Smooth Fitness 8.25E User Manual

USER’S MANUAL

8.25E MOTORIZED TREADMILL

MODEL NUMBER: 8.25E

USER WEIGHT LIMITATION: 400 lbs.(180kgs)

SERVICENUMBER: 0800-09 72 100

SERIAL NUMBER (found on frame):

2 8.25E TREADMILL

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and

information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are ade quately
informed of all warnings and precautions.

PRECAUTIONS

• Use the treadmill only as described in this manual.

• Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that blocks air

openings. To protect the floor or carpet from damage, place a mat under the treadmill.

• When choosing a location for the treadmill make sure that the location and position permit access to a plug.

• Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near

water.

• Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

• Keep children under the age of 12 and pets away from the treadmill at all times.

• The treadmill should not be used by persons weighing more than 400 lbs (180 kg).

• Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the treadmill.

Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommended for both
men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals.

• When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the same
circuit.

• Always straddle the belt and allow it to start moving before stepping onto the belt.

• Always examine your treadmill before using to ensure all parts are in working order.

• Allow the belt to fully stop before dismounting.

• Never insert any object or body parts into any opening.

• Follow the safety information in regards to plugging in your treadmill.

• Keep the power cord away from the incline wheels and do not run the power cord undern eath your treadmill. Do not

operate the treadmill with a damaged or frayed power cord.

• Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an
authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow these
instructions will void the treadmill warranty.

• Never leave the treadmill unattended while it is running.

• The equipment is for Class B (Home Use).

www.smoothfitness.co.uk

www.smoothfitness.co.uk

IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE
PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT
THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.

This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges and
noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of
treadmill damage, always use a surge protector (not included) with your treadmill. Surge protectors can be purchased at most
hardware stores.

This treadmill is provided with two different grounding plugs for Central Europe and United Kingdom. Please choos e the right one
and plug in your treadmill.

Please make sure that your local voltage is appropriate for the power requirements of this treadmill before you plug it in.
This product is for use with a voltage of 230V

Do not use a voltage transformer with this product.
Do not use an extension cord with this product when you are not sure if the product is still properly grounded.

The following pictures show the two delivered plugs:

POWER REQUIREMENTS

+ 5%.

3

www.smoothfitness.co.uk

4 8.25E TREADMILL

Open the boxes:

You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes.
Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be assembled properly. If
you are missing any parts or have any assembly questions call your local Smooth Retailer.

Gather your tools:
Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you ma y require to assemb le the

unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free from

anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable amount of free
area around the unit for unobstructed operation.

Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person when

assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 400 lbs (180 Kg) it is not recommended that

you use this product. Serious injury may occur if the user’s weight exceeds the limit shown here. This product is not
intended to support users whose weight exceeds this limit.

Care and Maintenance:

1. The safety level can be maintained only if it is examined for damage and wear.

2. Replace the defect components immediately and stop to use the equipment until repair.

3. Always care that you mount on the equipment steady before you start to use the equipment. Dismount from the equipment after

4. Always check the easily wear components like pulley etc. to prevent danger.

5. There is an emergency stop to prevent dangers, you can stop the treadmill immediately by actuated the emergency stop for

PREASSEMBLY

all parts are stop.

emergency dismount.

www.smoothfitness.co.uk

www.smoothfitness.co.uk

Carton contents:

For your convenience, we have identified the contents of the shipping carton. Please check to make sure you have all of the
components before assembly. This chart is provided to help you identify the components used in the assembly of this product.

CONTENTS CHECKLIST

5

No. Description Qty.

