Sharp WX-T91 User Guide

Introduction

Congratulations on your new 3G/UMTS WX-T91 phone.

About This User Guide

This user guide is carefully designed to help you learn about your phone’s features and operations quickly and effectively.

NOTICE

• We strongly recommend that you keep separate permanent written records of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances. Therefore, we assume no responsibility for data lost or otherwise rendered un usable, whether as a result of improper use, repairs, defects, battery replacement, use after the specified battery life has expired or any other cause.

• We assume no responsibility, directly or indirectly, for financial losses or claims from third parties resulting from the use of this product and any of its functions, such as stolen credit card numbers, the loss or alteration of stored data, etc.

• All company and/or product names are trademarks and/or registered trademarks of their respective holders.

• Screen layout may differ from that illustrated in this user guide. The information described in this user guide is subject to change without notice.

• All the functions described in this user guide may not be supported by all networks.

• We assume no responsibility for downloaded contents, information, etc. from the network.

• Occasionally, a few black or bright pixels may appear on the screen. Please note that this will not have any impact on any of the features or on performance.

According to copyright laws, the reproduction, alteration and use of material which is protected by copyright (music, pictures, etc.) is only permitted for personal or private use. If the user is not in possession of more extensive copyright or has not received the explicit permission from the copyright owner to reproduce, alter or use a copy which has been made or modified in this way, this is considered to be a violation of the copyright laws and gives the copyright owner the right to claim for damages. For this reason, avoid the illegal use of material which is protected by copyright.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Introduction 1

Powered by JBlend™ Copyright 1997-2005 Aplix Corporation. All rights reserved. JBlend and all JBlend-based trademarks and logos are trademarks or registered trademarks of Aplix Corporation in Japan and other countries.

Licensed by Inter Digital Technology Corporation under one or more of the following United States Patents and/or their domestic or foreign counterparts and other patents pending, including U.S. Patents: 4,675,863: 4,779,262: 4,785,450: 4,811,420: 5,228,056: 5,420,896: 5,799,010: 5,166,951: 5,179,571 & 5,345,467

T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat. Nos. KR201211B1 and KR226206B1; and additional patents are pending worldwide.

is a registered trademark of HI

/Micro3D Edition™

2Introduction

T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/ DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat. Nos. KR201211B1 and KR226206B1; and additional patents are pending worldwide.

miniSD™ is a trade mark of SD Card Association.

Bluetooth is a trademark of the Bluetooth SIG, Inc.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sharp is under license. Other trademarks and trade names are those of their respective owners.

is a registered trademark of RealNetworks, Inc.

Contains Macromedia Macromedia, Inc. Copyright © 1995-2005 Macromedia, Inc. All rights reserved. Macromedia, Flash, Macromedia Flash, and Macromedia Flash Lite are trademarks or registered trademarks of Macromedia, Inc. in the United States and other countries.

Licensed by QUALCOMM Incorporated under one or more of the following United States Patents and/or their counterparts in other nations ; 4,901,307 5,490,165 5,056,109 5,504,773 5,101,501 5,506,865 5,109,390 5,511,073 5,228,054 5,535,239 5,267,261 5,544,196 5,267,262 5,568,483 5,337,338 5,600,754 5,414,796 5,657,420 5,416,797 5,659,569 5,710,784 5,778,338

Flash™ technology by

CP8 PATENT

Information contained in this manual is the property of FarEasTone and Sharp. FarEasTone and Sharp reserve the right to change product specifications without prior notice. FarEasTone and Sharp reserve the right to change information contained in this manual without prior notice.

This product is licensed under the MPEG-4 Visual Patent Portfolio License for the personal and non-commercial use of a consumer to (i) encode video in compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a licensed video provider. No license is granted or implied for any other use. Additional information may be obtained from MPEG LA. See http://www.mpegla.com.

Introduction 3

This product is licensed under the MPEG-4 Systems Patent Portfolio License for encoding in compliance with the MPEG-4 Systems Standard, except that an additional license and payment of royalties are necessary for encoding in connection with (i) data stored or replicated in physical media which is paid for on a title by title basis and/or (ii) data which is paid for on a title by title basis and is transmitted to an end user for permanent storage and/or use. Such additional license may be obtained from MPEG LA, LLC. See http://www.mpegla.com for additional details.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

Useful Functions and Services

Your phone offers you the following features:

• Video Calling. You can talk while viewing each other on respective screens.

• 3D and colour Java™ games and applications with a graphic accelerator. You can also download various games and applications from FarEasTone via the mobile Internet.

• A built-in digital camera for taking pictures and video clips.

• A message function for reading and creating SMS messages.

• MMS (Multimedia Messaging Services) for personalising your phone in various ways.

4Introduction

• Email for sending up to 300 KB and receiving mail with attachments.

• A colour WAP browser for accessing information on the mobile Internet.

• Your own ringtones and ringvideos. You can use downloaded sound or video clip files as a ringtone or ring video clip.

• A music player that can play back MP3, AAC and AAC+ format sound files.

• Playback of the downloaded sound and video clip files.

• A voice recorder function for recording and playing back voice clips.

•A Bluetooth

wireless technology interface for establishing contact and transmitting data with certain devices. You can transmit pictures, sounds, and video clips to OBEX-enabled phones.

