Smooth Fitness 7.6HR PRO User Manual
USER’S MANUAL
7.6HR PRO MOTORIZED TREADMILL
USER WEIGHT LIMITATION: 350lbs(160kgs).
SERIAL NUMBER (found on frame):
ST-MNL-76HR-SMUS-1
2 7.6HR PRO TREADMILL
For future service or related questions:
Please staple your receipt and/or write in the name and phone number of the retai l store where you purchased your treadmill.
Name: ______________________________ Phone Number: ___________________ Receipt: _____ _________________
Precautions:
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and
information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are
adequately informed of all warnings and precautions.
PRECAUTIONS
• Use the treadmill only as described in this manual.
• Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that blocks air
openings. To protect the floor or carpet from damage, place a mat under the treadmill.
• When choosing a location for the treadmill be sure that the location and position permit access to a plug.
• Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near
water.
• Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
• Keep children under the age of 12 and pets away from the treadmill at all times.
• The treadmill should not be used by persons weighing more than 350LBS (160 Kgs).
• Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the treadmill.
Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommended for both
men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in
sandals.
• When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the same
circuit.
• Always straddle the belt and allow it to start moving before stepping onto the belt.
• Always examine your treadmill before using to ensure all parts are in working order.
• Allow the belt to fully stop before dismounting.
• Never insert any object or body parts into any opening.
• Follow the safety information in regards to plugging in your treadmill.
• Keep the power cord away from the incline wheels and do not run the power cord undern eath your treadmill. Do not
operate the treadmill with a damaged or frayed power cord.
• Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an
authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow these
instructions will void the treadmill warranty.
• Never leave the treadmill unattended while it is running.
• Use “safety key” when operating the treadmill and make sure the “safet y ke y” is clipped to the users clothing.
• Remove the “safety key” and store it in a safe place when the treadmill is not in use. Keep the “safety key” away from
children.
www.smoothfitness.com
3
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE
PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT
THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges and
noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of
treadmill damage, always use a surge protector (not included) with your treadmil l.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a
UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an
electrical rating 110VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric
current, should the treadmill malfunction. This treadmill is equipped with an electrical cord that has an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug il lustrated in the drawing
below.
GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI Circuit Breakers
may cause this equipment to function improperly.
POWER REQUIREMENTS
4 7.6HR PRO TREADMILL
Open the boxes:
Open the boxes of your new equipment. Inventory all parts included in the boxes, and Supplied Hardware lists on
pages 5 for a full count of the parts included. If you are missing any parts or have any questions co ntact us directly at
888-800-1167
*Assembly instructions are on pages 18-23.
Gather your tools:
Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit
properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is
free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a
comfortable amount of free area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another
person when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 350LBS (Approx. 160 Kgs). It is
not recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit shown
here. This product is not intended to support users whose weight exceeds this limit.
Care and maintenance:
The safety level can be maintained only if it is examined for damage and wear.
Replace any defective components immediately and stop all use of the equipment until repaired.
Always take care when mounting the equipment. Straddle the equipment by placing your feet on the straddle rails.
Dismount from the equipment only after all parts have stopped.
Always check the wear and tear components like pulley, belts, etc.…To prevent injury.
There is an emergency stop, in the form of a SAFETY KEY, to prevent injury; you can stop the treadmill immediately
b
BEFORE YOU BEGIN
y actuating the emergency stop for emergency dismount.
www.smoothfitness.com
5
SUPPLIED HARDWARE
This list identifies the hardware you will use to assemble the product. To help distinguish between
the various types of screws and bolts, use the scale below to measure them and compare them to
he sizes listed. t
No. Description Qty.
M8 x 45mm Flat Head Bolt
802
806 M6 x 20mm Screw 2
809 M8 x 12mm Allen Head Bolt 4
810 Metal Cap 2
811 M8 x 80 x 25mm Allen Head Bolt 2
4 x 12mm Truss Head Phillips
812
Screw-Cone Point
A 5mm Wrench 1
B Screwdriver 1
C 6mm Allen Wrench 1
6
8
A B
C
802 806 809
810 811 812
MILLIMETERS
6 7.6HR PRO TREADMILL
COMPLETE PARTS LIST
Item No. Description Qty. Part No.
