SONY ALPHA 5000 User Manual [nl]

4-487-947-43(1)

ILCE-5000

E-mount

Interchangeable Lens Digital Camera/Instruction Manual GB

Appareil photo à objectif interchangeable/Mode d’emploi FR

Digitalkamera mit Wechselobjektiv/Gebrauchsanleitung DE

Cámara Digital de Lentes Intercambiables/Manual de instrucciones ES

Fotocamera digitale con obiettivo intercambiabile/Istruzioni per l’uso IT

Câmara Digital de Objetivas intercambiáveis/Manual de instruções PT

Digitale camera met verwisselbare lens/Gebruiksaanwijzing NL

Цифровой фотоаппарат со сменным объективом/Инструкция по эксплуатации

Цифровий фотоапарат зі змінним об'єктивом/Посібник з експлуатації

Digitalkamera med utbytbart objektiv/Handledning SE

Digitaalinen kamera vaihdettavalla objektiivilla/Käyttöopas FI

Digitalkamera med utskiftbart objektiv/Bruksanvisning NO

Digitalkamera med udskifteligt objektiv/Betjeningsvejledning DK

English

E-mount

Learning more about the camera (“Help Guide”)

“Help Guide” is an on-line manual. Refer to it for in-depth instructions on the many functions of the camera. 1 Access the Sony support page.

http://www.sony.net/SonyInfo/Support/

2 Select your country or region. 3 Search for the model name of your camera on the support

page.

• Check the model name on the bottom of your camera.

Viewing the Guide

This camera is equipped with a built-in instruction guide.

(In-Camera Guide)

In-Camera Guide

The camera displays explanations for MENU items and the setting values.

1 Press the MENU button. 2 Select the desired item, then press the (In-Camera Guide) button.

Shooting Tip

The camera displays shooting tips for the shooting mode selected.

1 Press the (In-Camera Guide) button in shooting mode. 2 Select the desired shooting tip, then press z on the control wheel.

The shooting tip is displayed.

• You can scroll the screen using v/V and change shooting tips using b/B.

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product.

Model No. ILCE-5000 Serial No. _____________________________ Model No. AC-UB10C/AC-UB10D Serial No. _____________________________

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.

CAUTION

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery terminals.

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car parked in the sun.

• Do not incinerate or dispose of in fire.

• Do not handle damaged or leaking lithium ion batteries.

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

[ AC Adaptor

Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using the apparatus.

The power cord (mains lead), if supplied, is designed specifically for use with this camera only, and should not be used with other electrical equipment.

For Customers in the U.S.A. and Canada

[ RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.call2recycle.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack and lens (If lens supplied)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-3 B/NMB-3 B

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

For Customers in the U.S.A.

If you have any questions about this product, you may call:

Sony Customer Information Center 1-800-222-SONY (7669)

The number below is for the FCC related matters only.

[ Regulatory Information

Declaration of Conformity

Trade Name: SONY Model No.: ILCE-5000 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo,

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

San Diego, CA 92127 U.S.A.

For Customers in Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

For Customers in Europe

[ Notice for the customers in the countries applying EU Directives

Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan For EU product compliance: Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany

Hereby, Sony Corporation, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL: http://www.compliance.sony.de/

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

This product has been tested and found compliant with the limits set out in the EMC regulation for using connection cables shorter than 3 meters (9.8 feet).

The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.

[ Disposal of waste batteries and electrical and electronic

equipment (applicable in the European Union and other European countries with separate collection systems)

This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.

will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product or battery.

By ensuring these products and batteries are disposed of correctly, you

For Customers in Singapore

For customers who purchased their camera from a store in Japan that caters to tourists

[ Note

Some certification marks for standards supported by the camera can be confirmed on the screen of the camera. Select MENU t (Setup) 5 t [Certification Logo]. If display is not possible due to problems such as camera failure, contact your Sony dealer or local authorized Sony service facility.

Table of contents

Preparing the camera Step 1 P. 9

– Checking the supplied items – Identifying parts – Inserting the battery pack – Charging the battery pack – Attaching/removing the lens – Inserting a memory card (sold separately) – Setting the clock

Basic operation Step 2 P. 21

– Shooting still images/movies

Playback function Step 3 P. 22

– Viewing images

Recording function Step 4 P. 23

– Introduction of other functions

Importing images to the computer P. 24

– Features of PlayMemories Home

Adding functions to the camera P. 25

– Adding functions to the camera

Others P. 26

– Number of still images and recordable time of movies – Notes on using the camera – Specifications

This manual covers several models supplied with different lenses. The model name varies depending on the supplied lens. The available model varies depending on the countries/regions.

