Sharp XLMP35H User Manual

MODEL

XL-MP35H

MICRO COMPONENT SYSTEM

This Quick Start Guide will help you to correctly install and oper­ate your system.

If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or [phone]
if telephoning from Ireland).

2

Remote control battery installation

0301

1

Accessories

Remote control × 1

AC power lead × 1

3

System connections

FM/AM loop aerial × 1

FM aerial

Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.

1 Remove the battery cover.

2 Insert the batteries as shown.

3 Replace the cover.

TV

AM loop aerial

Right speaker

Wall socket
(AC 230 V, 50 Hz)

Right speaker

Left speaker

Left speaker

White line
Plain

VCR, DVD, etc.

To the line
output sockets

RCA lead

(not supplied)

4

Turning on your system

Press the ON/STAND-BY button to turn
the power on.

XL-MP35HE_QG.pm 03.9.2, 1:46 PM1

TINSE0145SJZZ
03J N HK 1

Listening to a CD or MP3 disc

PUSH
CLOSE

Listening to a cassette tape

1 Press the FUNCTION button until “CD” appears on the dis-

play.

2 Press the CD EJECT button to open the disc compart-

ment.

3 Place a disc on the spindle, label side up.

4 Close the disc compartment by firmly pushing the corner

marked “PUSH CLOSE”.

5 Press the button to start playback from track 1.

Listening to the radio

1 Press the FUNCTION button until “TAPE” appears on the

display.

2 Open the cassette compartment by pushing the area marked

“PUSH EJECT ”.

3 Load a cassette into the cassette com-

partment with the side to be played
facing toward you.

4 Close the cassette compartment by pushing the area marked

“PUSH EJECT ”.

5 Press the button to start playback.

■

If trouble occurs

When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.

If such a problem occurs, do the following:

1. Set the unit to the stand-by mode and turn the power on
again.

2. If the unit is not restored in the previous operation, un­plug and plug in the unit, and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory
by resetting it.

1 Press the FUNCTION button until “FM” or “AM” appears on

the display.

2 Press the TUNING ( or ) button to tune in to the desired

station.
When the TUNING button is pressed for more than 0.5 sec­onds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.

To receive an FM stereo transmission:

Press the FUNCTION button to display the “ST” indicator.

” will appear when an FM broadcast is in stereo.

● “

FM stereo mode indicator

FM stereo receiving indicator

XL-MP35HE_QG.pm 03.9.2, 1:46 PM2

■

Clearing all the memory (reset)

1. Press the ON/STAND-BY button to enter the power stand­by mode.

2. Whilst pressing down the MEMORY/SET button and the

button, press the ON/STAND-BY button until “CLEAR”

appears.

Caution:

This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.

■

Maintenance

Routine maintenance is required for continued optimum perfor­mance, refer to the operation manual (page 26).