Smooth Fitness DMT X2 User Manual

USER’S MANUAL

SMOOTH AGILE DMT X2

USER WEIGHT LIMITATION: 350lbs(160kgs).

SERIAL NUMBER (found on frame):

2 SMOOTH AGILE DMT X2

equipment. Make sure to inventory all of the parts that are included in the boxes.

For future service or related questions:

Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth
Fitness AGILE DMT X2.

Name: ______________________________ Phone Number: ___________________ Receipt: ______________________

Open the boxes:

You are now ready to open the boxes of your new
Check the Parts List for a full count of the number of parts included for this product to be assembled properly. If you are missing
any parts or have any assembly questions call your local dealer or contact us directly at 888-800-1167.

Gather your tools:

Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require to assemble
the unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.

Clear your work area:

Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free from
anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable amount of free
area around the unit for unobstructed operation.

Invite a friend:

Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person when
assembling this product.

User Weight Limitation:

Please note that there is a weight limitation for this product. If you weigh more than 350lbs. it is not recommended that you use this
product. Serious injury may occur if the user’s weight exceeds the limit shown here. This product is not intended to support users
whose weight exceeds this limit.

PREASSEMBLY

www.smoothfitness.com

3

Power Requirements:

IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE
PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT
THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.

This AGILE Trainer can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges
and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility
of AGILE Trainer damage, always use a surge protector (not included) with your AGILE Trainer.

Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a
UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an
electrical rating 110VAC, 15 amps.

This AGILE Trainer must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for
electric current, should the AGILE Trainer malfunction. This AGILE Trainer is equipped with an electrical cord that has an
equipment-grounding conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge
protector into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated in the drawing
below.
GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI Circuit Breakers
may cause this equipment to function improperly.

POWER REQUIREMENTS

4 SMOOTH AGILE DMT X2

A2A

3

SUPPLIED COMPONENTS

This list identifies the major components you will use to assemble this product.

No. Description Qty.

A1 Handlebar Assembly – Left 1

A2 Console Support Tube Assembly 1

A3 Handlebar Assembly – Right 1

A4 Main Frame Assembly 1

A5 Incline Frame Assembly 1

A6 Computer Assembly 1

701 Action Handlebar Lower Cover 4

702 Pedal Arm Front Pivot Cover 2

703 Incline Frame Cover 1

704 Undercarriage Cover - Left 1

705 Undercarriage Cover - Right 1

706 Nylon Bushing 2

707 Action Handlebar Cap 2

708 Incline Frame Holder – Front 2

709 Console Support Tube Cover – Rear 1

710 Console Support Tube Cover – Front 1

E Screwdriver 1

A4

A1

A5

704 705701 702 703

A6

F Chest Belt (optional) 1

G Power Cord 1

710709708706 707

GFE

www.smoothfitness.com

5

This list identifies the hardware you will use to assemble the product. To help distinguish between the various types of
screws and bolts, use the scale below to measure them and compare them to the sizes listed.

SUPPLIED HARDWARE

No. Description Qty.

501 4x12mm Screw – Cone Point 4

502 15x22 – M8x10mm Bolt 2

503 15x26 – M8x15mm Bolt 2

504 M8x16mm Allen Head CAP Bolt 4

505 20x78 – M14x35mm Bolt 2

506 4x12mm Screw – Flat Point 6

507 M10x56mm Allen Head Bolt 1

508 M10 Nylon Nut 1

509 4x19mm Screw 3

510 4.5x15mm Screw 6

511 M10x40mm Allen Head CAP Bolt 4

513 8x27x2mm Washer 2

514 8x14xT2.0mm Spring Washer 2

515 M8x20mm Allen Head Bolt 2

516 M5x6mm Screw 2

516

A

D

513

513

520

520

517

521

515

521

508

501

511

B

514

510

506

518

509

505

517 10x16xT2.0mm Spring Washer 4

518 M5x12mm Screw 2

520 8x27x1mm Plastic Washer 2

521 20.7x29.1x0.3mm Wave Washer 2

A 2.5mm Allen Key 1

B 6mm Allen Key 1

C 8mm Allen Key 1

D Wrench 1

H 5mm Allen Key 1

MILLIMETERS

504

C

502

503

507

H

6 SMOOTH AGILE DMT X2

COMPLETE PARTS LIST

Item No. Description Qty. Part No.