Model name Lens

ILCE-5000L E16 – 50 mm

ILCE-5000Y E55 – 210 mm and E16 – 50 mm

Checking the supplied items

First check the model name of your camera (page 8). The accessories supplied differ depending on the model. The number in parentheses indicates the quantity.

Supplied with all models

• Camera (1)

• Power cord (mains lead) (1)* (not supplied in the U.S.A. and Canada)

* Multiple power cords may be

supplied with your camera. Use the appropriate one that matches your country/region.

• Rechargeable battery pack NP-FW50 (1)

• Micro USB cable (1)

• AC adaptor AC-UB10C/UB10D (1)

• Shoulder strap (1)

• Instruction Manual (this manual) (1)

• Wi-Fi Connection/One-touch (NFC) Guide This guide explains the functions that require a Wi-Fi connection.

ILCE-5000L

• E16 – 50 mm zoom lens (1) (attached to the camera)/Front lens cap (1) (attached to the lens)

ILCE-5000Y

• E16 – 50 mm zoom lens (1) (attached to the camera)/Front lens cap (1) (attached to the lens)

• E55 – 210 mm zoom lens (1)/Front lens cap (1)/Rear lens cap (1)/Lens hood (1)

Identifying parts

When the lens is removed

A Shutter button B ON/OFF (Power) switch C Hook for shoulder strap D (N Mark)

• Touch the mark when you connect the camera to a smartphone equipped with the NFC function.

• NFC (Near Field Communication) is an international standard of the short-range wireless communication technology.

E For shooting: W/T (zoom) lever

For viewing: (Index)/

(Playback zoom) lever

F AF illuminator/Self-timer lamp G Image sensor position mark H Flash I Microphone

J Lens K Lens release button L Mount M Image sensor N Lens contacts

Do not cover this part during movie recording.

Do not touch this part directly.

A (Flash pop-up) button B LCD screen

• You can adjust the LCD screen to

an easily viewable angle and shoot from any position.

C Access lamp D Memory card/terminal cover E Wi-Fi sensor (built-in) F MOVIE (Movie) button G MENU button H Control wheel I (In-Camera Guide) /

(Delete) button

J (Playback) button K Multi/Micro USB Terminal

• Supports Micro USB compatible

device.

L Charge lamp M Memory card slot N HDMI micro jack

A Battery cover B Battery eject lever C Battery insertion slot D Connection plate cover

• Use this when using an ACPW20 AC Adaptor (sold separately). Insert the connection plate into the battery compartment, and then pass the cord through the connection plate cover as shown below.

• Make sure that the cord is not pinched when you close the cover.

E Speaker F Tripod socket hole

• Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.

Lens

See page 32 on the specifications of the lenses.

E PZ 16 – 50 mm F3.5 – 5.6 OSS (supplied with ILCE-5000L/ILCE-5000Y)

A Zooming/Focusing ring B Zooming lever C Mounting index D Lens contacts

Do not touch this part directly.

E55 – 210 mm F4.5 – 6.3 OSS (supplied with ILCE-5000Y)

A Focusing ring B Zooming ring C Focal-length scale D Focal-length index E Lens contacts F Mounting index

Do not touch this part directly.

Inserting the battery pack

Battery eject lever

Open the cover.

Insert the battery pack.

• While pressing the battery eject lever, insert the battery pack as illustrated. Make sure that the battery eject lever locks after insertion.

• Closing the cover with the battery inserted incorrectly may damage the camera.

Charging the battery pack

For customers in the USA and Canada

Power cord (Mains lead)

For customers in countries/ regions other than the USA and Canada

Connect the camera to the AC Adaptor (supplied),

using the micro USB cable (supplied).

Connect the AC Adaptor to the wall outlet (wall socket).

The charge lamp lights orange, and charging starts.

• Turn off the camera while charging the battery.

• You can charge the battery pack even when it is partially charged.

• When the charge lamp flashes and charging is not finished, remove and re-insert the battery pack.

Charge lamp Lit: Charging Off: Charging finished Flashing:

Charging error or charging paused temporarily because the camera is not within the proper temperature range

Notes

• If the charge lamp on the camera flashes when the AC Adaptor is connected to the wall outlet (wall socket), this indicates that charging is temporarily stopped because the temperature is outside the recommended range. When the temperature gets back within the appropriate range, the charging resumes. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50ºF to 86ºF).