• An Infrared interface for data communication. You can transmit pictures, sounds and video clips to OBEX-enabled phones.

• A data synchronisation function for updating Phonebook entries on the Internet.

• A schedule alarm for creating and sending schedule entries with alarm settings.

• Video output. You can connect your phone to other devices, such as TVs or videos set to output, and display Java™ data, images, or video clips.

• With the built-in digital camera, you can read texts and barcodes, and create QR codes.

• A miniSD™ memory card slot that expands connectivity with a PC using the memory card.

Introduction 5

Introduction .................................................1

Your Phone ..................................................9

Optional Accessories ................................... 9

Getting Started .......................................... 10

Inserting the SIM/USIM Card and the

Battery ....................................................... 14

Removing the SIM/USIM Card and the

Battery ....................................................... 15

Charging the Battery ................................. 16

Inserting the Memory Card ....................... 18

Removing the Memory Card ..................... 18

Connecting the Stereo Headset ................. 19

Turning Your Phone On and Off ............... 19

Keypad Lock ............................................. 20

Display Indicators (Main Display) ............ 21

Opening Your Phone ................................. 23

Navigating Functions ................................24

Voice Call/Video Calling Functions ......... 25

Making a Voice Call ................................. 25

Speed Dialling ........................................... 26

Redialling .................................................. 26

Answering a Voice Call ............................ 26

Incall Menu (Voice Call) ........................... 27

6 Contents

Making a Video Calling ............................30

Answering a Video Calling .......................30

Incall Menu (Video Calling) ......................31

Using the Menu ..........................................34

Top Menu ..................................................34

List of Menu Functions .............................. 35

Entering Characters ..................................37

Changing the Input Language ....................38

Changing the Input Method .......................38

Chinese User Dictionary ............................43

Using Templates ........................................ 45

Copying, Cutting and Pasting Text ............45

Insert Phonebook Entries ........................... 45

Call Manager ..............................................46

Changing the List Displayed .....................47

Selecting the Storage Memory .................. 47

Sorting the Phonebook List Order ............. 47

Selecting the Search Mode ........................47

Add New .................................................... 47

Viewing My Card ......................................48

Copying Phonebook Entries between SIM/

USIM Card and Handset ............................48

Dialling from the Phonebook ....................48

Editing Phonebook Entries ........................49

Assigning a Ringtone or a Ring Video Clip

File to Each Entry ......................................49

Deleting Phonebook Entries ......................49

Manage Group ...........................................50

Message Groups .........................................50

Memory Status ...........................................51

Speed Dial List ..........................................51

Sending a Phonebook Entry .......................52

Receiving a Phonebook Entry ....................52

Sending a Voice Clip Message or Video Clip Message Using an Address from the

Phonebook .................................................52

Camera ....................................................... 53

Taking Pictures ..........................................53

Recording Video Clips ..............................54

Using the Options Menu in the Viewer

Position of the Display ...............................54

Common Functions in the Photo and Video

Camera Modes ...........................................55

Functions in the Photo Camera Mode ....... 58

Functions in the Video Camera Mode .......60

Messages ................................................... 62

SMS ...........................................................62

MMS ..........................................................62

Email ..........................................................62

Creating a New Message ............................62

Cell Broadcasts ..........................................67

Area Info ....................................................68

Messaging Settings ....................................68

FET Mobile Internet ...................................71

Navigating a WAP Page ............................72

Browser Settings ........................................74

Media Player ...............................................75

TV & Video ...............................................75

Music Player ..............................................77

Gallery ........................................................80

Picture Gallery ...........................................80

Video Gallery .............................................81

Sound Gallery ............................................82

Other Documents .......................................83

Common Option Menus .............................83

Text Templates ...........................................86

Memory Status ...........................................86

Java™ .........................................................87

Java™ Gallery ............................................87

Set Java™ Wallpaper .................................88

Java™ Settings ...........................................89

Java™ Information .....................................90

Contents 7

Organiser ...................................................91

Calendar .................................................... 91

Alarms ....................................................... 94

Calculator .................................................. 96

Voice Recorder .......................................... 97

Scanner ...................................................... 97

Stopwatch .................................................. 99

Tasks ........................................................ 100

World Clock ............................................ 101

Countdown Timer ................................... 102

Expenses Memo ...................................... 102

Phone Help .............................................. 103

SIM Application ....................................... 104

Settings ....................................................105

Profiles .................................................... 105

Setting the Display .................................. 109

Sound Settings ......................................... 112

Date & Time ............................................ 112

Language Setting ..................................... 113

Call Settings ............................................ 114

Video Calling Settings ............................ 118

Security .................................................... 119

Card Settings ........................................... 121

Master Reset ............................................ 121

8 Contents

Call Log .....................................................122

Call Timers ..............................................122

Data Counter ............................................123

Connectivity .............................................124

Bluetooth ................................................. 124

Infrared ....................................................127

Network Settings ..................................... 127

Internet Settings ....................................... 128

Off Line Mode ......................................... 130

Backup/Restore ........................................130

Connecting WX-T91 to Your PC .............132

System Requirements .............................. 132

3G/GSM GPRS Modem .......................... 132

Handset Manager ..................................... 133

Software Installation ................................133

Troubleshooting ......................................135

Safety Precautions and Conditions of

Use ............................................................138

Conditions of Use ....................................138

Environment ............................................ 141

Precautions Concerning Vehicle Use ......141

SAR ......................................................... 141

Precautions for Use in USA .....................142

Out of Warranty List ................................144

Index .........................................................145

Your Phone

Please check the following carefully. Your phone should come complete with:

• 3G (UMTS)/GSM 900/1800/1900/GPRS phone

• Lithium-Ion Battery

•Battery Cover

• AC Charger

• Stereo Headset

Optional Accessories

• Stereo Headset (without Microphone)

• Handsfree Microphone Unit (with Switch)

•Video Cable

• Cigarette Lighter Charger

•USB Data Cable

The above accessories may not be available in all regions.

