With the Gigaset HC450, the door intercom becomes an integral component of
the cordless telephone system. It supports
two-way speech using any registered
cordless telephone which means that the
house telephone no longer has to be permanently located in the entrance area.
The Gigaset HC450 door intercom is suitable for practically all single-family residences, including those that only have
abell.
Main features
u Two-way speech with callers to the
door using the cordless telephone –
including handsfree
u Intuitive operation via the handset's
softkeys (open door, activate entry
light)
u Easy configuration using the menu on
the handset
u Forwarding to external numbers
u Ease of installation and registration
with the Gigaset system
u Replacement of the old bell button
with the door intercom – the existing
cabling is generally adequate for
installation
u Support for existing bell and standard
door openers
u Configuration options for the second
bell key (separate door call to specific
handset, activation of entry lighting,
same function as first bell key)
Gigaset Home Control
"Gigaset Home Control" is a standard that
allows you to control
u household appliances
u lights and blinds
u alarm systems
u heating and air conditioning systems
and
u door intercoms such as the
Gigaset HC450
from a Gigaset cordless telephone.
The full functionality of the HC450 door
intercom (opening the door from the
handset, forwarding calls to an external
number and configuring the system) is
available in conjunction with Gigaset cordless telephones that support "Gigaset
Home Control". A list of all compatible
devices can be found in the appendix and
on the Internet at
www.gigaset.com/customercare
If you are operating the door intercom
with a standard DECT handset that is not
fully compatible and only supports the
GAP standard, only the "intercom" function is possible.
(GDECT / GAP is the transmission protocol
for cordless phones. This allows handsets
of one manufacturer to be operated on
the base station of a different manufacturer. In this case, however, operation is
restricted to the telephones' basic functions.)
.
1
Brief overview
In common with the HC450 door intercom, all other products certified for
"Gigaset Home Control" can be easily
installed without additional cables and
networked with the Gigaset cordless telephone at the push of a button.
"Gigaset Home Control" thus grows with
your needs.
All compatible devices feature the "Gigaset Home
Control" logo, making them
very easy to identify.
You will find more detailed and up-to-date
information together with sources of supply for compatible products on the Internet at the following link:
www.gigaset-home-control.com
Range of applications
Assigning the two doorbell keys
The HC450 door intercom has two doorbell keys, each of which can be assigned
different settings.
Call diversion
If call diversion is activated for the door
intercom, the door call will then be
diverted to the external number. The call
diversion relates to the top doorbell key.
The call diversion can be controlled in different ways: If the occupier is at home he/
she sets "Status: Home", which means that
the internal handset will be called first. If
no-one answers, the call will then be
diverted. If "Status: Away" is set, the door
call will immediately be forwarded to an
external number.
Example:
In the Smith family's house, handset no. 1
rings when the top doorbell key labelled
"Smith family" is pressed. Handset no. 2
belonging to the son will only ring when
the bottom doorbell key labelled "Matthew Smith" is pressed. The Smith family
has activated call diversion. If no-one from
the family is at home, then the call will be
forwarded to the father's mobile phone.
Top doorbell key:
The top doorbell key activates a connected
external bell. At the same time, an internal
call is initiated to a specific or to all handsets.
Bottom doorbell key:
u The bottom doorbell key can initiate
another internal call (other handset or
other ringer tone) in addition to the
external bell.
u Its function can also be set identically
to the top key or
u The entry lighting can be activated
when the key is pressed. This requires
the lighting system to be connected to
the HC450 control unit. If the bottom
doorbell key is being used as a
"lights key", it cannot function
as a "doorbell key".
2
Brief overview
Door opener, bell and entry lighting
The following devices, which are not
among the items supplied, can be connected to the HC450 and operated:
Door opener:
The door can be opened from
the Gigaset handset or, in the
case of a forwarded call, from
a remote location. To do this, a
standard door opener must be
connected (not supplied). The
voltage pulse (12 V alternating
voltage) for opening the door
is supplied by the HC450.
Bell:An existing bell will be con-
nected to the HC450.
Before
Doorbell
Bell
After
Control unit
Pushbutton
Light
Door light:
A light circuit (e.g. the entry
lighting) can be switched on
from the handset and if applicable via the bottom bell key
for between 1 and 90 seconds
or also operated in pulse mode.
