Smooth Fitness 9.15HR User Manual
USER’S MANUAL
SMOOTH 9.15HR POWER FOLDING TREADMILL
MODEL NUMBER: 9.15HR
USER WEIGHT LIMITATION: 300lbs.
TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.1167
SERIAL NUMBER (found on frame):
2
SMOOTH 9.15HR POWER FOLDING TREADMILL
PRECAUTIONS
For future service or related questions:
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth
Fitness treadmill.
Name: ______________________________ Phone Number: ___________________ Receipt: ______________________
Precautions:
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and
information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are
adequately informed of all warnings and precautions.
?? Use the treadmill only as described in this manual.
?? Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that
blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
?? When choosing a location for the treadmill make sure that the location and position permit access to a plug.
?? Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or
near water.
?? Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
?? Keep children under the age of 12 and pets away from the treadmill at all times.
?? The treadmill should not be used by persons weighing more than 300lbs.
?? Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the
treadmill. Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are
recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
?? When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the
same circuit.
?? Always straddle the belt and allow it to start moving before stepping onto the belt.
?? Always examine your treadmill before using to ensure all parts are in working order.
?? Allow the belt to fully stop before dismounting.
?? Never insert any object or body parts into any opening.
?? Follow the safety information in regards to plugging in your treadmill.
?? Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill. Do not
operate the treadmill with a damaged or frayed power cord.
?? Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by
an authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow
these instructions will void the treadmill warranty.
?? Never leave the treadmill unattended while it is running.
Visit us at: www.smoothfitness.com
3
SMOOTH 9.15HR POWER FOLDING TREADMILL
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN
ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO
WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE
PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges
and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the
possibility of treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector
with a UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less
and an electrical rating 120VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for
electric current, should the treadmill malfunction. This treadmill comes with an electrical cord having an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated in the
drawing below.
Visit us at: www.smoothfitness.com
4
SMOOTH 9.15HR POWER FOLDING TREADMILL
PREASSEMBLY
Open the boxes:
You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the
boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be
assembled properly. If you are missing any parts or have any assembly questions call your local Smooth Retailer.
Gather your tools:
Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require to
assemble the unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick and
hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free
from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable
amount of free area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person
when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 300lbs. it is not recommended that
you use this product. Serious injury may occur if the user’s weight exceeds the limit shown here. This product is not
intended to support users whose weight exceeds this limit.
Visit us at: www.smoothfitness.com
5
SMOOTH 9.15HR POWER FOLDING TREADMILL