For details, please contact your dealer.

Your Phone 9

Getting Started

10 Getting Started

1. Earpiece

2. Navigation Keys (Arrow Keys):

a b c d Moves cursor to highlight

a menu item, etc.

Up arrow key: Displays the Shortcut

menu when pressed in standby.

Down arrow key: Displays the Phonebook

entries when pressed in standby.

Left arrow key: Displays the list of Java™

Gallery when pressed in standby.

Right arrow key: Displays Gallery when

pressed in standby.

3. Centre Key: Displays the Main menu in

standby, and executes the highlighted function.

4. Left Soft Key:

Executes the function in the lower left of the screen. Displays Messaging menu in standby.

5. Send/Redial Key:DMakes or accepts calls,

displays the call logs in standby.

6. Video Calling Key:SMakes or accepts Video

Callings, and displays the call logs in standby.

7. Voice Mail Key:GLong press to connect to

the Voice Mail centre. (Depending on the SIM/ USIM card.)

8. * /Shift Key:

Switches character input method as follows on the text entry screen. In English mode: Abc, ABC, abc and 123. In T9 mode, T9 Abc, T9 ABC, T9 abc and 123. In traditional Chinese mode: Abc, ABC, abc, 123, T9 BoPoMoFo, and T9 Stroke.

Press to enter P, ?, – or * in standby. Long press in standby to lock the keypad.

9. Sub Camera (Internal Camera)

10. Main Display

11. Microphone (for the viewer position of the display)

Getting Started 11

12. Right Soft Key:CExecutes the function in

the lower right of the screen.

Shortcut to “FET Mobile Internet” by opening the browser. Press in standby.

13. End/Power Key:FEnds a call and turns

power on/off.

14. Clear/Back Key:UClears the characters

before the cursor, returns to the previous screen, etc.

15. Music Key:

Displays Music menu in standby.

16. Keypad

12 Getting Started

17. #/Silent Key:

Displays symbols screen on the text entry screen.

Long press to switch languages on the text entry screen. Turns the flash/auxiliary light on or off in camera mode. Long press in standby to switch Profiles settings between the mode most recently activated and Silent mode.

18. Microphone

19. Camera (External Camera)

20. Battery Cover

21. Built-in Aerial: Warning: Do not cover the

top of the phone with your hand when in use as this may interfere with the performance of the built-in aerial.

22. Mobile Light: Used as a flash or an auxiliary light in camera mode.

23. Infrared Port: Sends and receives data via infrared.

24. Stereo Speakers

25. Small Light: Used as a battery charge

indicator, Event Light and Status Light.

26. Side Keys (V/W): (These two keys work in reverse with the viewer position of the display.) Moves the highlight up or down.

Press in standby or during a call to increase or decrease the earpiece volume.

27. Menu Key:

Executes the function in the lower left of the screen in the viewer position of the display.

28. Camera Key:

Displays the Main menu when pressed in standby, then executes a highlighted function in the viewer position of the display.

Long press to activate the camera. Press during an incoming call alert to answer the call in the viewer position of the display.

Getting Started 13

29. Cancel Key:

30. Memory Card Slot Cover

31. VIDEO OUT/Stereo Headset Connector External Connector

32.

14 Getting Started

Executes the function in the lower right of the screen in the viewer position of the display. Long press in standby to turn the mobile light on. You can change the light colours by pressing V or

when the mobile light is

on. Long press to reject an

incoming call. Press during an incoming call alert to send a busy tone to the caller in the viewer position of the display. Press to end the call in the viewer position of the display.

Used to connect either the charger or a USB data cable.

Inserting the SIM/USIM Card and the Battery

1. Slide off the battery cover ( ).

2. Slide the SIM/USIM card into the SIM/USIM

holder.

SIM/USIM card

3. Hold the battery so that the metal contacts of the

battery are facing down, slide the guides on the top of the battery into the battery slot ( ), and then insert it ( ).

4. Replace the battery cover.

Note

• Make sure that only 3V SIM/USIM cards are used.

• Make sure that the standard accessory battery is

used.

Removing the SIM/USIM Card and the Battery

1. Ensure that the phone is turned off and that the

charger and other accessories are disconnected. Slide off the battery cover.

2. Lift the battery using the protruding edge and

remove the battery from the phone.

3. Hold down gently while sliding the SIM/USIM

card out of the SIM/USIM holder ( ).

Getting Started 15

Battery Disposal

The device is battery-powered. In order to protect the environment, please read the following points concerning battery disposal:

• Take the used battery to your local waste depot,

dealer or customer service centre for recycling.