7.6HR PRO-100
101 Overlay 1 7.6HR PRO-101
102 Computer Insert 1 7.6HR PRO-102
103 Console Housing – Upper 1 7.6HR PRO-103
104 Console Support Tube 1 7.6HR PRO-104
105 Safety Key Base 1 7.6HR PRO-105
106 Safety Key 2 7.6HR PRO-106
107 Safety Key Micro Switch 1 7.6HR PRO-107
108 Console Housing – Bottom 1 7.6HR PRO-108
109 Computer PC Board 1 7.6HR PRO-109
110 M6 Blind Nut 2 7.6HR PRO-110
111 Plastic Ring 20x40 1 7.6HR PRO-111
7.6HR PRO-200
112 Console Housing – Bottom Stopper 1 7.6HR PRO-112
201 Front Handlebar 1 7.6HR PRO -201
202 Upright Cross Brace 1 7.6HR PRO-202
203 Handlebar- Left 1 7.6HR PRO-203
204 Handlebar- Right 1 7.6HR PRO-204
205 Upright-Left 1 7.6HR PRO-205
206 Upright-Right 1 7.6HR PRO-206
207 Handlebar Cover-LL 1 7.6HR PRO-207
208 Handlebar Cover-LR 1 7.6HR PRO-208
209 Handlebar Cover-RL 1 7.6HR PRO-209
210 Handlebar Cover-RR 1 7.6HR PRO-210
211 Front Handlebar Foam Grip 260mm 2 7.6HR PRO-211
212 Front Handlebar Foam Grip 310mm 1 7.6HR PRO-212
213 Handlebar Foam Grip 374.5mm 2 7.6HR PRO-213
214 Handlebar End Cap 2 7.6HR PRO-214
215 Hand Pulse Sensor 2 7.6HR PRO - 215
7.6HR PRO-300
216 Hand Pulse Sensor Back Cover 2 7.6HR PRO-216
217 Power Folding Switch Plate Cover 1 7.6HR PRO-217
218 Power Folding Switch 1 7.6HR PRO-218
301 Elevation Support Frame 1 7.6HR PRO-301
302 Elevation Support Tube 2 7.6HR PRO-302
303 Stopper 2 7.6HR PRO-303
304 Diving Tube 1 7.6HR PRO-304
www.smoothfitness.com
Item No. Description Qty. Part No.
7.6HR PRO-400
7.6HR PRO-500
COMPLETE PARTS LIST
305 Base Frame 1 7.6HR PRO-305
306 Fold Up Slipping Rod 2 7.6HR PRO-306
307 Wheel Support 1 7.6HR PRO-307
308 Front Shroud 1 7.6HR PRO-308
309 Elevation Motor Cover Board 1 7.6HR PRO-309
310 Motor Bottom Tray 1 7.6HR PRO-310
311 Base Frame End Cap 4 7.6HR PRO-311
312 Level Adjuster 4 7.6HR PRO-312
313 Wheel 8 x 60 x 30 2 7.6HR PRO-313
314 Wheel 76 x 25 4 7.6HR PRO-314
315 Fold Up Slipping Rod Sleeve 2 7.6HR PRO-315
316 Spring Load Knob 1 7.6HR PRO-316
317 Round Cap 2 7.6HR PRO-317
318 Bearing 6202 2 7.6HR PRO-318
319 Fold Up Position Limiting Rod 1 7.6HR PRO-319
320 Power Switch 1 7.6HR PRO-320
321 Power Plate 1 7.6HR PRO-321
322 Power Breaker 1 7.6HR PRO-322
323 Power Socket 1 7.6HR PRO-323
324 Position Limiter 1 7.6HR PRO-324
325 Elevation Motor 1 7.6HR PRO-325
326 Wire Clip 3 7.6HR PRO-326
327 1/4” Cable Tie 1 7.6HR PRO-327
401 Running Belt 1 7.6HR PRO-401
402 Side Rail – Left 1 7.6HR PRO-402
403 Side Rail – Right 1 7.6HR PRO-403
404 Side Rail End Cap – Left 1 7.6HR PRO-404
405 Side Rail End Cap – Right 1 7.6HR PRO-405
406 Running Deck 1 7.6HR PRO-406
407 Cushion Pad 10 7.6HR PRO-407
501 Motor Hood 1 7.6HR PRO-501
502 Motor Holder 1 7.6HR PRO-502
503 Driving Motor 1 7.6HR PRO-503
504 Driving Belt 1 7.6HR PRO-504
505 Motor Bottom Cover 1 7.6HR PRO-505
506 Rubber Cushion 2 7.6HR PRO-506
7
8 7.6HR PRO TREADMILL
Item No. Description Qty. Part No.
