SONY BE-3D Service Manual
SELF-DIAGNOSTIC FUNCTION
MICROFILM
SERVICE MANUAL BE-3D CHASSIS
MODEL
COMMANDER DEST CHASSIS NO.
KV-29FX11A
KV-29FX11B
KV-29FX11D
KV-29FX11E
RM-886 Italian SCC-K05S-A
RM-886 French SCC-K01U-A
RM-886 AEP SCC-K07U-A
RM-886 Spanish SCC-K06U-A
MODEL
COMMANDER DEST CHASSIS NO.
KV-29FX11K
KV-29FX11R
KV-29FX11U
RM-886 OIRT SCC-K20K-A
RM-886 OIRT SCC-K20L-A
RM-886 UK SCC-K04Q-A
TRINITRON
/
MENU
PROGR
RM-883
®
COLOR TV
®
1
KV-29FX11
CIRCUIT ADJUSTMENTS
4-1.ELECTRICAL ADJUSTMENTS
Service adjustments to this model can be performed
using the supplied Remote Commander RM-886.
HOW TO ENTER INTO SERVICE MODE
1. Turn on the main power switch and enter into the stand-by
mode.
2. Press the following sequence of buttons on the Remote
Commander.
+
(ON SCREEN
DISPLAY)
• ‘TT--’ will appear in the upper right corner of the
screen.
Other status information will also be displayed.
3. Press ‘MENU’ on the remote commander to obtain the
following menu on the screen.
5
(DIGIT 5) (VOLUME +) (TV)
+
SECTION 4
PICTURE ADJUSTMENT
AFC mode 1
REF position 3
SCP BGR 1
SCP BGF 1
Trap fo 7
Sub contrast Adj
Sub colour Adj
Sub brightness Adj
Green drive Adj
Blue drive A dj
Green cutoff Adj
Blue cutoff Adj
Gamma 0
Pre / overshoot 0
Y delay 5
D Pic ON/OFF
D Colour ON/OFF
DC Transfer ON/OFF
TEST MENU
> Picture Adjustment
Geometry
Wide
IC status
MSP
Current TV status
4. Move to the corresponding adjustment using the button on the
remote commander.
5. Press the + button to enter the selected adjustment.
6. Turn off the power to quit the service mode when adjustments
have been completed.
GEOMETRY ADJUSTMENT - 4:3
V size Adj
V position Adj
S Correction Adj
V Linearity Adj
H size Adj
H position Adj
Pin Amp Adj
Pin Phase Adj
AFC Bow Adj
AFC Angle Adj
EHT V 1
EHT H 0
Lo Corn Pin Adj
Up Corn Pin Adj
WIDE ADJUSTME NT - 4:3
V Aspect 47
V Scroll 25
Upper V Lin 0
Lower V Lin 0
Left Blanking 1
Right Blanking 11
28
Loading...