• Do not expose the used battery to a naked flame,

immerse in water or dispose with the household waste.

16 Getting Started

Charging the Battery

Using the Charger

1. Open the cover of the external connector, connect

the charger to the external socket located at the bottom of the phone by pressing both sides indicated with arrows, and connect to an AC outlet.

Small light

The small light turns on. Standard charging time: Approx. 140 minutes

Note

• When you purchase this phone, the battery may not

be fully charged.

• Charging time may vary depending on the state of the

battery and other conditions. (See “Battery” on page 139.)

To Disconnect the Charger

When charging is complete, the small light turns off.

1. Unplug the charger from the AC outlet, then unplug

the charger connector from the phone.

2. Close the cover.

Note

• Do not use any non-approved chargers as they may

damage your phone and invalidate any warranties, see “Battery” on page 139 for details.

IMPORTANT SAFETY INSTRUCTIONS — SAVE THIS INSTRUCTION DANGER — TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THIS INSTRUCTION

If the shape and size of the plug do not match the power socket, use a plug adapter that matches.

To Charge Using the Cigarette Lighter Charger

The optional cigarette lighter charger supplies power for charging from the cigarette lighter socket of a car.

Battery Level Indicator

The current battery level is displayed in the upper right of the main display.

Low Battery during Use

When the battery is running low, an alarm will sound and “ ” is displayed on the main display.

If you are using your phone and you hear the low battery alarm, attach your charger as soon as possible. The phone may not be able to continue normal operation if you continue to use it.

Battery Indicators Charge Level

Sufficiently charged

Charging recommended

Charging required

Empty

Getting Started 17

Inserting the Memory Card

1. Turn off the phone.

2. Open the memory card slot cover and insert the card

with the label side facing up.

3. Insert the memory card all the way in until it clicks.

4. Close the cover.

Note

• Make sure that the phone is turned off before

inserting the memory card.

• Be sure to insert the card in the correct direction and

orientation.

• Do not open the memory card cover while the

memory card is being formatted or written to. The card may be damaged beyond use.

• Keep all memory cards out of the reach of small

children.

18 Getting Started

Tip

• You see the following indicators when the memory

card is in use:

: Appears when the card is inserted. : Appears when the card is damaged or unusable. : Appears when the card is being written or read. : Appears when the card is being formatted.

Removing the Memory Card

1. Open the memory card slot cover and slightly push

the card so it pops out. Remove the card and close the cover.

Note

• Make sure that the phone is turned off before

removing the memory card.

• Do not remove the memory card while the memory

card is being formatted or written to.

Connecting the Stereo Headset

1. Open the cover of the Stereo Headset Connector.

2. Connect the Stereo Headset.

Turning Your Phone On and Off

To turn the power on, long press F for approximately 2 seconds.

To Enter the PIN Code

If activated you are asked to enter a PIN (Personal Identification Number) code and handset lock code after turning on your phone.

1. Enter your PIN code.

The PIN code is 4 to 8 digits.

2. Press .

Note

• If your PIN code is entered incorrectly three times in

a row, the SIM/USIM card is locked. See “Enabling/ Disabling the PIN Code” on page 119.

• If the clock settings have not been entered, the date

and time entry screen is displayed (p. 112).

Getting Started 19

To Copy All Phonebook Entries from the SIM/ USIM Card

When you insert the SIM/USIM card into your phone for the first time and start the Phonebook application, you are asked whether you wish to copy Phonebook entries on the SIM/USIM card. Follow the on-screen instructions, or you can do it later using the Phonebook menu as follows:

→

“Call Manager” Entries”

“Advanced” → “Copy All

1. Select “From SIM to Handset”.

Keypad Lock

You can lock the keypad to prevent it from being pressed accidentally.

Locking the Keypad

1. Long press P in standby.

To unlock, long press P.

Tip

• Emergency numbers (112, etc.) can be entered and

dialled regardless of the keypad lock.

20 Getting Started

Display Indicators (Main Display)

Indicator area

Left soft key

Centre key

Right soft key

1. / : Strength of received signal/Service out of range

: 3G (UMTS)/GPRS

: GSM/GPRS

: Roaming outside network

2. : Off Line Mode [enabled]

3. : Data exchange with external device

4. / : Connection to the server [established/ communicating]

5. : Memory card inserted

6. / : Voice call [incoming/in progress]

7. / / : Video calling communication mode enabled [voice and video/voice/video]

8. : Diverts set to “Voice calls” of “All Calls”

9. : Secure WAP page displayed

10. / / : Alerts [text message/multimedia message/Email]

Getting Started 21

11. /////: Connection status [USB working/IrDA standby/IrDA working/Bluetooth standby/Bluetooth working/Talking with the Bluetooth headset]

12. / : Java™ application [executed (colour)/ suspended (grey)]

13.(No display)/////: Current profile [Normal/Meeting/ Activity/Car/Headset/Silent]

14. ////: Silent/vibration setting [silent/ increasing volume/vibration enabled/ silent and vibration enabled/increasing volume and vibration enabled]

15. / / : Speaker mode [speaker phone/speaker activated/microphone muted]

22 Getting Started

16. : Battery level

17. : Daily alarm enabled

18. / : Schedule entry enabled [with/without reminder alarm]

19. : Outbox contains unsent messages [text message/multimedia/email]

20. : WAP alert

21. : Voice mail message alert

22. : Connection status [1st IrDA communication [enabled/exchanging information]]

23. : Phone Lock enabled

24. : Keypad Lock enabled

25. /(blank): IrDA setting [enabled/disabled]

26. / : Phonebook Search Mode

Opening Your Phone

Your phone can be opened in the following three positions: normal, self-portrait and viewer positions.