A

Computer

1
B Front Handlebar Assembly 1
C Handlebar 2
D Upright Assembly Left 1
E Upright Assembly Right 1
F Main Frame Assembly 1
310 Adjustable Cylinder 2
303 Upright Cover - LL 1
304 Upright Cover - LR 1
305 Upright Cover - RL 1
306 Upright Cover - RR 1
311 Upright Plastic Shroud - LL 1
312 Upright Plastic Shroud - LR 1
313 Upright Plastic Shroud - RL 1
314 Upright Plastic Shroud - RR 1

310

C

311

A

D

303

312

E

313

B

F

305304

314

306

315

315 Adjustable Cylinder Cover - Upper 2

www.smoothfitness.co.uk

6 8.25E TREADMILL

Hardware chart:

For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help you
identify those items that may be unfamiliar to you.

HARDWARE COMPARISON CHART

No. Description Qty.

804

M8 x 15mm Bolt

2
805 M8 x 50mm Bolt 12
806 #8 x 19mm Screw 16
807 #8 x 19mm Screw 17
826 M8 Nut 2
843 M8 x 15 mm Bolt 4
844 Spacer 4
845 13 x 42mm Axle 2
846 8 x 23mm Washer 2
A 5mm Allen Key 1
B 8mm Allen Key 1
C Screw Driver 1
D 5mm Allen Wrench 1
E Spanner 1

826

804

843

B

805

844

CEA

806

845

807

846

D

MILLIMETERS

www.smoothfitness.co.uk

www.smoothfitness.co.uk

7

PARTS LIST

No. Description Qty. Order No.

8.25-100

8.25-101

8.25-102

8.25-103

8.25-104

8.25-105

8.25-106

8.25-107

8.25-108

8.25-109

8.25-110

8.25-111

8.25-112

8.25-113

8.25-114

8.25-115

8.25-116

8.25-200

8.25-201

8.25-202

8.25-203

8.25-204

8.25-205

8.25-206

8.25-207

8.25-208

8.25-300

8.25-301

8.25-302

8.25-303

8.25-304

8.25-305

8.25-306

8.25-307

8.25-308

Console Assembly

Overlay
Computer Insert
Console PC Board
Console Housing - Upper
Console Housing - Bottom
Safety key Base
Safety Key
Safety Key Wire - Upper
Computer Wire - Upper
Computer Ground Wire
Hand Pulse Wire - Upper
E - Prom
Motion Control Board
Motion Control Board Wire
Motion Control Sensor Wire
Water Bottle Holder

Handle Bar Assembly

Handle Bar Upright
Handle Bar Upright Foam Grip
Front Handle Bar
Front Handle Bar Foam Grip-Short
Front Handle Bar Foam Grip-Long
Hand Pulse Set
Motion Control
Motion Control Base

Upright Assembly

Upright-L
Upright-R
Upright Cover-LL
Upright Cover-LR
Upright Cover-RL
Upright Cover-RR
Safety Key Wire - Middle
Computer Wire - Upper

1 8.25-101
1 8.25-102
1 8.25-103
1 8.25-104
1 8.25-105
1 8.25-106
1 8.25-107
1 8.25-108
1 8.25-109
1 8.25-110
2 8.25-111
1 8.25-112
1 8.25-113
1 8.25-114
2 8.25-115
2 8.25-116

2 8.25-201
2 8.25-202
1 8.25-203
1 8.25-204
2 8.25-205
2 8.25-206
2 8.25-207
2 8.25-208

1 8.25-301
1 8.25-302
1 8.25-303
1 8.25-304
1 8.25-305
1 8.25-306
1 8.25-307
1 8.25-308

GM BOM NO.

PL-COI-LED17

PL-COU-XT220
PL-COD-XT220
AP-010-01-PL
PL-AP-004

PL-WBI-XT220

IR-HD-X8.25-01
FO-RO-38X3X950
IR-WD-FHD-XT220
FO-RO-38X3X1108
FO-RO-38X3X1108
EL-HP-001-R038.1
AP-011-01-1
AP-011-02-1

IR-WD-UR-X8.25
IR-WD-UR-X8.25
PL-URCLL-XT220
PL-URCLR-XT220
PL-URCRL-XT220
PL-URCRR-XT220

www.smoothfitness.co.uk

8 8.25E TREADMILL

PARTS LIST

No. Description Qty. Order No.

