Sharp XL-T300H User Manual

XL-T300H

COMP ACT AUDIO SYSTEM

Accessories

1

1

This Quick Guide will help you to correctly
install and operate your system.

If you require any advice or assistance
regarding your Sharp product, please
visit our web-site www.sharp.co.uk/
support.
Customers without internet access may
telephone [phone] during office
hours (or [phone] if telephoning
from Ireland).

AM loop aerial × 1AC power lead × 1 Remote control × 1

FM aerial × 1

2

Battery installation of remote control

2

Use 2 “AAA” size batteries (UM-4, R03, HP-16 or similar).
Batteries are not included.

Remove the Insert the batteries Replace the cover.

123

battery cover. as shown.

*XL_T300_QG 02.1.29, 10:49 AM1

– 1 –

Speaker wire × 2

TINSE0083SJZZ A0201.TO

System Connections

3

3

MD recorder

FM aerial

TV

AM loop aerial

Right speaker

To the optical line
input socket

Connection cable
for digital recording

(not supplied)

(CD only)

VCR, DVD, etc.

To the line
output sockets

RCA lead

(not supplied)

Wall socket
(AC 230 V, 50 Hz)

Left
speaker

Headphones

*XL_T300_QG 02.1.29, 10:49 AM2

Right speaker

White line

Black

– 2 –

Left speaker

Turn on your System

4

4

Press the ON/STAND-BY button to turn the power on.

Listening to a CD

1

2
3

4
5

Listening to the Radio

1

2

FM stereo mode indicator

3

FM stereo receiving indicator

Press the FUNCTION button
until “CD STOP” appears on
the display.

If no disc is loaded, the display will
be “NO DISC” instead of “CD STOP”.

Press the
button to open the CD/Cas­sette compartment.

Place a CD on the spindle,
label side up.

Press the
button to close the CD/Cas­sette compartment.

Press the
playback from track 1.

Press the FUNCTION button
until “FM” or “AM” appears
on the display.

Press the TUNING (
button to tune in to the de­sired station.

When the TUNING button is pressed
for more than 0.5 seconds, scanning
will start automatically and the tuner
will stop at the first receivable broad­cast station.

T o receive an FM stereo trans­mission:
Press the FUNCTION button
to display the “ST” indicator.

“j” will appear when an FM
broadcast is in stereo.

77

7 OPEN/CLOSE

77

77

7 OPEN/CLOSE

77

0606

06 button to start

0606

XX

WW

X or

W)

XX

WW

*XL_T300_QG 02.1.29, 10:49 AM3

– 3 –

Listening to a Cassette Tape

1
2

3
4

5

Press the FUNCTION button
until “TAPE” appears on the
display.

Press the
button to open the CD/Cas­sette compartment.

Load a cassette into the cas­sette compartment with the
side to be played facing up.

Press the
button to close the CD/Cas­sette compartment.

Press the
playback.

77

7 OPEN/CLOSE

77

77

7 OPEN/CLOSE

77

0606

06 button to start

0606

■ If trouble occurs

When this product is subjected to strong external interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may mal­function.

If such a problem occurs, do the following:

1.

Set the unit to the stand-by mode and turn the power on again.

2. If the unit is not restored in step 1, unplug and plug in the

unit, and then turn the power on.

3. If neither step 1 nor 2 restores the unit, do the following:

1 Press the ON/STAND-BY button to enter the power stand-by

mode.

2 Unplug the AC power lead from the AC INPUT socket on the

unit.

3 Whilst pressing down the VOLUME X button and the

button, plug the AC power lead into the AC INPUT socket on the unit.

Caution:

This operation will erase all data stored in memory including clock, timer settings, tuner preset, and
CD programmed.

■

Maintenance

44

4

44

Cleaning the CD pickup lens

Do not touch the laser pickup lens. If fingerprints or dust accumulate
on the pickup, clean it gently with a dry cotton swab.

Cleaning the tape-handling parts

• Dirty heads, capstan or pinch roller can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.

• When cleaning the heads, pinch roller, etc., unplug the unit which
contains high voltages.

A Erase head C Capstan
B Recording/Playback head D Pinch roller

• After long use, the deck’s heads and capstan may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser’s instructions carefully before use.

AC INPUT

A

B

C

D

*XL_T300_QG 02.1.29, 10:49 AM4

– 4 –