Normal Position ( )

1. Open the phone until the display stops as illustrated.

Self-portrait Position ( )

2. Turn the display 180° clockwise.

Use this position to take a self-portrait with the external camera.

Do not turn the display anticlockwise as this may damage it.

Viewer Position ( )

3. Close the main display toward the keypad.

Note

• Operations of V and W are reversed in the viewer

position of the display.

• Keypad operations cannot be performed in the

viewer position of the display.

• Be careful not to carry the phone in the viewer

position of the display as this may damage the display.

Getting Started 23

Navigating Functions

All applications are accessed from the Main menu. To open the Main menu, press the centre key ( ) in standby.

To launch applications, you will need to highlight menu items, and make selections. To select a menu item (indicated in quotation marks), move the cursor using a, b, c and d, and press to select.

In certain procedures, you will need to press one of the soft keys (indicated in square brackets), which are displayed in the lower left and right of the screen. Press the corresponding soft key (A or C).

To return to the previous screen, press the right soft key if it displays Back. To close the Main menu, press the right soft key if it displays Exit.

Each section in this user guide starts with a list of items you will need to select in order (indicated in italics) before performing the procedures shown. Select each item to reveal the next set of items that you have to select. Open subsection items after opening those listed in the main section.

Example:

→

“Call Manager”

24 Navigating Functions

“Phonebook” → “Add New”

Using in the Viewer Position of the Display

Available keys in viewer position of the display are V, W, X, Y and Z.

To open the Main menu, press Y in standby. To select a menu item (indicated in quotation marks),

press V or W, and press Y to select. In certain procedures, you will need to press one of the

soft keys (indicated in square brackets), which are displayed in the lower left and right of the screen. The left soft key is X and the right soft key is Z.

The side keys function in camera mode as follows:

: Zoom-in/Zoom-out

V/W X: Options Y: Capture Z: Switches between the photo camera and

video camera modes.

Voice Call/Video Calling Functions

Making a Voice Call

1. Enter the area code and the phone number you wish

to dial and press D to dial. If you enter the wrong number, press U to delete

the number to the left of the cursor.

Emergency Calls

1. Enter 112, 911 or 999 (international emergency

number) using the keypad and press D to dial.

Note

• Emergency calls may not be able to be made on all

mobile phone networks when certain network services and/or phone features are in use. Contact your service provider for more information.

• This emergency number can normally be used to

make an emergency call in any country, with or without a SIM/USIM card inserted, if a 3G (UMTS)/ GSM network is within range.

International Calls

1. Long press Q until a + (international dialling

prefix) sign is displayed.

2. Enter the country code, followed by the area code

(without the leading zero) and the phone number, and press D to dial.

Adding an Entered Phone Number to the Phonebook

1. After entering a phone number, press [Options] and

select “Save Number”. For details on creating a new entry, see “Add New”

on page 47.

Showing or Hiding My Phone Number on the Display of the Called Party

1. After entering a phone number, press [Options] and

select “Show My ID” or “Hide My ID”.

Making a Call Using the Phonebook in the Viewer Position of the Display

1. Press Y.

2. Select “Call Manager”.

3. Select “Phonebook”.

4. Select the entry you wish to call.

5. Select the phone number.

6. Select “Call” to dial.

To end a call, press Z.

Voice Call/Video Calling Functions 25

Speed Dialling

Up to 8 phone numbers from the Phonebook memory (Handset and SIM/USIM) can be assigned to speed dials. You can call the numbers using the digit keys (G to O). The phone number of the Voicemail centre is assigned to G.

For details on setting the speed dial list, see “Speed Dial List” on page 51.

1. To dial a number using the speed dial, long press

any of the digit keys (G to O). The phone number saved in the speed dial list is

dialled.

Redialling

You can redial numbers in the call log. Select from specific categories or “All Calls”. Specific categories contain up to 30 numbers and the “All Calls” list contains up to 90.

1. Press D in standby.

2. Select the category from “All Calls”, “Dialled

Numbers”, “Missed Calls” or “Received Calls”. To switch logs, press c or d.

3. Highlight the phone number you wish to call.

4. Press D to redial the call.

26 Voice Call/Video Calling Functions

Answering a Voice Call

When an incoming call is detected, the phone rings.

1. Press D or [Answer] to answer the call.

Or press any key (except F, U and [Busy]) when the “Any Key Answer” function is enabled. Set the Any Key Answer function in the profile of each mode (p. 109).

Tip

• If you have subscribed to the Calling Line

Identification (CLI) service and the caller’s network sends the number, the caller’s number is displayed on the screen. If the caller’s name and number are saved in the Phonebook, the caller’s name and phone number are displayed on the screen.

• If the number is a restricted number, the display

shows “Withheld”.

• When you receive a call from the person whose

picture is registered in the Phonebook, the picture, name and phone number are displayed.