COMPLETE PARTS LIST
507 5/16” Cable Tie 1 7.6HR PRO-507
508 Transformer 1 7.6HR PRO-508
509 Control Board 1 7.6HR PRO-509
510 Elevation Control Board 1 7.6HR PRO-510
7.6HR PRO-600
511 Elevation Control Board Fix Bolt 6 7.6HR PRO-511
601 Elevation Motor Connect Wire 1350mm 1 7.6HR PRO-601
602 8Pin Power Wire-Upper 2100mm 1 7.6HR PRO-602
603 8Pin Power Wire-Lower 1450mm 1 7.6HR PRO-603
604 Receiver 1 7.6HR PRO-604
605 Hand Pulse Sensor Wire 1300mm 2 7.6HR PRO-605
606 3C Power Folding Switch-Lower 1300mm 1 7.6HR PRO-606
607 Safety Key Wire-Upper 2100mm 1 7.6HR PRO-607
608 Safety Key Wire-Lower 650mm 1 7.6HR PRO-608
609 1Pin Power Folding Switch Wire 200mm 1 7.6HR PRO-609
610 6 Pin Control Board Connect Wire 300mm 1 7.6HR PRO-610
611 Power Connect Wire 100mm 3 7.6HR PRO-611
612 3C Power Wire 850mm 1 7.6HR PRO-612
613 Micro Switch Wire 1350mm 1 7.6HR PRO-613
614 3Pin Power Folding Switch Connect Wire 2100mm 1 7.6HR PRO-614
615 Power Folding Switch Wire-Upper 1400mm 1 7.6HR PRO-615
7.6HR PRO-700
616 3C Power Connect Wire 300mm 2 7.6HR PRO-616
701 Lock Pin Guider 1 7.6HR PRO-701
702 Lock Pin Push Rod 1 7.6HR PRO-702
703 Bearing 6203 4 7.6HR PRO-703
704
705
706
707
708
709
710
711
712
713
714
Bearing Base 4 7.6HR PRO-704
Front Roller Shaft 1 7.6HR PRO-705
Front Roller 1 7.6HR PRO-706
Rear Roller 1 7.6HR PRO-707
Rear Roller Shaft 1 7.6HR PRO-708
Micro Switch 3 7.6HR PRO-709
Micro Switch Base 1 7.6HR PRO-710
1/2” Cable Tie 5 7.6HR PRO-711
Spring 1 7.6HR PRO-712
Motor Hood Fixing Bracket 2 7.6HR PRO-713
Fixed Block 8 7.6HR PRO-714
www.smoothfitness.com
Item No. Description Qty. Part No.
COMPLETE PARTS LIST
715 Board Clip 5 7.6HR PRO-715
716 Deck Frame 1 7.6HR PRO-716
717 Running Deck Belly Pan 1 7.6HR PRO-717
718 Roller Pulley 1 7.6HR PRO-718
719 Plastic Cushion 1 7.6HR PRO-719
9
7.6HR PRO-800
720 Running Deck Support Tube 1 7.6HR PRO-720
801 3 x 10mm Round Head Phillips Screw-Cone Point 4 7.6HR PRO-801
802 M8 x 45mm Flat Head Bolt 6 7.6HR PRO-802
803 3 x 12mm Round Head Phillips Screw-Flat Point 2 7.6HR PRO-803
804 M3 x 20mm Round Head Phillips Screw 1 7.6HR PRO-804
805 4 x 12mm Truss Head Phillips Screw-Flat Point 12 7.6HR PRO-805
806 M6 x 20mm Screw 2 7.6HR PRO-806
807 2 x 6mm Round Head Phillips Screw-Cone Point 8 7.6HR PRO-807
808 M5 x 8mm Screw 4 7.6HR PRO-808
809 M8 x 15mm Allen Head Bolt 6 7.6HR PRO-809
810 Metal Cap 2 7.6HR PRO-810
811 M8 x 80 x 25mm Allen Head Bolt 2 7.6HR PRO-811
812 4 x 12mm Truss Head Phillips Screw-Cone Point 8 7.6HR PRO-812