Motion Control Sensor Wire - Middle
Adjustable Cylinder
Upright Plastic Shroud – LL
Upright Plastic Shroud – LR
Upright Plastic Shroud – RL
Upright Plastic Shroud – RR
Adjustable Cylinder Cover - Upper
Fixing Inserts

Base Frame Assembly

Base Frame
Safety Key Wire - Lower
Computer Wire -Lower
Power Switch Plate Cover
Power Switch Plate
Power Breaker
Power Switch
Fold UP Support
Foot Locker
Foot Locker Spring
Shock
Fix Bolt Sets
Front Caster
Rubber Cushion
Level Adjuster
Base Frame End Cap
Cushion
Transportation Wheel Bracket
Transportation Wheel Bracket
Spring
Rear Transportation Wheel
Plastic Insert
Fold Up Support Wheel

2 8.25-309
2 8.25-310
1 8.25-311
1 8.25-312
1 8.25-313
1 8.25-314
2 8.25-315
2 8.25-316

1 8.25-401
1 8.25-402
1 8.25-403
1 8.25-404
1 8.25-405
1 8.25-406
1 8.25-407
1 8.25-408
1 8.25-409
1 8.25-410
1 8.25-411
2 8.25-412
2 8.25-413
2 8.25-414
2 8.25-415
2 8.25-416
2 8.25-417
2 8.25-418
1 8.25-419
1 8.25-420
1 8.25-421
1
1 8.25-423

8.25-309

8.25-310

8.25-311

8.25-312

8.25-313

8.25-314

8.25-315

8.25-316

8.25-400

8.25-401

8.25-402

8.25-403

8.25-404

8.25-405

8.25-406

8.25-407

8.25-408

8.25-409

8.25-410

8.25-411

8.25-412

8.25-413

8.25-414

8.25-415

8.25-416

8.25-417

8.25-418

8.25-419

8.25-420

8.25-421

8.25-422

8.25-423

AP-014-01-IR
PL-OPCRR-X8.25
PL-OPCRL-X8.25
PL-OPCLR-X8.25
PL-OPCLL-X8.25
PL-OPCU-X8.25

IR-WD-BF-XT220

AP-005-01-PL
AP-005-02-PL
AP-005-04-PL
AP-005-03-PL
IR-WD-MF-XT220
AP-004-01-IR
IR-BOLT-07-D2X270
AP-012-O
AP-001
RU-MW-10X100X25
RU-FS-FX-D30X8.5
RU-FS-AD-M8X38.5

RU-FS-FX-101X36X17.5
AP-003-02-IR-2
AP-003-01-IR

RU-MW-D38X22

8.25-422 IR-BOLT-06-03-10X16X8.5
RU-MW-12X25X25

GM BOM NO.

www.smoothfitness.co.uk

www.smoothfitness.co.uk

9

PARTS LIST

No. Description Qty. Order No.

Bushing

Motor Assembly

Motor Hood
Elevation Motor
Elevation Gear Sleeve
Driving Motor
Motor Holder
Driving Belt
Motor Control Board
Elevation Control Board
Elevation Support Tube
Elevation Support Tube Cover - Left
Motor Bottom Cover
Deck Frame Side Cover - Left
Plastic Clamp - Top
Plastic Clamp - Bottom
Elevation Support
Elevation Support Cap
Deck Rubber Cushion
Rear Vent Cover
Elevation Support Tube Cover - Right
Deck Frame Side Cover - Right

Running Deck Assembly

Running Belt
Side Rail
Side Rail End Cap - Left
Side rail End Cap - Right
Running Deck

Deck Frame Assembly

Deck Frame
Front Roller Shaft
Front Roller Tube

2 8.25-424

1 8.25-501
1 8.25-502
1 8.25-503
1 8.25-504
1 8.25-505
1 8.25-506
1 8.25-507
1 8.25-508
1 8.25-509
1 8.25-510
1 8.25-511
1 8.25-512
2 8.25-513
2 8.25-514
2 8.25-515
2 8.25-516
2 8.25-517
1 8.25-518
1 8.25-519
1 8.25-520