Answering a Call in the Viewer Position of the Display

1. Press X or Y to answer the call.

To end a call, press Z. To reject the incoming call, long press Z.

Rejecting an Incoming Call

1. Press F while the phone is ringing to reject a call

you do not wish to answer.

Letting the Caller Know You are Unavailable

1. Press [Busy] while the phone is ringing to send a

busy tone to the caller.

Incall Menu (Voice Call)

Your phone has additional functions available while a call is in progress.

Adjusting the Earpiece Volume

During a call, you can adjust the earpiece volume (and Stereo Headset volume, if connected).

1. Press V or W to display the Earpiece Volume

screen.

2. Press

(or a/d) to increase the volume of the call

or press W (or b/c) to decrease the volume.

3. Press when the volume is set to the desired

level.

Tip

• In the viewer position of the display, press X or Y to display the incall menu.

• In the viewer position of the display, use V or W to increase or decrease the earpiece volume. Operations of these keys are reversed in the viewer position.

Turning the Speaker On and Off

You can talk via the loudspeaker on the back of the phone by turning it on.

1. During a call, press [Options] and select

“Loudspeaker On”.

Putting a Call on Hold

This function allows you to manage two calls at the same time. If you wish to make another call while you are talking to someone, you can put the current call on hold to call someone else.

Voice Call/Video Calling Functions 27

To Make Another Call during a Call

1. During a call, press [Options] and select “Hold”.

The current call is put on hold.

2. Press [Options] and select “Dial New Number”.

3. Enter the phone number you wish to make another

call to, then press D.

Tip

• You can also make another call by entering the phone

number during a call instead of step 1. The current call is automatically put on hold.

Accessing SMS/MMS Menu during a Call

1. During a call, press [Options] and select

“Messages”. The following options are available: “Create

Message” to make an SMS and MMS, or “Inbox”, “Sent” or “Drafts” to access these folders. For details on SMS, see “SMS” and “MMS” on page 62.

Call Waiting

This service notifies you of another incoming call while you have a call in progress.

28 Voice Call/Video Calling Functions

1. During a call, press [Options] and select “Hold &

Answer” to answer the second call. The first call is put on hold and you can now talk to

the second caller.

Note

• You need to set “Call Waiting” to “On” if you use the

Call Waiting service (p. 115).

• Call Waiting service may not be available on all

networks. Contact your network operator for more information.

• If you do not wish to answer the second call, press

[Options] and select “Busy” in step 1. If “Reject” is selected, the log of the second call is saved as a missed call.

Conference Call

Conference call is a call with more than 2 participants. You may include up to 5 participants in a conference call.

To Make a Conference Call

You must have one active call and one held call.

1. During a call, press [Options] and select “Multi

Party”.

2. Select “Conference All” to join the conference call.

3. Press F to end the conference call.

Note

• The conference call service may not be available on

all networks. Contact your network operator for more information.

• You have more options for the Conference call in step

• To put all participants on hold, select “Hold All”.

• To put all participants except the current call on

hold, select “Private”.

• To end the call with all participants, select “End

Active Call(s)” or “End Held Call(s)”.

• To reject adding more participants to the current

party, press [Options] and select “Reject”, or you can send the busy tone by selecting “Busy”.

To Add New Participants to the Conference Call

1. Press [Options] and select “Dial New Number”.

2. Enter the number you wish to include in the

conference call and press D to dial.

3. Press [Options] and select “Multi Party”.

4. Select “Conference All” to join the conference call.

If you wish to add other participants, repeat steps 1 to 4.

To End the Call with a Conference Call Participant

1. During a conference call, highlight the person that

you wish to disconnect from the conference call.

2. Press [Options] and select “End This Call”.

To Have a Private Conversation with One of the Participants

If you wish to have a private conversation with one of the participants, you may select the participant from the conference list and put the other participants on hold.

1. During a conference call, select the person that you

wish to talk to.

2. Press [Options] and select “Multi Party”.

3. Select “Private”.

4. Once you have finished the private conversation,

press [Options] and select “Multi Party”.

5. Select “Conference All” to return to the conference

call.

Voice Call/Video Calling Functions 29

Muting the Microphone

1. During a call, press [Mute].

To unmute the microphone, press [Unmute].

Making a Video Calling

Note

• Use this function with only the video calling enabled

phones.

• Make sure that the battery is fully charged and the

signal is strong before using this function.

• Turn the loudspeaker on or use a switch-equipped

Stereo Headset so that you can talk while looking at the video calling screen on the main display.

Making a Video Calling

1. Enter the area code and the phone number you wish

to dial and press S, or press [Options] and select “Video Calling” to dial.

If you enter the wrong number, press U to delete the number to the left of the cursor. When the line is connected, the image of the called party is displayed upper on the screen, and yours lower left.

30 Voice Call/Video Calling Functions

Tip

• If the called party’s phone is not video calling

enabled, you can press F and enter the phone number again to make a voice call.

Answering a Video Calling

When an incoming call is detected, the phone rings.

1. Press S or D to answer the video calling or

press A [Answer] to select “Hide Picture”, “Show Picture”, “Reject Call” or “Busy”.

Tip

• If you have subscribed to the Calling Line

Rejecting an Incoming Call

1. Press F while the phone is ringing to reject a call

you do not wish to answer.