The connection to the floating
contact (230 V, 10 A) must be
undertaken by a qualified electrician.
The illustration below shows the cabling
with an existing doorbell (before) and the
cabling following installation of the
HC450 door intercom and HC450 control
unit (after).
Read the safety precautions and the manual before use.
Explain their contents to your children as well as the potential hazards associated with using the
telephone.
u Only use the mains adapter supplied, as indicated on the underside of the control unit.
This adapter is only intended for use on the Gigaset HC450 and must not be connected to other devices.
Make sure that the mains adapter is accessible at all times.
Do not continue to use broken plugs or plug-in power supply units with broken housings as they pose a risk of electric shock. Have these parts replaced with genuine spare
parts without delay.
u The housing of the HC450 control unit and door intercom must not be opened. Unau-
thorised opening of the housing and improper repairs may endanger the user and will
invalidate the warranty.
u The control unit is designed for indoor operation only. Lay the cables so that nobody
can walk on or trip over them.
u The control unit includes a radio module in accordance with the DECT standard. The
operation of medical appliances may be affected. Be aware of the technical conditions
in your respective environment, e.g. doctor's surgery.
u The module must not be installed during a thunderstorm, nor should any cable connec-
tions be plugged in or unplugged, as to do so would expose you to the risk of electric
shock.
u Do not allow flui ds to penetr ate th e HC45 0 cont rol un it and door inte rcom as this c ould
result in electric shocks or short circuits.
u Do not use your telephone in environments with a potential explosion hazard, e.g. auto
paint shops.
u If you give your Gigaset HC450 door intercom to someone else, make sure you also give
them the manual.
u The entry light may only be installed by a qualified electrician. Please observe the
respective national regulations for the installation of electrical and telecommunications systems.
u Only equipment supplying safety extra-low voltage (SELV) and complying with
EN 60950 may be connected to the control unit (actuator output).
5
Safety precautions
All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is covered by the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will help prevent potential negative consequences for the environment and human health.
It is a precondition for reuse and recycling of used electrical and electronic
equipment.
For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the
product.
Note:
Not all of the functions described in this manual are available in all countries.
6
Installing the Gigaset HC450 door intercom system
Installing the
Gigaset HC450 door
intercom system
Installation of the HC450 door intercom
system does not require additional cables
to be laid if a doorbell with sound effect is
already present. You replace the existing
doorbell key in this case.
Begin by checking that you have all the
components required for mounting.
Please read the entire chapter on installation carefully before you commence.
Pack contents
u 1 control unit with cover
u 4 plugs and mounting screws for fixing
the control unit and door intercom
u 1 HC450 door intercom
u 1 frame for surface mounting
u 1 plug-in power supply unit
u 2 hexagon socket screws for fixing the
door intercom to the frame
u 1 Allen key for the hexagon socket
screws
u 2 clamping plugs for connecting the
cables to the door intercom
u 2 doorbell key covers and nameplates
u 2 thermal shrinkage tubes
Mounting the HC450
door intercom
The HC450 door intercom generally
replaces the existing doorbell. It is suitable
for mounting outdoors and features
weatherproof protection.
Loudspeaker
Top ke y
Bottom key
Microphone
u Make sure that there are no power sup-
ply lines, cables or the like near the
mounting location.
u Select the attachment and mounting
location so that there is a minimum dis-
tance of 10 cm between the micro-
phone and the closest wall surface.
min. 10 cm
min. 10 cm
7
Installing the Gigaset HC450 door intercom system
Surface mounting
u Remove the bell button if there is one
and unscrew the cables. Fit the frame
over the cable outlet. Next screw one of
the enclosed green clamping plugs to
the existing 2-core bell cable (polarity is
not relevant here) and insert it in the
jack with the ETS symbol (green jack).
Caution:
If you are using the existing bell cable, the
doorbell system must be set to zero potential
prior to installation.
Caution:
Cables must not be connected or disconnected
during a thunderstorm.
u Hang the door intercom at the top of
the frame (45 degree angle, see illustration on right) and lower it against
the wall. Fix the door intercom using
the two enclosed hexagon socket
screws.
8
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.