813 12 x 34mm Axle 2 7.6HR PRO-813
814 M14 X 62.5mm Axle 2 7.6HR PRO-814
815 M5 x 20mm Allen Head Bolt 2 7.6HR PRO-815
816 8mm E Clip 2 7.6HR PRO-816
817 Bushing 12 x 20 x 9mm 4 7.6HR PRO-817
818 Bushing 15 x 30 x 6mm 4 7.6HR PRO-818
819 M14 x 55 x 30mm Bolt 2 7.6HR PRO-819
820 M8 x 16mm Round Head Phillips Screw 2 7.6HR PRO-820
821 3 x 12mm Round Head Phillips Screw-Flat Point 2 7.6HR PRO-821
822 M14 x 90mm Bolt 2 7.6HR PRO-822
823 8 x 55mm Axle 2 7.6HR PRO-823
824 6mm C Clip 2 7.6HR PRO-824
825 4 x 16mm Drilling Screw 62 7.6HR PRO-825
826 Wheel Bushing 8 7.6HR PRO-826
827 M10 x 43mm Allen Head Bolt 2 7.6HR PRO-827
828 M10 x 35mm Allen Head Cap Bolt 1 7.6HR PRO-828
829 10 x 16 x 2mm Plastic Washer 1 7.6HR PRO-829
830 6.5 x 13 x 1.5mm Washer 23 7.6HR PRO-830
10 7.6HR PRO TREADMILL
Item No. Description Qty. Part No.
COMPLETE PARTS LIST
831 4 x 19mm Truss Head Phillips screw-Flat Point 4 7.6HR PRO-831
832 M8 x 20mm Flat Head Phillips Screw 10 7.6HR PRO-832
833 8 x 14 x 2mm Plastic Washer 10 7.6HR PRO-833
834 M8 Nut 10 7.6HR PRO-834
835 M10 Nylon Nut 2 7.6HR PRO-835
836 10 x 23 x 2mm Washer 2 7.6HR PRO-836
837 Compression Spring 1 7.6HR PRO-837
838 M10 x 100 x 35mm Bolt 1 7.6HR PRO-838
839 M10 x 118 x 30mm Bolt 1 7.6HR PRO-839
840 M5 x 12mm Drilling Screw 1 7.6HR PRO-840
841 8mm Spring Washer 2 7.6HR PRO-841
842 8 x 16 x 3mm Washer 2 7.6HR PRO-842
843 3 x 12mm Round Head Phillips Screw-Cone Point 4 7.6HR PRO-843
844 4mm Tooth Lock Washer 1 7.6HR PRO-844
845 M8 x 70mm Allen Head Cap Bolt 3 7.6HR PRO-845
846 M3 x 20mm Round Head Phillips Screw 2 7.6HR PRO-846
847 3.5 x 7.8 x 2mm Plastic Washer 6 7.6HR PRO-847
848 3.5mm Tooth Lock Washer 4 7.6HR PRO-848
849 M3 Nut 4 7.6HR PRO-849
850 M5 Nut 5 7.6HR PRO-850
851 M5 x 12mm Round Head Phillips Screw 2 7.6HR PRO-851
852 M10 x 15mm Allen Head Cap Bolt 8 7.6HR PRO-852
853 M10 42mm Bolt 2 7.6HR PRO-853
854 M8 Nylon Nut 2 7.6HR PRO-854
855 M3 x 30mm Round Head Phillips Screw 2 7.6HR PRO-855
856 4 x 25mm Drilling Screw 4 7.6HR PRO-856
857 Round Head Phillips Screw 3 7.6HR PRO-857
858 4 x 20mm Self Tapping Screw 5 7.6HR PRO-858
859 35 x 12 x 1.5mm Washer 6 7.6HR PRO-859
860 Plastic Fixing Insert 6 7.6HR PRO-860
861 M6 x 18mm Screw 2 7.6HR PRO-861
862 5.5 x 12 x 1.5 mm Washer 1 7.6HR PRO-862
863 M5 x 12mm Allen Head Bolt 1 7.6HR PRO-863
MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED
PARTS DIAGRAM
www.smoothfitness.com
11
101
802
801
801
825
111
105
106
102
803
103
107
104
804
109
807
110
807
802
805
108
805
805
806
805
112
805
Loading...