• The battery pack may not be effectively charged if the terminal section of the

battery is dirty. In this case, wipe any dust off lightly using a soft cloth or a cotton swab to clean the terminal section of the battery.

• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If

malfunctions occur while using the AC Adaptor, disconnect the plug from the wall outlet (wall socket) immediately to disconnect from the power source.

• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall

socket).

• Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied)

and AC Adaptor (supplied).

• Power is not supplied during shooting/playback if the camera is connected to a

wall outlet with the supplied AC adaptor. To supply power to the camera during shooting/playback, use the AC-PW20 AC adaptor (sold separately).

Charging time (Full charge)

The charging time is approximately 310 minutes using the AC Adaptor (supplied).

Notes

• The above charging time applies when charging a fully depleted battery pack at a

temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances.

Charging by connecting to a computer

The battery pack can be charged by connecting the camera to a computer using a micro USB cable.

To a USB

Notes

• Note the following points when charging via

a computer: – If the camera is connected to a laptop computer that is not connected to a power

source, the laptop battery level decreases. Do not charge for an extended period of time.

– Do not turn on/off or restart the computer, or wake the computer to resume from

sleep mode when a USB connection has been established between the computer and the camera. That may cause the camera to malfunction. Before turning on/ off, or restarting the computer or waking the computer from sleep mode, disconnect the camera and the computer.

– No guarantees are made for charging using a custom-built computer or a

modified computer.

jack

Battery life and number of images that can be recorded and played back

Battery life Number of images

Shooting (still images) Approx. 210 min. Approx. 420 images Typical movie shooting Approx. 95 min. — Continuous movie shooting Approx. 150 min. — Viewing (still images) Approx. 470 min. Approx. 9400 images

Notes

• The above number of images applies when the battery pack is fully charged. The number of images may decrease depending on the conditions of use.

• The number of images that can be recorded is for shooting under the following conditions: – Using a Sony Memory Stick PRO Duo™ (Mark2) media (sold separately). – When an E PZ 16 – 50 mm F3.5 – 5.6 OSS lens is attached. – The battery pack is used at an ambient temperature of 25°C (77°F).

• The number for “Shooting (still images)” is based on the CIPA standard, and is for shooting under the following conditions: (CIPA: Camera & Imaging Products Association) – DISP is set to [Display All Info.]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash is used once every two times. – The power is turned on and off once every ten times.

• The number of minutes for movie shooting is based on the CIPA standard, and is for shooting under the following conditions: – [ Record Setting]: 60i 17M(FH)/50i 17M(FH). – Typical movie shooting: Battery life based on repeatedly starting/stopping

shooting, zooming, turning on/off, etc.

– Continuous movie shooting: Battery life based on non-stop shooting until the

limit (29 minutes) has been reached, and then continued by pressing the MOVIE button again. Other functions, such as zooming, are not operated.

Attaching/removing the lens

Set the power switch of the camera to OFF before you attach or remove the lens.

If the cap or the packaging lid is attached, remove it from

the camera or the lens.

• Quickly change the lens somewhere away from dusty locations to keep dust or debris from getting inside the camera.

Mount the lens by aligning the white index marks on the

lens and the camera.

• Hold the camera facing down to prevent dust from entering into the camera.

While pushing the lens lightly toward the camera, turn the

lens clockwise until it clicks into the locked position.

• Be sure to put the lens on straight.

Notes

• When attaching a lens, do not press the lens release button.

• Do not use excessive force when attaching a lens.

• The Mount Adaptor (sold separately) is required to use an A-mount lens (sold separately). For details, refer to the operating manual supplied with the Mount Adaptor.

• When using a lens equipped with a tripod socket, attach the socket on the lens side to the tripod to maintain balance.

Removing the lens

Lens release button

Press the lens release button all the way in and turn the

lens counterclockwise until it stops.

Notes

• If dust or debris gets inside the camera while you are changing the lens and adheres to the surface of the image sensor (the part that converts the light source to a digital signal), it may appear as dark spots on the image, depending on the shooting environment. The camera vibrates slightly when it is turned off, due to the anti-dust function, to prevent dust from adhering to the image sensor. However, attach or remove the lens quickly somewhere away from dusty locations.

• If foreign material attaches to the image sensor, dust it off using a blower.

• Do not leave the camera with the lens removed.

• When you want to use body caps or rear lens caps, please purchase ALC-B1EM (Body cap) or ALC-R1EM (Rear lens cap) (sold separately).