1 8.25-601
2 8.25-602
1 8.25-603
1 8.25-604
1 8.25-605

1 8.25-701
1 8.25-702
1 8.25-703

8.25-424

8.25-500

8.25-501

8.25-502

8.25-503

8.25-504

8.25-505

8.25-506

8.25-507

8.25-508

8.25-509

8.25-510

8.25-511

8.25-512

8.25-513

8.25-514

8.25-515

8.25-516

8.25-517

8.25-518

8.25-519

8.25-520

8.25-600

8.25-601

8.25-602

8.25-603

8.25-604

8.25-605

8.25-700

8.25-701

8.25-702

8.25-703

IR-BOLT-06-03-10X17.5

PL-MCU-XT220
EL-MO-IS25
EL-MO-JS25-O
EL-MO-B1K-1.2HP-4800RPM
AL-TL-01-118
RU-PB-250J-7

IR-WD-EF-XT220
PL-EFCL-XT220
PL-MCU-XT220
PL-MCSL-XT220
PL-AP-002
PL-AP-003
IR-AP-002
PL-ROC-19.4

PL-MCU-XT220
PL-EFCR-XT220
PL-MCSR-XT220

RU-RB-1.6X493X2760
PL-SRL-XT220
PL-ECL-XT220
PL-ECR-XT220
WO-RB-1195X652X19

IR-WD-RF-XT220
AP-007-04-15X570-IR
AP-007-63.5X117

GM BOM NO.

www.smoothfitness.co.uk

10 8.25E TREADMILL

PARTS LIST

No. Description Qty. Order No.

8.25-704 Roller Bearing 6202

8.25-705 Rear Roller Shaft

8.25-706 Rear Roller Tube

8.25-707 Running Deck Support Tube

8.25-708 Deck Frame - Rear

8.25-413 Rear Caster

8.25-800 Fastening

8.25-801

8.25-802

8.25-803

8.25-804 M8 x 15mm Bolt

8.25-805 M8 x 50mm Bolt

8.25-806 #8 x 19mm Screws

8.25-807 #8 x 19mm Screws

8.25-808

8.25-809

8.25-810 C Fixed

8.25-811

8.25-812 Bearing

8.25-813 Washer

8.25-814 Nylon Nut

8.25-815 M8 x 35mm Axle

8.25-816

8.25-817 Bearing

8.25-818

8.25-819

8.25-820

8.25-821

8.25-822 Fixed Block

8.25-823

8.25-824 Plate Washer

8.25-825 Spring

8.25-826 Nylon Nut

＃6 × 12mm Screws
＃4 × 6mm Screws
＃8 × 12mm Screws

M5 × 10mm Screws
＃8 × 16 Screws

M10 × 30mm Bolts

M14 × 90 Screws

M10 × 35mm Screws

＃8 × 10mm Screws
＃8 × 50mm Screws

M10 × 63mm Bolts

M8 × 120mm Bolts

4 8.25-704
1 8.25-705
1 8.25-706
1 8.25-707
1 8.25-708
2 8.25-413

12 8.25-801
12 8.25-802

8 8.25-803

2 8.25-804
16 8.25-805
25 8.25-806
19 8.25-807

3 8.25-808
36 8.25-809

1 8.25-810

1 8.25-811

1 8.25-812

8 8.25-813

7 8.25-814

1 8.25-815

2 8.25-816

4 8.25-817
10 8.25-818

7 8.25-819

2 8.25-820

1 8.25-821

8 8.25-822

1 8.25-823

2 8.25-824

1 8.25-825

3 8.25-826

GM BOM NO.