Letting the Caller Know You are Unavailable

1. Press [Busy] while the phone is ringing to send a

busy tone to the caller.

Incall Menu (Video Calling)

Muting the Microphone

1. During a video calling, press [Mute].

To unmute the microphone, press [Unmute].

Switching Images

You can switch images between the main and sub screens.

1. During a video calling, press [Options] and select

“Switch Images”.

Tip

• You can also switch images between the main and

sub screens by pressing during a video calling.

Changing the Image of Yourself

1. During a video calling, press [Options] and select

“Camera Picture”.

2. Select “Internal Camera”, “External Camera” or

“Alternative Image”. “Internal Camera”: The image through the

internal camera is displayed and sent to the party.

“External Camera”: The image through the

external camera is displayed and sent to the party.

“Alternative Image”: The camera is turned off and

the image selected in “Alternative Image” of “Video Calling Settings” (p. 118) is used.

Tip

• You can also switch the image shown to the caller by pressing c or d during a video calling.

Voice Call/Video Calling Functions 31

Using the Optical Zoom Function

The optical zoom enables you to zoom the picture more clearly by the actual zooming action of the optical lens. The optical zoom is used up to the [×2] zooming ratio. If the zoom exceeds [×2], the digital zoom is used to further magnify.

1. During a video calling, press [Options] and select

“Enable Opt. Zoom”.

2. Press a or b.

Turning the Speaker On and Off

You can talk via the loudspeaker on the back of the phone by turning it on.

1. During a video calling, press [Options] and select

“Loudspeaker On”.

Note

• In a high-noise environment, you may not be able to

continue a call, or make a clear call. We recommend that you use the Stereo Headset.

• With this option, you may not be able to continue a

call without interruption if you increase the earpiece volume. We recommend that you decrease the earpiece volume or use the Stereo Headset.

32 Voice Call/Video Calling Functions

Video Calling Settings

To Change the Quality of the Incoming Image

You can adjust the quality of the called party’s image.

1. During a video calling, press [Options] and select

“Video Calling Settings”.

2. Select “Incoming Picture Quality”.

3. Select “Normal”, “Quality Priority” or “Frame Rate

Priority”. “Normal”: The standard quality is

used.

“Quality Priority”: The quality of the picture

takes precedence over the frame rate.

“Frame Rate Priority”: The frame rate takes

precedence over the quality.

To Turn the Backlight On or Off

You can turn on the backlight of your screen.

1. During a video calling, press [Options] and select

“Video Calling Settings”.

2. Select “Backlight”.

3. Select “Always On”, “Always Off

Setting”. When “Always On” is selected, the backlight will

always be on during a video calling. When “As Normal Setting” is selected, the backlight will time out depending on the Backlight setting (p. 110).

To Adjust the Video Exposure

” or “As Normal

1. During a video calling, press [Options] and select

“Video Calling Settings”.

2. Select “Exposure”.

3. Press a (Bright) or b (Dark).

Mirror Image

During a video calling, you can reverse your image on the sub screen.

1. During a video calling, press [Options] and select

“Video Calling Settings”.

2. Select “Mirror Image”.

3. Select “On” or “Off

”.

To Change the Sub Camera Image to the Alternative Image

During a video calling, you can switch the image shown to the caller between the sub camera image and an alternative image or display an image while putting a call on hold from the saved picture files.

1. During a video calling, press [Options] and select

“Video Calling Settings”.

2. Select “Alternative Image” or “Hold Guidance

Picture”.

3. Select “Preset Picture” or “Picture Gallery”.

Voice Call/Video Calling Functions 33

Using the Menu

Top Menu

1. Press in standby.

The Main menu is displayed.

2. Press a, b, c or d to highlight the desired

menu, then press to access the function. The sub menu is displayed.

For details on the menu options, see “List of Menu Functions” on page 35.

34 Using the Menu

Using the Menu in the Viewer Position of the Display

1. Set the phone in the viewer position of the display.

2. Press Y to display the Main menu.

3. Press V or W to move the cursor up or down, then

press X or Y. Press Z to return to the Main menu.

The cursor moves the same as in the normal position of the display by using V and W. For details on the functions of these keys, see page 13.

List of Menu Functions

Menu No./Main Menu Menu No./Sub Menu1

1 Java™

2 FET Mobile Internet

3 Organiser

1 Java™ Gallery 2 Set Java™ Wallpaper 3 Java™ Settings 4 Java™ Information

1 Homepage 2 Go to URL 3 Bookmarks 4 Alert Inbox 5 My Saved Page 6 Access History 7 Browser Settings 8 Music & Picture 9 Community 10 Game 11 Fortune Telling 12 MMS Show 1 Calendar 2 Alarms 3 Calculator 4 Voice Recorder 5 Scanner 6 Stopwatch 7 Tasks 8 World Clock 9 Countdown Timer 10 Expenses Memo 11 Phone Help

Menu No./Main Menu Menu No./Sub Menu1

4 Messages

5 Camera

6 Gallery

7 Media Player

1 Create Message 2 Inbox 3 Alert Inbox 4 Drafts 5 Templates 6 Sent 7 Outbox 8 Voice Mail 9 Cell Broadcasts 10 Area Info 11 Messaging Settings 12 Memory Status