• When you use a lens with a power zoom, set the power switch of the camera to OFF and confirm that the lens is completely retracted before switching lenses. If the lens has not retracted, do not press the lens in by force.

• When attaching the camera to a tripod, be sure not to touch the zooming/focusing ring by mistake.

Inserting a memory card (sold separately)

Ensure that the notched corner is faced correctly.

Open the cover.

Insert the memory card (sold separately).

• With the notched corner facing as illustrated, insert the memory card until it clicks into place.

Close the cover.

Memory cards that can be used

Memory card For still images For movies

Memory Stick XC-HG Duo™

Memory Stick PRO Duo™ (Mark2 only) Memory Stick PRO-HG Duo™ SD memory card (Class 4 or faster)

SDHC memory card (Class 4 or faster) SDXC memory card (Class 4 or faster)

• In this manual, the products in the table are collectively referred to as follows:

A: Memory Stick PRO Duo media B: SD card

To remove the memory card/battery pack

Memory card: Push the memory card in once to eject the memory card. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.

Notes

• Never remove the memory card/battery pack when the access lamp (page 11) is lit. This may cause damage to data in the memory card.

Setting the clock

ON/OFF (Power)

Control wheel

Select items: v/V/b/B// Set:

Set the ON/OFF (Power) switch to ON.

The Date & Time setting is displayed when you turn on the camera for the first time.

• It may take some time for the power to turn on and allow operation.

Check that [Enter] is selected on the screen, then press

z on the control wheel.

Select a desired geographic location by following the

on-screen instructions, then press z.

Set [Daylight Savings], [Date/Time] and [Date Format],

then press z.

• When setting [Date/Time], midnight is 12:00 AM, and noon is 12:00 PM.

Check that [Enter] is selected, then press z.

Shooting still images/movies

Shutter button

W/T (zoom) lever

W: zoom out T: zoom in

MOVIE

Shooting still images

Press the shutter button halfway down to focus.

When the image is in focus, a beep sounds and the z or indicator lights.

Press the shutter button fully down to shoot an image.

Shooting movies

Press the MOVIE (Movie) button to start recording.

• Use the W/T (zoom) lever to change the zoom ratio.

Press the MOVIE button again to stop recording.

Notes

• Do not pull up the flash manually. This may cause a malfunction.

• When using the zoom function while shooting a movie, the sound of the camera operating will be recorded. The sound of the MOVIE button operating may also be recorded when movie recording is finished.

• Continuous movie shooting is possible for approximately 29 minutes at one time with the camera’s default settings and when the ambient temperature is approximately 25°C (77°F). When movie recording is finished, you can restart recording by pressing the MOVIE button again. Recording may stop to protect the camera depending on the ambient temperature.

Viewing images

W: zoom out T: zoom in

Control wheel

Select images:

(Playback)

(Delete)

Press the (Playback) button.

Selecting next/previous image

Select an image by pressing B (next)/b (previous) on the control wheel or by turning the control wheel. Press z in the center of the control wheel to view movies.

Deleting an image

1 Press the (Delete) button. 2 Select [Delete] with v on the control wheel, then press z.

B (next)/b (previous) or turn the control wheel

Set: z

Returning to shooting images

Press the shutter button halfway down.

Introduction of other functions

Other functions can be operated using the control wheel, MENU button, etc.

Control wheel

DISP (Display Contents): Allows you to change the screen display. ISO (ISO): Allows you to set the sensitivity based on the brightness.

(Exposure Comp.): Allows you to compensate the exposure and brightness

for the entire image.

(Photo Creativity): Allows you to operate the camera intuitively and

shoot creative images easily.

(Drive Mode): Allows you to switch between shooting methods, such as single shooting, continuous shooting or bracket shooting. z (Shoot Mode): Allows you to change the shooting mode.

Features of PlayMemories Home

The software PlayMemories Home allows you to import still images and movies to your computer and use them. PlayMemories Home is required for importing AVCHD movies to your computer.

Playing back importe d images

Importing images from your camera

For Windows, the following functions are also available:

Sharing images on PlayMemories Online™

Viewing images on a calendar

Creating movie discs

Uploading images to network services

• You can download Image Data Converter (RAW image editing software) or Remote Camera Control, etc. by performing the following procedure: Connect the camera to your computer t launch PlayMemories Home t click [Notifications].

Notes

• An Internet connection is required to install PlayMemories Home.

• An Internet connection is required to use PlayMemories Online or other network services. PlayMemories Online or other network services may not be available in some countries or regions.