IR-BR-6202
AP-008-01-15X574-IR
AP-008-63.5
AP-009-01-SQ-22X640
AP-009-02-FO-22.23X3X450
RU-MW-10X100X25

IR-BOLT-02-03-M3X12X12
IR-BOLT-02-03-M2X6X6
IR-BOLT-02-03-M4X12-S
IR-BOLT-01-08-M8X15X15
IR-BOLT-01-01-M8X50X50
IR-BOLT-02-03-M4X19-S
IR-BOLT-02-03-M4X15-S
IR-BOLT-01-01-M5X10X10
IR-BOLT-02-03-M4X15

IR-BOLT-01-10-M10X30
IR-BOLT-06-02-7X11
IR-BOLT-05-01-4.5X10X1
IR-BOLT-03-02-M10X16X10

IR-BOLT-01-10-M14X90X29
IR-BOLT-06-02-5X6X10
IR-BOLT-01-08-M10X35X15
IR-BOLT-02-03-M4X10-S
IR-BOLT-02-03-M4X50
IR-BOLT-01-10-10X61
PL-AP-001
IR-BOLT-01-09-M8X120X35
IR-BOLT-05-01-8X40X2
RU-BS-8X22.5X14
IR-BOLT-03-02-M8X14X8

www.smoothfitness.co.uk

www.smoothfitness.co.uk

11

PARTS LIST

No. Description Qty. Order No.

8.25-827

8.25-828

8.25-829

8.25-830

8.25-831

8.25-832

8.25-833

8.25-834

8.25-835

8.25-836

8.25-837

8.25-838

8.25-839

8.25-840

8.25-841

8.25-842

8.25-843

8.25-844

8.25-845

8.25-846

M8 × 20mm Screws
Spring Washer
Washer

M10 × 136mm Screws
M10 × 90mm Screws
M8 × 25mm Screws
Hexagon Nut
M6 × 70mm Bolts
Washer
M10 x 40mm Axle
C Fixed
M10 × 43mm Bolts
Cushion Pad
M10 × 40mm Screws
M6 × 10mm Screws
M10 × 52mm Screws
M8 × 15mm Allen Head Bolt
Plastic Spacer
13 × 42mm Bolt
Washer

6 8.25-827

10 8.25-828

2 8.25-829
1 8.25-830
1 8.25-831
8 8.25-832
8 8.25-833
3 8.25-834
3 8.25-835
1 8.25-836
2 8.25-837
2 8.25-838
8 8.25-839
1 8.25-840
2 8.25-841
1 8.25-842
4 8.25-843
4 8.25-844
2 8.25-845
2 8.25-846

IR-BOLT-01-08-M8X20X20
IR-BOLT-05-01-8X14X2
IR-BOLT-05-01-8X16X3
IR-BOLT-01-06-M10X136X13
IR-BOLT-01-06-M10X90X13
IR-BOLT-01-02-M8X25X25
IR-BOLT-04-01-M8X13X6.5
IR-BOLT-01-05-M6X70X70
IR-BOLT-05-01-6X13X1
IR-BOLT-01-10-M10X40X4
IR-BOLT-06-03-M10C
IR-BOLT-01-10-M10X42
AP-006
IR-BOLT-01-05-M10X40X15
IR-BOLT-01-01-M6X10X10
IR-BOLT-01-06-M10X52X30
IR-BOLT-01-01-M8X15X15
UR-BS-13X17X7.5
IR-BOLT-01-10-13X42
IR-BOLT-05-01-8X23X2

GM BOM NO.

www.smoothfitness.co.uk

12 8.25E TREADMILL

A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.

PARTS DIAGRAM

www.smoothfitness.co.uk

www.smoothfitness.co.uk

A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.

PARTS DIAGRAM

13

www.smoothfitness.co.uk

14 8.25E TREADMILL

A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.

PARTS DIAGRAM

www.smoothfitness.co.uk

www.smoothfitness.co.uk

PARTS DIAGRAM

A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.

15

www.smoothfitness.co.uk