100

101 Console Support Tube 1 X2N-101

102 Action Handlebar – Left 1 X2N-102

103 Action Handlebar – Right 1 X2N-103

104 Moving Linkage – Left 1 X2N-104

105 Moving Linkage – Right 1 X2N-105

106 Pedal Arm – Left 1 X2N-106

107 Pedal Arm – Right 1 X2N-107

108 Pedal Swing Arm 2 X2N-108

109 Incline Frame 1 X2N-109

110 Incline Transmission Tube-Front 1 X2N-110

111 Incline Transmission Tube-Back 1 X2N-111

112 Main Frame 1 X2N-112

113 Cover Support Tube 1 X2N-113

115 Tension Wheel Bracket 1 X2N-115

116 Pedal Support Base 2 X2N-116

117 Pedal Buffer Set 2 X2N-117

121 Magnet Bracket 1 X2N-121

122 Motor Bracket 1 X2N-122

200

201 Handlebar Foam Grip 2 X2N-201

202 Handlebar Cap 2 X2N-202

203 Hand Pulse Sensor Back Cover 2 X2N-203

204 Hand Pulse Sensor Cover 2 X2N-204

206 Incline Frame Holder – Rear 2 X2N-206

210 Bearing 6004 4 X2N-210

211 Bearing 2201 2 X2N-211

212 Bearing 608zz 8 X2N-212

213 Moving Linkage Bushing 4 X2N-213

214 Bearing 6804 4 X2N-214

215 Bearing 2203 2 X2N-215

216 Pedal Fixing Base 2 X2N-216

217 Bearing 6205 4 X2N-217

218 Bushing 25.6x28.6x50mm 2 X2N-218

219 Bushing 16x22.2x10.7mm 4 X2N-219

220 Bushing 18x12mm 2 X2N-220

221 Flywheel Pivot 1 X2N-221

222 Bearing 6003 2 X2N-222

223 Aluminum Disk 1 X2N-223

224 Flywheel 1 X2N-224

225 Bearing 6300 2 X2N-225

www.smoothfitness.com

Item No. Description Qty. Part No.

COMPLETE PARTS LIST

226 Crank 2 X2N-226

227 Crank Disk 1 X2N-227

228 Crank Disk Oval Cap 2 X2N-228

229 Crank Axle Bushing 2 X2N-229

230 Bearing 6005 2 X2N-230

231 Crank Disk Axle 1 X2N-231

232 Bearing Holder 1 X2N-232

233 Belt 1 X2N-233

234 Level Adjuster 2 X2N-234

236 Speed Sensor Base 1 X2N-236

237 Overlay 1 X2N-237

238 Speaker Bracket 1 X2N-238

241 10x94 – M12x22mm Bolt 1 X2N-241

242 Magnet 2 X2N-242

243 Compression Spring 1 X2N-243

300

301 Console Housing - Upper 1 X2N-301

302 Console Side Cover 2 X2N-302

303 Fan Cover – Top 1 X2N-303

304 Fan Cover – Bottom 1 X2N-304

305 Vane Adjustment Block 1 X2N-305

306 Fan Holder Ring 2 X2N-306

307 Console Housing – Bottom 1 X2N-307

311 Pivot Cap 2 X2N-311

312 Pivot Arm Bottom Cover – Left 1 X2N-312

313 Pivot Arm Bottom Cover – Right 1 X2N-313

314 iPod Dock Cover – Top 1 X2N-314

315 Action Handlebar Cover – LL 1 X2N-315

316 Action Handlebar Cover – LR 1 X2N-316

317 Action Handlebar Cover – RL 1 X2N-317

318 Action Handlebar Cover – RR 1 X2N-318

319 Switch Plate 1 X2N-319

320 Pedal Soft Cushion 2 X2N-320

321 Pedal 2 X2N-321

322 Rubber Cushion – Front 2 X2N-322

323 Rubber Cushion – Rear 2 X2N-323

324 Pedal Bushing Cover 4 X2N-324

325 Pedal Arm Cover – Top 2 X2N-325

326 Pedal Arm Cover – Bottom 2 X2N-326

327 Crank Disk Cover 2 X2N-327

328 Crank Cover 2 X2N-328

7

8 SMOOTH AGILE DMT X2

Item No. Description Qty. Part No.