• Use the following URL for Mac applications: http://www.sony.co.jp/imsoft/Mac/

• If the software PMB (Picture Motion Browser), supplied with models released before 2011, has already been installed on your computer, PlayMemories Home will overwrite it during the installation. Use PlayMemories Home, the successor software of PMB.

Installing PlayMemories Home on a computer

Using the Internet browser on your computer, go to the

following URL, and then click [Install] t [Run].

www.sony.net/pm/

Follow the instructions on the screen to complete the

installation.

• For details on PlayMemories Home, refer to the following PlayMemories Home support page (English only): http://www.sony.co.jp/pmh-se/

• When installation is complete, PlayMemories Home starts.

Connect the camera to your computer using the micro

USB cable (supplied).

• New functions may be installed in PlayMemories Home. Connect the camera to your computer even if PlayMemories Home is already installed on your computer.

Notes

• Do not disconnect the micro USB cable (supplied) from the camera while the operating screen or the accessing screen is displayed. Doing so may damage the data.

• To disconnect the camera from the computer, click on the tasktray, then click

(disconnect icon). For Windows Vista, click on the tasktray.

Adding functions to the camera

You can add the desired functions to your camera by connecting to the application download website (PlayMemories Camera Apps™) via the Internet. http://www.sony.net/pmca

• After installing an application, you can call up the application by touching an NFC-enabled Android smartphone to the N mark on the camera, using the [One-touch(NFC)] function.

Number of still images and recordable time of movies

The number of still images and recordable time may vary depending on the shooting conditions and the memory card.

Still images

[ Image Size]: L: 20M When [ Aspect Ratio] is set to [3:2]*

Quality

Standard 385 images Fine 240 images RAW & JPEG 65 images RAW 89 images

* When the [ Aspect Ratio] is set to other than [3:2], you can record more

pictures than shown above. (Except when [ Quality] is set to [RAW].)

Movies

The table below shows the approximate maximum recording times. These are the total times for all movie files. Continuous shooting is possible for approximately 29 minutes (a product specification limit). The maximum continuous recording time of an MP4 (12M) format movie is about 20 minutes (limited by the 2 GB file size restriction).

(h (hour), m (minute))

Record Setting

60i 24M(FX)/50i 24M(FX) 10 m 60i 17M(FH)/50i 17M(FH) 10 m 24p 24M(FX)/25p 24M(FX) 10 m 24p 17M(FH)/25p 17M(FH) 10 m 1440×1080 12M 20 m VGA 3M 1 h 10 m

Capacity

2 GB

• The recordable time of movies varies because the camera is equipped with VBR (Variable Bit-Rate), which automatically adjusts the image quality depending on the shooting scene. When you record a fast-moving subject, the image is clearer but the recordable time is shorter because more memory is required for recording. The recordable time also varies depending on the shooting conditions, the subject or the image quality/size settings.

Notes on using the camera

Functions built into this camera

• This manual describes 1080 60i-compatible devices and 1080 50i-compatible devices. To check whether your camera is a 1080 60i-compatible device or 1080 50icompatible device, check for the following marks on the bottom of the camera. 1080 60i-compatible device: 60i 1080 50i-compatible device: 50i

On use and care

Avoid rough handling, disassembling, modifying, physical shock, or impact such as hammering, dropping, or stepping on the product. Be particularly careful of the lens.

Notes on recording/playback

• Before you start recording, make a trial recording to make sure that the camera is working correctly.

• This camera is neither dust-proof, nor splash-proof, nor water-proof.

• Do not aim the camera at the sun or other bright light. It may cause a malfunction of the camera.

• Do not look at the sun or a strong light through a removed lens. This may cause irrecoverable damage to your eyes. Or it may cause a malfunction of the lens.

• If moisture condensation occurs, remove it before using the camera.

• Do not shake or strike the camera. It may cause a malfunction and you may not be able to record images. Furthermore, the recording media may become unusable or image data may be damaged.

Do not use/store the camera in the following places

• In an extremely hot, cold or humid place In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction.

• Under direct sunlight or near a heater The camera body may become discolored or deformed, and this may cause a malfunction.

• In a location subject to shaking or vibration

• Near a location that generates strong radio waves, emits radiation or is strongly magnetic In such locations, the camera may not properly record or play back images.

• In sandy or dusty places Be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired.

About the grip

The grip is applied with a special coating. The grip may be discolored if it is rubbed with a dark colored cloth, leather, etc.

On storing

Be sure to attach the front lens cap when not using the camera.

