly inserted upside down.

Dusty disc.

The ambient temperature is more than 50°C.

Press the reset button.

• The unit is installed at an angle of more than 20°.

• The unit is not installed in a sturdy part of the car.

Cause/Solution

• Store the correct frequency.

• The broadcast signal is too weak.

The broadcast signal is too weak. n Use manual tuning.

•Tune in the frequency correctly.

•The broadcast signal is too weak. n Set to the MONO mode (page 7).

continue to next page n

Additional Information

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

RDS

Problem

A SEEK starts after a few seconds of listening.

No traffic announcements.

PTY displays “NONE.”

Cause/Solution

The station is non-TP or has a weaken signal. n Press (AF/TA) until “AF TA” disappears.

• Activate “TA.”

• The station does not broadcast any traffic announcements despite being a TP station. n Tune in another station.

The station does not specify the programme type.

Error displays

The following indications will flash for about five seconds, and an alarm sound will be heard.

Display

ERROR

RESET

If the above-mentioned solutions do not help improve the situation, consult your nearest Sony dealer.

Cause

A CD is dirty or inserted upside down.

The CD player cannot be operated because of some problem.

Solution

Clean or insert the CD correctly.

Press the reset button.

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

Index

Alternative Frequencies (AF) 8, 10 Automatic Music Sensor (AMS) 5 Automatic tuning 7

Balance 11 Bass 11 Beep tone 12 Best Tuning Memory (BTM) 6

Caution alarm 4 CD playback 5 Clock 5 Clock Time function (CT) 11

D, E

D-BASS 12 Display 5, 7, 8

F, G, H

Fader 11 Front panel 4 Fuse 13

I, J, K

Intro Scan 6

M, N, O, P, Q

Manual search 6 Manual tuning 7 Memorising a station 6 Monaural mode 7 Mute 11

Radio 6 Radio Data System (RDS) 8 Repeat Play 6 Reset 4 Rotary remote 14

Shuffle Play 6

T, U

Traffic Announcement (TA) 9, 10 Traffic Programme (TP) 9 Treble 11

V, W, X, Y, Z

Volume 11

Additional Information

Local seek 7 Local link function 8 Locating

a specific point 6 a specific track 5

Actual total number: Sony CDX-4160RDS (E,S,P,Sw) 3-859-316-12(1)

¡Bienvenido!

Enhorabuena por la adquisición del reproductor de discos compactos Sony. Esta unidad le permitirá disfrutar de una serie de funciones mediante el uso de un mando a distancia rotativo opcional.

Actual total number: Sony CDX-4160RDS (E,S,P,W) 3-859-316-12(1)

Indice

Procedimientos iniciales

Restauración de la unidad ................................. 4

Extracción del panel frontal............................... 4

Ajuste del reloj ..................................................... 5

Reproductor de discos compactos

Reproducción de un disco compacto ............... 5

Reproducción de un disco compacto en

diversos modos .............................................. 6

Radio

Memorización automática de emisoras

— Memorización de la mejor sintonía

(BTM) ............................................................... 7

Memorización de las emisoras deseadas......... 7

Recepción de emisoras memorizadas .............. 8

RDS

Descripción general de la función RDS ........... 8

Visualización del nombre de la emisora .......... 8

Resintonización automática del mismo

programa

— Frecuencias alternativas (AF) .................. 9

Recepción de anuncios de tráfico ................... 10

Programación de emisoras RDS con los datos

AF y TA ......................................................... 10

Localización de una emisora mediante el

tipo de programa ......................................... 11

Ajuste automático del reloj .............................. 11

Información complementaria

Precauciones ...................................................... 13

Mantenimiento .................................................. 14

Desmontaje de la unidad ................................. 14

Adhesión de la etiqueta al mando a distancia

rotativo .......................................................... 14

Ubicación de los controles ............................... 15

Especificaciones ................................................. 16

Guía de solución de problemas ...................... 17

Indice alfabético ................................................ 19

Otras funciones

Ajuste de las características de sonido ........... 12

Cancelación del sonido .................................... 12

Cambio de los ajustes de sonido y

tono del pitido .............................................. 12

Actual total number: Sony CDX-4160RDS (E,S,P,W) 3-859-316-12(1)

Procedimientos iniciales

Restauración de la unidad

Antes de utilizar la unidad por primera vez o después de sustituir la batería del automóvil, es necesario restaurar dicha unidad. Pulse el botón de restauración con un objeto puntiagudo, por ejemplo, un bolígrafo.

