SilentKnight FFT-24 Installation

Mounting

Studs

Mounting

Studs

FFT-24 Installation
Instructions

The FFT-24 expander board lets you add 24
additional zones to the Fire Fighter Telephone.

Compatibility

The FFT-24 is compatible with Silent Knight
FFT series Fire Fighters Telephone. For more
information refer to the IFP-FFT installation
manual 54708 or the SK-FFT installation
manual 54711.

Mounting

1. Open Cabinet door and dead front panel.

2. Remove power from compatible powering
device.

3. Remove existing cover plate.

4. Mount the FFT-24 on the six mounting studs
located on the inside of the dead front panel
and secure using the nuts provided with the
FFT-24.

Wiring

1. Connect one end of the wiring harness (P/N
130398 supplied) to the FFT and the other
end to the FFT-24 as shown in Figure 2.

Figure 2: Wire Harness connection

2. Restore Power.

Figure 1: Mounting Location for the FFT-24

P/N 54421 Rev A

ECN 11-0003