HARDWARE COMPARISON CHART
Hardware chart:
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help
you identify those items that may be unfamiliar to you.
NO. DESCRIPTION QTY.
17 ALLEN HEAD BOLT 8
40 METAL CAP 2
46 BOLT 2
52 M5 x 20mm SCREW 2
55 M4 x 15mm SCREW 4
70 M4 x 20mm SCREW 4
A SCREWDRIVER 1
B ALLEN WRENCH 1
C WRENCH 1
MILLIMETERS
Visit us at: www.smoothfitness.com
6
SMOOTH 9.15HR POWER FOLDING TREADMILL
PARTS LIST
No. Description Qty. Order No. No. Description Qty. Order No.
1
BASE FRAME
2
POWER SWITCH
3
COMPUTER SUPPORT
4
DRIVING TUBE
5
WHEEL SUPPORT
6
RIGHT HANDLE UPRIGHT
7
LEFT HANDLE UPRIGHT
8
BASE FRAME
9
ELEVATION SUPPORT
11
DRIVING ROD
12
MOTOR BELLY PAN
13
16 X 35.5MM SHAFT
14
HAND PULSE SENSORS
15
DECK/BASE SCREW
16
SPRING LOADED KNOB
17
ALLEN HEAD BOLT
1 9.15HR-01 31
1 9.15HR-02 32
1 9.15HR-03 33
1 9.15HR-04 34
1 9.15HR-05 35
1 9.15HR-06 36
1 9.15HR-07 37
1 9.15HR-08 38
1 9.15HR-09 39
2 9.15HR-11 40
1 9.15HR-12 41
3 9.15HR-13 42
2 9.15HR-14 43
2 9.15HR-15 44
1 9.15HR-16 45
8 9.15HR-17 46
SIDE RAIL GRIP
DECK SCREW
DECK RUBBER CUSHION
TRANSPORT WHEEL
REAR WHEEL
RUNNING BELT
POWERFOLD SWITCH
REAR WHEEL SCREW
CONSOLE
METAL CAP
HANDLEBAR FRONT END
CAP LEFT #1
HANDLEBAR FRONT END
CAP RIGHT #1
HANDLEBAR FRONT END
CAP LEFT #2
HANDLEBAR FRONT END
CAP RIGHT #2
UPRIGHT CROSS BRACE
BOLT
2 9.15HR-31
10 9.15HR-32
10 9.15HR-33
2 9.15HR-34
4 9.15HR-35
1 9.15HR-36
1 9.15HR-37
2 9.15HR-38
1 9.15HR-39
2 9.15HR-40
1 9.15HR-41
1 9.15HR-42
1 9.15HR-43
1 9.15HR-44
1 9.15HR-45
2 9.15HR-46
18
CONSOLE SUPPORT SCREW
19
DRIVING DC MOTOR
20
MOTOR HOLDER
21
MOTOR DRIVE BELT
22
ROLLER FLYWHEEL
23
MOTOR FLYWHEEL
24
FRONT ROLLER
25
REAR ROLLER
26
TRANSPORT WHEEL BOLT
27
HANDLEBAR GRIP
28
MOTORHOOD
29
RUNNING DECK
30
M8 X 43 CARRIAGE BOLT
2 9.15HR-18 47
1 9.15HR-19 48
1 9.15HR-20 49
1 9.15HR-21 50A
1 9.15HR-22 50B
1 9.15HR-23 51
1 9.15HR-24 52
1 9.15HR-25 53
2 9.15HR-26 54
2 9.15HR-27 55
1 9.15HR-28 56
1 9.15HR-29 57
2 9.15HR-30 58
SAFETY KEY
ELEVATION MOTOR
SUPPORT BRACKET COVER
HANDLEBAR (RIGHT)
HANDLEBAR (LEFT)
CONSOLE SUPPORT
LOCATING SCREW
CONSOLE SCREW
PIVOT BRACKET SCREW
PIVOT BRACKET
M4 X 15 SCREW
FRONT SHROUD
DECK REAR END CAP - LEFT
DECK REAR END CAP -
RIGHT
1 9.15HR-47
1 9.15HR-48
2 9.15HR-49
1 9.15HR-50A
1 9.15HR-50B
1 9.15HR-51
2 9.15HR-52
4 9.15HR-53
2 9.15HR-54
32 9.15HR-55
1 9.15HR-56
1 9.15HR-57
1 9.15HR-58
Visit us at: www.smoothfitness.com
7
SMOOTH 9.15HR POWER FOLDING TREADMILL
PARTS LIST
No. Description Qty. Order No. No. Description Qty. Order No.
HANDLEBAR END CAP (RIGHT &
59
LEFT)
BASE FRAME END CAP (FRONT &
60
REAR)
2 9.15HR-59
4 9.15HR-60
61
LEVEL ADJUSTER
62
SCREW
63
M8 LOCK NUT
64
ALLEN HEAD BOLT
65
MOTOR BOTTOM TRAY
66
RUNNING DECK BELLY PAN
67
ELEVATION MOTOR COVER
68
TENSION BOLT
69
FRONT SHROUD SCREW
70
M4 X 20 SCREW
71
SPACER
72
SPACER SCREW
73
REAR WHEEL NUT
74
NUT
75
POWER CORD
76
POWER BOARD
4 9.15HR-61
4 9.15HR-62
4 9.15HR-63
1 9.15HR-64
1 9.15HR-65
1 9.15HR-66
1 9.15HR-67
2 9.15HR-68
2 9.15HR-69
4 9.15HR-70
8 9.15HR-71
16 9.15HR-72
2 9.15HR-73
2 9.15HR-74
1 9.15HR-75
1 9.15HR-76
77
MOTOR CONTROL BOARD
78
REED SWITCHES
79
COIL
ELEVATION MOTOR CONTROL
80
BOARD
81
CHEST BELT PULSE SENSOR
1 9.15HR-77
2 9.15HR-78
1 9.15HR-79
1 9.15HR-80
1 9.15HR-81
Visit us at: www.smoothfitness.com
8
SMOOTH 9.15HR POWER FOLDING TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.smoothfitness.com
9
SMOOTH 9.15HR POWER FOLDING TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.smoothfitness.com
10
SMOOTH 9.15HR POWER FOLDING TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.smoothfitness.com
11
SMOOTH 9.15HR POWER FOLDING TREADMILL
ASSEMBLY
STEP 1:
Remove your 9.15HR Treadmill from the carton and place it on the floor in an open area as shown in FIG-1.
NOTE: When attaching the Handle Uprights (6 and 7) to the Base Frame (1) you will need the help of a friend.
First make sure to connect the wires. Then, simply have one person hold the Handle Uprights (6 and 7) in place on the Base
Frame (1) while the other secures it with Allen Bolts (17).
Visit us at: www.smoothfitness.com
Loading...