Fijación del panel frontal

Alinee la parte A del panel con la parte B de la unidad como muestra la ilustración y, a continuación, ejerza presión hasta oír un chasquido.

Botón de restauración

Notas

• Al pulsar el botón de restauración se borrarán todos los programas memorizados y las funciones de memoria.

• Cuando conecte el cable de alimentación o restaure la unidad, espere unos 10 segundos antes de insertar un

disco. No inserte ningún disco antes de que transcurran los 10 segundos, ya que de lo contrario la unidad no se restaurará y deberá volver a pulsar el botón de restauración.

Extracción del panel frontal

Es posible extraer el panel frontal de esta unidad con el fin de evitar su robo.

1 Pulse (OFF).

2 Pulse (RELEASE) para abrir el panel

frontal. A continuación, deslícelo ligeramente hacia la izquierda y extráigalo tirando hacia fuera.

(OFF)

Notas

• Asegúrese de no fijar el panel frontal al revés.

• No ejerza excesiva presión sobre el panel frontal al fijarlo a la unidad. Presiónelo ligeramente.

• No presione con fuerza o en exceso el visor del panel frontal.

• No exponga el panel frontal a la luz solar directa, a fuentes térmicas, como conductos de aire caliente, ni lo deje en un lugar húmedo. No lo deje nunca sobre el salpicadero de un automóvil aparcado al sol, ya que podría producirse un considerable aumento de temperatura.

Alarma de precaución

Si gira el interruptor de la llave de contacto a la posición OFF sin haber extraído el panel frontal, la alarma de precaución emitirá pitidos durante unos segundos (sólo si el interruptor POWER SELECT está ajustado en la posición A).

(RELEASE)

Notas

• Procure no dejar caer el panel al extraerlo de la unidad.

• Si pulsa (RELEASE) para extraer el panel mientras la

unidad se encuentra encendida, ésta se desactivará

automáticamente para evitar que se dañen los altavoces.

• Para transportar el panel frontal, guárdelo en el estuche suministrado.

Actual total number: Sony CDX-4160RDS (E,S,P,W) 3-859-316-12(1)

Ajuste del reloj

SEEK

AMS

El reloj dispone de una indicación digital de 24 horas.

Ejemplo: Para ajustar el reloj a las 10:08

1 Pulse (OFF) o (DSPL) durante el

funcionamiento.

Reproductor de discos compactos

Reproducción de un disco compacto

2 Pulse(DSPL) durante más de dos

segundos.



100

El dígito de la hora parpadea.

1 Ajuste los dígitos de la hora.

para avanzar

para retroceder



1000

2 Pulse (SEL) durante un instante.



1000

El dígito de los minutos parpadea.

3 Ajuste los dígitos de los minutos.

para avanzar

para retroceder



1008

3 Pulse (DSPL) durante un instante.



1008

El reloj se activa.

Nota

Si el interruptor POWER SELECT situado en la parte inferior de la unidad se encuentra en la posición B, no es posible poner en hora el reloj, a menos que esté activada la alimentación. Ponga en hora el reloj después de encender la radio o de iniciar la reproducción de un CD.

Basta con insertar el CD.

La reproducción se iniciará de forma automática.

Con el lado de la etiqueta hacia arriba

Si ya hay un CD insertado, pulse (SOURCE) varias veces hasta que aparezca “CD.”

Tiempo de reproducción transcurrido

Nota

Si desea reproducir un CD de 8 cm, utilice el adaptador sencillo de discos compactos opcional Sony (CSA-8).

Para Pulse

Detener la reproducción 6 u (OFF)

Expulsar el CD 6

TRACK

5 215

Número de tema

Cambio de los elementos mostrados

Cada vez que pulse (DSPL), el elemento cambiará de la siguiente forma:

Número de tema ˜ Hara

Localización de un tema específico

— Sensor de música automático (AMS)

Durante la reproducción, pulse durante un instante cualquier lado de (SEEK/AMS).

Para localizar temas posteriores

Procedimientos iniciales/Reproductor de discos compactos

Para localizar temas anteriores

Actual total number: Sony CDX-4160RDS (E,S,P,W) 3-859-316-12(1)

+ 51 hidden pages