COMPLETE PARTS LIST

329 Pedal Swing Arm Cap 2 X2N-329

330 Incline Frame Positioner 1 X2N-330

331 Wheel Cap 112x41.5mm 2 X2N-331

332 Wheel Cap 46x12mm 2 X2N-332

333 Wheel 140x51.86mm 2 X2N-333

334 Bearing Bracket 2 X2N-334

336 Oval Tube Cap 2 X2N-336

337 Rear Cover – Left 1 X2N-337

338 Rear Shroud – Left 1 X2N-338

339 Rear Shroud – Right 1 X2N-339

340 Rear Cover –Right 1 X2N-340

341 Pivot Arm Cover – LL 1 X2N-341

342 Pivot Arm Cover – LR 1 X2N-342

343 Pivot Arm Cover – RL 1 X2N-343

344 Pivot Arm Cover – RR 1 X2N-344

345 Speaker Cover 2 X2N-345

346 Pad 1 X2N-346

347 iPod Bracket 1 X2N-347

348 Speaker Bracket Cover 1 X2N-348

349 iPod Dock Cover – Bottom 1 X2N-349

400

401 4x12mm Screw 6 X2N-401

402 3x10mm Screw – Cone Point 6 X2N-402

403 Taper Fixing Insert 27 X2N-403

404 M8x16mm Allen Head CAP Bolt 4 X2N-404

405 8x14xT2.0mm Spring Washer 11 X2N-405

406 M10x20mm Allen Head Cap Bolt 4 X2N-406

407 4x19mm Screw 12 X2N-407

408 4x15mm Screw – Cone Point 2 X2N-408

409 4x12mm Screw – Flat Point 4 X2N-409

410 M5x12mm Screw 8 X2N-410

411 4x12mm Screw – Cone Point 28 X2N-411

412 M32 C Clip 2 X2N-412

413 12x20x2mm PU Washer 2 X2N-413

414 M6x12mm Allen Head Bolt 10 X2N-414

415 M8x20mm Allen Head Bolt 1 X2N-415

416 M8x15mm Allen Head Bolt 15 X2N-416

417 M8 Nylon Nut 10 X2N-417

418 M8x20mm Bolt 6 X2N-418

419 Bushing 12x60mm 4 X2N-419

420 M8x90mm Allen Head Bolt 4 X2N-420

421 M12 C Clip 2 X2N-421

422 12x20x0.5mm Plastic Washer 2 X2N-422

www.smoothfitness.com

Item No. Description Qty. Part No.

COMPLETE PARTS LIST

423 2.5x7mm Screw 14 X2N-423

424 M6x12mm Allen Head CAP Bolt 3 X2N-424

425 6x10x1mm Spring Washer 11 X2N-425

426 20x6xT1.5mm Washer 2 X2N-426

427 M42 C Clip 2 X2N-427

428 M8x16mm Allen Head Bolt 8 X2N-428

429 M10x20mm Bolt 4 X2N-429

430 10x16x2mm Spring Washer 8 X2N-430

431 10x30xT3.0 Washer 3 X2N-431

432 M4 Nylon Nut 2 X2N-432

433 M10 Nylon Nut 2 X2N-433

434 17.2x22x1mm Washer 2 X2N-434

435 16x25xT3.0 Washer 4 X2N-435

436 M10x40mm Allen Head Bolt 1 X2N-436

437 M6x12mm Screw 6 X2N-437

438 17x22xT1.5mm Plastic Washer 3 X2N-438

439 M6x40mm Bolt 2 X2N-439

440 M12 Nylon Nut 1 X2N-440

441 10x18xT5.1mm Washer 2 X2N-441

442 M10x45mm Bolt 1 X2N-442

443 M5x10mm Bolt 1 X2N-443

445 Pedal Arm Pivot 2 X2N-445

446 3/4” Nut 2 X2N-446

447 M8x30mm Allen Head CAP Bolt 2 X2N-447

448 M4x15mm Screw 2 X2N-448

449 M6x45mm Allen Head Bolt 2 X2N-449

450 M3x16mm Screw 6 X2N-450

451 M4x45mm Allen Head CAP Bolt 1 X2N-451

452 M5x8mm Allen Head Bolt 2 X2N-452

453 M4x8mm Screw 4 X2N-453

454 Pin Nut 4 X2N-454

455 10x23xT2.0mm Washer 2 X2N-455

456 M3x8mm Screw 6 X2N-456

457 Iron Plate Nut 6 X2N-457

458 M5x12mm Screw 4 X2N-458

459 M8x45mm Bolt 3 X2N-459

460 8x16xT1.0mm Washer 3 X2N-460

461 M6 Nylon Nut 3 X2N-461

462 4x10mm Screw – Cone Point 2 X2N-462

463 M4 Nut 4 X2N-463

464 3x12mm Screw – Cone Point 6 X2N-464

9

10 SMOOTH AGILE DMT X2

Item No. Description Qty. Part No.

