Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
XL-UH2080H Micro component system consisting of XL-UH2080H (main unit)
and CP-UH2080H (speaker system).
XL-UH2080H
OPERATION MANUAL
Note:
This product is not compatible with MTP and AAC file systems.
IO
DUAIN
SHARP CORPORATION
XL-UH2080H
Special notes
WARNINGS
z When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit. When the ON/
STAND- BY button is set at STAND-BY position, the unit may be
brought into operation by the timer mode or remote control.
z This unit contains no user serviceable parts. Never remove covers
unless qualified to do so. This unit contains dangerous voltages,
always remove mains plug from the socket before any service
operation and when not in use for a long period.
z To prevent fire or shock hazard, do not expose this appliance to
dripping or splashing. No objects filled with liquids, such as vases,
shall be placed on the apparatus.
z Do not turn the volume on to full at switch on and listen to music
at moderate levels. Excessive sound pressure from earphones
and headphones can cause hearing loss.
Note for users in Australia:
Copyright may exist in material you wish to record. Copying or
broadcasting such material without permission of the relevant
licensees or owners of the copyright is prohibited by law. SHARP is
not in a position to authorise the copying or broadcasting of copyright
materials and nothing in this OPERATION MANUAL should be
implied as giving that authority.
For other countries:
Audio-visual material may consist of copyrighted works which must
General Information
not be recorded without the authority of the owner of the copyright.
Please refer to the relevant laws in your country.
CAUTIONS
z This product is classified as a CLASS 1 LASER product.
z This unit contains a low power laser device. To ensure continued
safety do not remove any cover or attempt to gain access to the
inside of the product. Refer all servicing to qualified personnel.
2
Special Note
Supply of this product does not convey a license nor imply any right
to distribute content created with this product in revenue-generating
broadcast systems (terrestrial, satellite, cable and/or other
distribution channels), revenue-generating streaming applications
(via Internet, intranets and/or other networks), other revenuegenerating content distribution systems (pay-audio or audio-ondemand applications and the like) or on revenue-generating physical
media (compact discs, digital versatile discs, semiconductor chips,
hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
Accessories
Please confirm that only the following accessories are included.
z Please ensure that the equipment is positioned in a well-ventilated
area and ensure that there is at least 10 cm (4") of free space
along the sides, top and back of the equipment.
10 cm (4")
z Use the unit on a firm, level surface free from
vibration.
z Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical
equipment (home computers, facsimiles,
etc.) which generate electrical noise.
z Do not place anything on top of the unit.
General Information
z Do not expose the unit to moisture, to temperatures higher than
60
°C (140°F) or to extremely low temperatures.
z If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
z In case of an electrical storm, unplug the
unit for safety.
10 cm (4")
10 cm (4")
10 cm
z Hold the AC power plug by the head when
removing it from the wall socket, as pulling
the lead can damage internal wires.
z The AC power plug is used as a disconnect
device and shall always remain readily
operable.
z Do not remove the outer cover, as
this may result in electric shock.
Refer service to your local SHARP
service facility.
z The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.
z No naked flame sources, such as lighted candles, should be
placed on the apparatus.
z Attention should be drawn to the environmental aspects of battery
disposal.
z This unit should only be used within the range of 5°C - 35°C
(41°F - 95°F).
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible for
any damage resulting from use of this unit with a voltage other than
that which is specified.
Volume control
The sound level at a given volume setting depends on speaker
efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on. Listen to music at moderate levels. Excessive sound
pressure from earphones and headphones can cause hearing loss.
Make sure to unplug the AC power lead before making any connections
Aerial connection (see page 9)
Right speaker
Preparation for Use
Speaker connection (see page 9)
FM aerial
AM loop aerial
Left speaker
Wall socket
(AC 220 - 240V ~ 50Hz)
AC power connection (see page 10)
8
XL-UH2080H
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM and GND (Earth) terminals.
Position the AM loop aerial for optimum reception. Place the AM loop
aerial on
supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >< Attaching to the wall >
a shelf, etc., or attach it to a stand or a wall with screws (not
Speaker connection
Connect the black wire to the minus (–) terminal, and the red wire to
the plus (+) terminal.
RedBlack
Caution:
z Use speakers with an impedance of 4 ohms or more, as lower
impedance speakers can damage the unit.
z Do not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
z Do not let the bare speaker wires touch
each other.
z Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
z Do not stand or sit on the speakers. You may
be injured.
Incorrect
Preparation for Use
Wall Screws (not supplied)
9
XL-UH2080H
System connections (continued)
AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
Wall socket
(AC 220 - 240V ~ 50Hz)
Note:
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power
Preparation for Use
stand-by mode (demonstration
mode), press the X-BASS/DEMO
button on the remote control. The
unit will enter the low power
consumption mode.
External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
External FM
aerial
75 ohms
coaxial cable
Note:
When an external FM aerial is used, disconnect the supplied FM
aerial wire.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the
X-BASS/DEMO button on the remote control again.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
10
Remote control
XL-UH2080H
Battery installation
1 Open the battery cover.
2 Insert the supplied batteries according to the direction
indicated in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
3 Close the cover.
Precautions for battery use:
z Replace all old batteries with new ones at the same time.
z Do not mix old and new batteries.
z Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
Caution:
z Do not use rechargeable batteries (nickel-cadmium battery, etc.).
z Installing the batteries incorrectly may cause the unit to
malfunction.
z Batteries (battery pack or batteries installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
Battery removal:
Open the battery cover and pull up the battery to take out.
Notes concerning use:
z Replace the batteries if the operating distance is reduced or if the
z Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
z Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
z Keep the remote control away from moisture, heat, shock, and
vibrations.
Test of the remote control
Check the remote control after checking all the connections (see
pages 8 - 10).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy the music.
Remote sensor
0.2 m - 6 m
(8" - 20’)
Preparation for Use
11
XL-UH2080H
General control
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Basic Operation
Press the ON/STAND-BY button to enter the power stand-by mode.
Illumination light control
When the unit’s power is turned on, the ring around the volume
control lights up. To turn on/off the light, hold down the
CLEAR/DIMMER button on the remote control for more than 2
seconds.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or –) button to increase or decrease the volume.
.....
30 MAXIMUM0
Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and “X-BASS” will
appear. To cancel the extra
button on the remote control
bass mode, press the X-BASS/DEMO
.
Equaliser
When the EQUALIZER MODE button is pressed, the current mode
setting will be displayed. To change to a different mode, press the
EQUALIZER MODE button repeatedly until the desired sound mode
appears.
FLAT
ROCK
CLASSIC
POPS
VOCA L
JAZZ
Equaliser off
For rock music
For classical music
For pop music
Vocals are enhanced
For jazz
12
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.