Siemens GIGASET DA510 Operating Manual
Gi
DA
/
IM/A
M
R
W/DA
f
/
Gigaset DA510 overview
5
3
4
6
7
1
2
8
Keys
1 Programmable direct dial keys
2 Insert strip for writing the assign-
ment of programmable direct
dial keys
3Shift key
4Set key
5Redial/Pause key
6Recall key
7Mute key
8Volume / Direct call key
Key for setting the volume of
handset and ring tone, and for
direct calling
1
en
LED
G Volume / Direct call key
¤ flashes on incoming call,
¤ lights up when you pick up the
handset if direct calling is activated,
¤ indicates when the keylock is
activated (rapid double-flash)
Gi
DA
/
IM/A
M
R
W/DA
f
/
Connecting the telephone
Wall mounting
¤ Drill two dowel holes into the wall
at a distance of 99.4 mm and fix
two screws.
¤ Lift out the handset bracket (5)
with a screwdriver and clip it into
the handset cradle (6).
¤ Hang the telephone on the pro-
jecting screw heads.
¤ Connect the handset to the
telephone using the coiled
cable (4).
4
1
5
2
3
¤ Connect the telephone connector (1) to
the main phone socket using the supplied telephone cable.
¤ Guide the cable through the
cable channel of the handset cradle: upwards for
operating the phone on the
table (2); downwards when
mounting the phone on the
wall (3).
6
2
en
Please note
Once you have installed your Gigaset, lift the handset for approx. 5 seconds
to m ake s ure i t is wo rki ng pro perl y. You sh ould also do th is af ter a power fail ure in the telephone network. In the event of a power failure, your settings
will not be lost.
en
Gi
DA
/
IM/A
M
R
W/DA
f
/
3
Safety precautions
When installing, connecting and
operating the telephone, always
observe the following precautions:
u Only use the jacks and leads sup-
plied.
u Only connect the connecting
lead to the intended socket.
u Only connect approved accesso-
ries.
u Lay the connecting lead where it
will not cause accidents.
u Position the telephone on a non-
slip surface.
u For your safety and protection,
the telephone may not be used
in the bath or shower rooms (wet
locations). The telephone is not
splash proof.
u Never expose the telephone to
sources of heat, direct sunlight or
other electrical devices.
u Protect your telephone from
moisture, dust, corrosive liquids
and vapours.
u Never open up the telephone
yourself.
u Do not touch the plug contact
with pointed or metallic objects.
u Do not carry the telephone by
the leads.
u If you give your telephone to
someone else, make sure you
also give them the operating
manual. Your Gigaset DA510 has
a permanent memory, so you
may want to delete any stored
numbers before passing it on.
Setting up the telephone for use
Recommended installation of telephone:
u Do not expose the telephone to
direct sunlight or other sources
of heat.
u Operate at temperatures of
between +5°C and + 40°C.
u Maintain a distance of at least
one metre between the telephone and radio equipment, e.g.
radio telephones, radio paging
equipment or TV sets.
Otherwise, telephone communication could be impaired.
u Do not install the telephone in
dusty rooms as this can limit the
service life of the telephone.
u Furniture lacquer and polish can
be adversely affected by contact
with parts of the unit (e.g. feet).
Dialling and saving numbers
Dialling a number
c~ Lift the handset, dial
Last number redial
The last number dialled is automatically saved (max. 32 digits).
cI Lift the handset, press
the number.
the last number redial
key.
en
Gi
DA
/
IM/A
M
R
W/DA
f
/
4
Programmable direct dial keys
You can save 20 phone numbers on
10 programmable direct dial keys
(each key can take two numbers,
each with up to 32 digits).
Note: You can also use the programmable direct dial keys as function
keys for network services
£ page 8).
(
Storing a number
c K Lift the handset, press
Either
B Press a direct dial key
or
L B Press the shift key and
~ Enter the phone
You can now store further numbers
by pressing the programmable
direct dial key, or the shift key and
programmable direct dial key, and
repeating the process.
K & Press the set key, hang
During a call
You can also save the number of the
person you are talking to during a
call:
K B Press the set key, press
~ Enter the phone
the set key.
(for the first 10 numbers)
a direct dial key (for a
further 10 numbers).
number.
up the handset.
a direct dial key.
number.
K Press the set key.
Dialling a number
c B Lift the handset, press
a programmable direct
dial key.
or
c L B
You can extend the dialled number
by entering additional digits.
Lift the handset, press
the shift key and one of
the programmable
direct dial keys.
Deleting a number
c K Lift the handset, press
B Press the relevant pro-
the set key.
grammable direct dial
key either on its own or
L B with the shift key.
K & Press the set key, hang
For how to delete the contents of all
programmable direct dial keys,
£ page 9.
up the handset.
Notes
When storing and deleting programmable direct dial numbers, please
note the following:
* and # are saved regard-
u
less of the set dialling mode but
are only dialled with tone dialling mode (
u If the number entered is longer
than 32 digits, only the first 32
digits are stored.
£ page 7).
Dialling pauses
One or more dialling pauses can be
entered using
Pauses are transferred to the memory and are necessary for certain
extension systems (e.g. 0
The length of the pause can be set to
1, 3 or 6 seconds (
I (not at 1st digit).
I 2368).
£ page 9).
Loading...