COMPLETE PARTS LIST

465 M5x16mm Screw 2 X2N-465
466 M4x10mm Screw 4 X2N-466

467 M5x15mm Screw 1 X2N-467
468 M5 Nut 2 X2N-468
469 5mm Lock Washer 1 X2N-469
470 12x18x1.5mm Plastic Washer 2 X2N-470
471 3x12mm Screw 2 X2N-471
476 M3x10mm Screw – Cone Point 2 X2N-476
478 M5x5mm Bolt 1 X2N-478
479 M3 Nut 2 X2N-479
480 3x5x1mm Washer 4 X2N-480

500

501 4x12mm Screw – Cone Point 4 X2N-501
502 15x22 – M8x10mm Bolt 2 X2N-502

503 15x26 – M8x15mm Bolt 2 X2N-503
504 M8x16mm Allen Head CAP Bolt 4 X2N-504
505 20x78 – M14x35mm Bolt 2 X2N-505
506 4x12mm Screw – Flat Point 6 X2N-506
507 M10x56mm Allen Head Bolt 1 X2N-507
508 M10 Nylon Nut 1 X2N-508
509 4x19mm Screw 3 X2N-509
510 4.5x15mm Screw 6 X2N-510
511 M10x40mm Allen Head CAP Bolt 4 X2N-511
513 8x27x2mm Washer 2 X2N-513
514 8x14xT2.0mm Spring Washer 2 X2N-514
515 M8x20mm Allen Head Bolt 2 X2N-515

516 M5x6mm Screw 2 X2N-516
517 10x16xT2.0mm Spring Washer 4 X2N-517
518 M5x12mm Screw 2 X2N-518
520 8x27x1mm Plastic Washer 2 X2N-520
521 20.7x29.1x0.3mm Wave Washer 2 X2N-521

600

601 4Pin Power Wire – Upper 1 X2N-601
602 4Pin Power Wire – Middle 1 X2N-602
603 4Pin Power Wire – Lower 1 X2N-603
604 6Pin Motor Connection Wire 1 X2N-604
605 Power Connection Wire 3 X2N-605
606 3C Power Wire 1 X2N-606

607 Hand Pulse Sensor Wire – Upper 2 X2N-607
608 Hand Pulse Sensor Wire – Middle 2 X2N-608
609 Hand Pulse Sensor Wire – Lower 2 X2N-609
610 PC Board 1 X2N-610
611 6Pin Control Board Connection Wire 1 X2N-611
612 Receiver Wire 1 X2N-612

www.smoothfitness.com

Item No. Description Qty. Part No.

COMPLETE PARTS LIST

613 Button Board 1 X2N-613

614 Fan 1 X2N-614

615 Receiver 1 X2N-615

616 Elevation Motor 1 X2N-616

617 Speed Sensor 1 X2N-617

618 Transformer 1 X2N-618

619 Control Board 1 X2N-619

620 Power Insert 1 X2N-620

621 Power Switch 1 X2N-621

622 Power Breaker 1 X2N-622

623 Motor 1 X2N-623

624 Magnetic Sensor 1 X2N-624

625 Limit Position Wire 1 X2N-625

627 Cable Plug 2 X2N-627

628 Touch Control Board 1 X2N-628

629 iPod dock connect 6pins wire 1 X2N-629

630 Amplifier volume control 3pins wire 1 X2N-630

631 Amplifier power connect 2pin wire 1 X2N-631

632 iPod dock PC board 1 X2N-632

633 Speaker 2 X2N-633

634 Amplifier PC board 1 X2N-634

700

701 Action Handlebar Lower Cover 4 X2N-701

702 Pedal Arm Front Pivot Cover 2 X2N-702

703 Incline Frame Cover 1 X2N-703

704 Undercarriage Cover – Left 1 X2N-704

705 Undercarriage Cover – Right 1 X2N-705

706 Nylon Bushing 2 X2N-706

707 Action Handlebar Cap 2 X2N-707

708 Incline Frame Holder – Front 2 X2N-708

709 Console Support Tube Cover – Rear 1 X2N-709

710 Console Support Tube Cover – Front 1 X2N-710

11

12 SMOOTH AGILE DMT X2

5

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

346

347

464

345

470

465

632

314

464

470

465

349

34

237

302

305

301

303

302

614

306

304

506

613

423

101

709

423

423

610

401

518

463

633

307

466

710

506

458

238

401

463

348

464

466

633

2

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

402

201

www.smoothfitness.com

13

707

203

315

413

403

515

501

412

514

211

513

701

204

520

210

502

503

104

202

102

701

627

501

316

407

504

706

202

504

706

201

407

407

501

627

317

701

105

204

210

502

211

413

103

513

503

412

520

514

701

515

501

403

203

318

40

707

14 SMOOTH AGILE DMT X2

4

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

320

424

425

411

426

427

215

324

325

326

403

417

216

411

212

421

411

416

321.

323

417

418

106

422

213

428

214

324

419

213

414

322

416

116

117

420

212

521

411

505

702

411

324

411

326

320

416

416

323

418

212

213

417

417

216

403

428

215

426

107

424

414

321

416

116

117

419

428

212

324

322

702

505

521

213

411

21

422

421

420

325

411

427

425