Notes on the screen and lens

• The screen is manufactured using extremely high-precision technology, and over

99.99% of the pixels are operational for effective use. However, some tiny black and/or bright dots (white, red, blue or green) may appear on the screen. These dots are a normal result of the manufacturing process, and do not affect the recording.

• There are magnets attached to the back of the screen and in the area around the flash. Do not put objects that are affected by magnetic fields, such as a floppy disk or a credit card to the screen or the camera body.

• When the lens is operating, be careful not to let your finger be caught by the lens.

On using the lenses and accessories

It is recommended that you use Sony lenses/accessories designed to suit the characteristics of this camera. Using the products of other manufacturers may cause the camera not to operate to its capability, or result in accidents and malfunctions of the camera.

Notes on the flash

• Do not carry the camera by the flash unit, or use excessive force on it.

• If water, dust or sand get into the open flash unit, it may cause a malfunction.

• Be sure to keep your fingers out of the way when you press the flash down.

On camera’s temperature

Your camera and battery may get hot due to continuous use, but it is not a malfunction.

On the overheat protection

Depending on the camera and battery temperature, you may be unable to record movies or the power may turn off automatically to protect the camera. A message will be displayed on the screen before the power turns off or you can no longer record movies. In this case, leave the power off and wait until the camera and battery temperature goes down. If you turn on the power without letting the camera and battery cool down enough, the power may turn off again or you may be unable to record movies.

On charging the battery

If you charge a battery that has not been used for a long time, you may be unable to

charge it to the proper capacity. This is due to the battery characteristics. Charge the battery again.

Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.

No guarantee in the case of damaged content or recording failures

Sony cannot provide a guarantee in the case of failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc.

Cleaning the camera surface

Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. To prevent damage to the finish or casing: – Do not expose the camera to chemical products such as thinner, benzine, alcohol,

disposable cloths, insect repellent, sunscreen or insecticide.

Maintaining the screen

• Hand cream or moisturizer left on the screen may dissolve its coating. If you get

any on the screen, wipe it off immediately.

• Wiping forcefully with tissue paper or other materials can damage the coating.

• If fingerprints or debris are stuck to the screen, we recommend that you gently

remove any debris and then wipe the screen clean with a soft cloth.

Notes on wireless LAN

We assume no responsibility whatsoever for any damage caused by unauthorized access to, or unauthorized use of, destinations loaded on the camera, resulting from loss or theft.

Notes on disposal/transfer of the camera

To protect personal data, perform the following when disposing of or transferring the camera.

• Reset all camera settings by performing [Setting Reset].

Specifications

Camera

[System]

Camera type: Interchangeable lens

digital camera

Lens: E-mount lens

[Image sensor]

Image sensor: APS-C format (23.2 mm

× 15.4 mm) CMOS image sensor

Total pixel number of image sensor:

Approx. 20 400 000 pixels

Effective pixel number of camera:

Approx. 20 100 000 pixels

[Auto focus system]

System: Contrast detection system Sensitivity range: EV0 to EV20 (at ISO

100 equivalent, with F2.8 lens)

[Exposure control]

Metering method: 1 200-segment

metering by the image sensor

Metering range: EV0 to EV20 (at

ISO 100 equivalent, with F2.8 lens)

ISO sensitivity (Recommended

exposure index): Still images: AUTO, ISO 100 – ISO 16 000 Movies: AUTO, ISO 100 – ISO 6 400 equivalent

Exposure compensation: ±3.0 EV

(1/3 EV step)

[Shutter]

Type: Electronically-controlled,

vertical-traverse, focal-plane type

Speed range:

Still images: 1/4 000 second to 30 seconds, BULB Movies: 1/4 000 second to 1/4 second (1/3 EV step), 1080 60i-compatible device up to 1/60 second in AUTO mode (up to 1/30 second in [Auto Slow Shut.] mode) 1080 50i-compatible device up to 1/50 second in AUTO mode (up to 1/25 second in [Auto Slow Shut.] mode)

Flash sync speed: 1/160 second

[Recording media]

Memory Stick PRO Duo media,

SD card

[LCD screen]

LCD panel: Wide, 7.5 cm (3.0 type)

TFT drive

Total number of dots: 460 800 dots

[Input/output terminals]

Multi/Micro USB Terminal*:

USB communication

HDMI: HDMI type D micro jack

* Supports Micro USB compatible

device.

[Power]

Battery type: Rechargeable battery

pack NP-FW50

+ 437 hidden pages