Declaration of conformity................................................................ 38
2 - English
Wireless Optical Mouse OM1008
Important Safety Instructions
Before you use this device for the first time, please read the
following notes in this manual and heed all warnings, even if you
are familiar with handling electronic devices. Keep this manual safe
for future reference. If you sell the device or pass it on, it is
essential you hand over this manual also.
This icon denotes important information for the safe
operation of the product and for the user’s safety.
Avoid harm to the eyes! Never look into the LED beam. Never point
the LED beam directly at people or animals!
Intended Use
This mouse, consisting of a wireless mouse and wireless receiver,
is an IT device. The device may not be used outdoors or in tropical
climates. This product has not been designed for corporate or
commercial (e.g. office) applications. Use the product in domestic
environments for private applications only. Only connection cables
and external devices may be used that comply with safety
standards and the electromagnetic compatibility and shielding
quality of this device. This device fulfils all that relates to CE
This icon alerts about a strong light source.
This symbol denotes further information on the topic.
Warning: LED Radiation! LED Class 1
English - 3
Wireless Optical Mouse OM1008
Conformity, relevant norms and standards. Any modifications to the
equipment other than recommended changes by the manufacturer
may result in these directives no longer being met. The
manufacturer is not liable for any damage or interference caused by
unauthorized modifications. Only use the accessories
recommended by the manufacturer. Any use other than that
mentioned above does not correspond to the intended use.
If you are not using the device within the Republic of Germany, you
must observe the regulations and laws in the country of use.
Operating Environment
Position the wireless mouse on a stable, even surface and do not
place any objects on the device. The device is not for use in
environments with a high temperature or humidity (e.g. bathrooms),
and must be kept free of dust. Operating temperature and operating
humidity: 5°C to 40°C, max. 90% RH.
Always make sure that:
- no direct heat sources (e.g. heating) can affect the device;
- no direct sunlight or artificial light reaches the device;
- contact with spray, dripping water and corrosive liquids must be
avoided and the device should never be operated near water,
and it must especially never be immersed (do not place any
objects filled with liquids such as vases or drinks near the
device);
- the device is never placed in the immediate vicinity of magnetic
fields (e.g. loudspeakers);
- no fire sources (e.g. burning candles) are placed on or near the
device;
- no foreign bodies are introduced into the device;
- the device should not be subject to any sharp temperature
changes;
- the device is not subject to excessive shocks and vibrations;
4 - English
Wireless Optical Mouse OM1008
Children and Persons with Disabilities
Electrical appliances do not belong in the hands of children. Also
people with disabilities shall use electrical devices accordingly. Do
not allow children or persons with disabilities to use electrical
devices when not under supervision. These people may not
comprehend the presence of potential risks. Batteries and small
parts represent potential choking hazards. Keep the batteries out of
reach. If a battery is swallowed, seek medical help immediately.
Keep the packaging away from children and persons with
disabilities too. as there is danger of suffocation.
Batteries
Insert the battery with the correct polarity. Never try to recharge any
normal batteries and under no circumstances throw them into fire.
Remove the battery when the device is not to be used for a long
time. Non-intended use may cause explosion and danger to life.
English - 5
Wireless Optical Mouse OM1008
R/F Interface
Please switch off the appliance in airplanes, hospitals, operating
theatres and in the vicinity of medical electronic system. The radio
waves transmitted could impair the functionality of sensitive
appliances.
Observe a minimum distance of 20 cm between the appliance and
any pacemaker as the radio waves could impair the function of the
pacemaker.
The transmitted radio waves may create interference noises in
hearing aids.
Do not allow the appliance to be introduced in the vicinity of
inflammable gases or in environments subject to a risk of explosion
(e.g. paint shops) as long as the radio component is switched on,
because the transmitted radio waves could trigger an explosion or
fire.
The coverage/range of the radio waves varies depending on the
surrounding and environmental conditions.
In any data exchange via wireless connections, unauthorized third
parties are also able to receive the data. Targa GmbH is not liable
for any radio or television interference caused by unauthorized
modifications of this appliance. Targa furthermore accepts no
liability for the replacement or exchange of connection cables and
appliances not specified by Targa GmbH. The user is solely
responsible for the elimination of interferences caused by such an
unauthorized modification, as well as for the replacement or
exchange of the appliances concerned.
6 - English
Wireless Optical Mouse OM1008
Repair and Maintenance
Repairs are required when this device has been damaged in any
way, for example, when liquid has entered the product, when the
product has been exposed to rain or moisture, when the product
does not work normally or if the product has been dropped. If
smoke, unusual noises or smells are noticed, power off the device
immediately. In this case the device should not be used further and
should be inspected by authorized service personnel. Please
contact qualified personnel when repair is needed. Never open the
housing of the device, or the accessories. Only use a clean, dry
cloth for cleaning. Never use any corrosive liquids.
