SilentKnight FFT-FPJ User Manual

Contact EOL is set to connecte d
See Figure 2 for EOL Example

FFT-FPJ Installation
Instructions

The following instructions are a quick
reference guide, for more information refer
to the IFP-FFT installation manual PN
54708 or the SK-FFT installation manual PN

54711.

Figure 1: FFT to FFT-FPJ connection

FFT-FPJ Remote Phone Jack

FFT-RHS Fire Fighter’s Remote Hand Set

Mounting

The FFT-FPJ Fire Fighter’s Phone Jack
mounts to a single-gang electrical box
(4 x 2-1/8 x 2-1/2), or when the addressable
mini-monitor module is installed with it, a
deep single-gang electrical box
(4" x 2-1/8” x 3-1/4”).

All circuits are power-limited and
supervised.

Figure 2: EOL Example

FFT-FPJ Operation

To make a call to the main panel, insert the
remote handset plug into the FFT-FPJ phone
jack.

When call is complete, remove the remote
handset from the jack

P/N 54418 Rev A

ECN 11-0003