Copyright
The entire content of this User’s Manual is copyrighted and is
provided to the reader for information purposes only.
Copying data and information without the prior written and explicit
authorization from the author is strictly forbidden. This also applies
to any commercial use of the contents and information.
All texts and figures are up-to-date as per the date of print release.
We assume no liability for any changes.
English - 7
Wireless Optical Mouse OM1008
Conformity Notice
The wireless mouse has been tested and approved
for compliance with the basic and other relevant
requirements of the R&TTE Directive 1999/5/EC. The
corresponding Declaration of Conformity can be found
at the end of this User's Manual.
Disposal of Old Devices
Devices marked with this symbol are subject to the
European Directive 2002/96/EC. All electric and
electronic devices must be disposed of separately
from household waste at established bodies. Avoid
hazards to the environment and dangers to your
personal health by disposing of the device properly.
For further information about proper disposal, contact
your local government, disposal bodies or the shop
where you bought the device.
Respect the environment. Old batteries do not belong in with
domestic waste. They must be handed in to a collection point for old
batteries.
Also recycle the packaging material properly. Cardboard packaging
can be taken to paper recycling containers or public collection
points for recycling. Any films or plastic contained in the packaging
should be taken to your public collection points.
8 - English
Wireless Optical Mouse OM1008
Package Contents
Please check the completeness of package contents using the
following list:
- Wireless optical mouse
- Miniature USB receiver
- 1 type AA battery, 1,5V (Mignon)
- Driver CD
- User manual
If you find any items missing or damaged, please phone our hotline.
You will find the corresponding phone number in the last chapter
“Warranty Information”.
System Requirements
- Intel® Pentium® III / AMD Athlon™ or higher
- 1 free USB port
- Microsoft
Windows Vista
- CD-ROM drive or DVD drive for installing the software
®
Windows® 2000 Professional, Windows® XP,
®
or Windows® 7
Introduction
Thank you for purchasing the wireless mouse SilverCrest OM1008.
Besides the 3 standard buttons, this optical wireless mouse is
equipped with five special buttons for easier access to frequently
used functions. The scrolling wheel is a tilt wheel enabling you to
scroll in horizontal as well as vertical directions. The special CPI
button (1) puts you in a position to toggle between the optical
resolutions of 500 cpi and 1000 cpi or between standard and media
operation.
English - 9
Wireless Optical Mouse OM1008
Hardware Installation
Inserting the Batteries
Please insert the included AA type battery in the wireless mouse,
taking care that the + and – poles point in the required direction,
and switch on the mouse using the On/Off (11) switch on the
bottom.
11 On/Off switch
12 Optical sensor
13 Battery
compartment
The control lamp (5) on the top of the wireless mouse lights up if the
battery power runs low. If this happens, please replace the battery
with a new, 1,5 V AA batteries (Mignon).
Should the wireless mouse fail to work, power it off
and back on. Sometimes removing and re-inserting
the batteries will also help.
After inserting the batteries into the mouse, the
indicator (5) will flash several times during automatic
synchronisation with the receiver. When the
synchronisation is completed, the status indicator will
stop lighting.
10 - English
Wireless Optical Mouse OM1008
Connecting the USB Receiver
Connect the miniature USB receiver (10) to a free USB port of your
running computer.
The operating system will automatically recognize the new
hardware and install the required drivers. Depending on the
operating system installed, the following screen messages may
appear:
Windows
®
2000/XP
When the receiver is connected for the first time, the operating
system Windows
®
2000/XP displays the message „New hardware
detected“. Wait until the message „The new hardware has been
installed and is now ready for use“ is displayed before using your
mouse.
®
Windows Vista
, Windows® 7
When the receiver is connected for the first time, the operating
system Windows Vista™ displays the message „Installation of
appliance driver software“. Wait until the message „The
appliances are ready for use now“ appears. The mouse is now
operational and ready to be used.
If your previous mouse is still connected to the computer, please
shut down the computer, disconnect the appliance and then restart
the computer.
Software Installation
If you would like to use all of the functions of your wireless mouse
you need to install the software included. Insert the included CDROM in the CD-ROM drive of your computer. The installation
process should start automatically, failing that, start the CD-ROM
file "setup.exe" manually by double-clicking it.
Only with the operating system Windows Vista™ will the installation
initially be stopped by the user account control function with the
message: „An unidentified program is attempting to access the
computer”. Click on „OK“ to continue with the installation.
English - 11
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.