1 Picture Gallery 2 Video Gallery 3 SD VIDEO 4 Sound Gallery 5 Java™ Gallery 6 Text Templates 7 Other Documents 8 Memory Status

1 TV & Video 2 Music Player

Using the Menu 35

Menu No./Main Menu Menu No./Sub Menu1

8 Call Manager

9 Settings

10 SIM Application

11 Call Log

12 Connectivity

1 Phonebook 2 Manage Group 3 Speed Dial List 4 My Card 5 Message Groups 6 Phonebook Settings 7 Advanced 1 Profiles 2 Display Settings 3 Sound Settings 4 Date & Time 5 Language 6 Call Settings 7 Video Calling Settings 8 Security Settings 9 Card Settings 10 Master Reset

1 All Calls 2 Dialled Numbers 3 Missed Calls 4 Received Calls 5 Call Timers 6 Call Costs 7 Data Counter 1 Bluetooth 2 Infrared 3 Network Settings 4 Internet Settings 5 Off Line Mode 6 Backup/Restore

36 Using the Menu

Entering Characters

When entering characters to create Phonebook entries, SMS or MMS, etc., press the corresponding keys.

In multi-tap input method, press each key until the desired character is displayed. For example, press H once for the letter “A” or twice for the letter “B”.

Multi-tap Mode

Pressing each key scrolls characters in the following order.

Multi-tap Mode keys

Key

G H

I J K L M

Upper Case

Characters

. (full-stop) , (comma) ? ! : ; ’ (apostrophe) " / 1

ABC2 abc2 2

DEF3 def3 3

GHI4 ghi4 4

JKL5 jkl5 5

MNO6 mno6 6

PQRS7 pqrs7 7

Lower Case

Characters

Numeric

Key

N O Q P

G-O Q

P R

Upper Case

Characters

TUV8 tuv8 8

WXYZ9 wxyz9 9

(space)+ = < > € £ $ ¥ % & 0 0

Switches character case among four modes: Abc, ABC, 123 and abc.

.,?!:;''' ↵

@/ \ # * = | ^ ¿ ¡

_(<[ $£¥€§ß

-)> ]ЕДЖЬьщ +{еджаЗЙи й

&} ì ñ ÑÖØö ø ò

˜ ∆ΦΓ ΛΩΠΨΣΘ

% Ξ ¤

: Long press to enter 1 - 9 numbers.

: Long press to enter space in

: Long press to shift between multi-

: Long press to display the Input

Numeric mode or to enter 0 in other modes.

tap and T9 mode.

Language screen.

Lower Case

Characters

Entering Characters 37

Numeric

Changing the Input Language

1. On the text entry screen, press [Options].

2. Select “Input Language”.

3. Select the desired language.

Changing the Input Method

1. On the text entry screen, press [Options].

2. Select “Input Method”.

3. Select the input method you wish to use.

Tip

• In T9 or multi-tap mode, you can switch input mode

as follows by pressing P.

English/T9 mode

English/Multi-tap mode

Input Method

T9 Mode

Multi-tap mode

Others Symbol Table Symbol Table

38 Entering Characters

Input Language

= English

T9 Abc

T9 ABC

T9 abc

Abc

ABC

abc

Numeric

Input Language

= Traditional

Chinese

T9 Stroke

T9 BoPoMoFo

Abc

ABC

abc

Numeric

Traditional Chinese/T9 mode

T9 English Mode

Using T9 English Mode

T9 text input method is a shortcut to enter text easily and quickly.

1. On the text entry screen, press [Options].

2. Select “Input Method”.

3. Select the T9 mode (T9 Abc, T9 ABC, T9 abc) you

wish to change. “ ” is displayed on the main display.

4. Press the keys to enter characters.

5. Press a or b to select the word you wish to input.

6. If you wish to clear the word, highlight it and long

press U.

7. Press or select [Options] and “Done” to

complete the selection.

Tip

• If you press Q instead of step 6, a space is inserted

next to the selected word.

User Dictionary

You can create your own English words for T9 Alphabet text input.

Note

• This function is only available when “Input Language” is set to “English”.

1. On the text entry screen in T9 mode, press [Options]

and select “User Dictionary”.

2. Select “Add New Word” and enter a new word.

To edit a word in the list

1. On the text entry screen in T9 mode, press [Options]

and select “User Dictionary”.

2. Highlight the desired word.

3. Press [Options] and select “Edit”.

4. Modify the word.

Entering Characters 39

T9 BoPoMoFo and T9 Stroke Mode

In T9 BoPoMoFo and T9 Stroke mode, keys are as follows.

T9 BoPoMoFo and T9 Stroke Mode keys

Key BoPoMoFo Stroke

G H I J K L

Wildcard

M N O P Q R

40 Entering Characters

Go to the FullWidth Symbols screen.

Space

G-O

Changing the Input Method between Stroke and BoPoMoFo

See “Changing the Input Method” on page 38.

: Long press to input corresponding

Chinese character displayed in the candidate field.

: Press to change the input method.

Long press to enter tones “ ” in T9 BoPoMoFo mode.

: Press to display the FullWidth

Symbols screen. Long press to display the Input Language screen.

Using BoPoMoFo Input Mode The following is an example of entering “ ” for

“”.

1. Press J, Q, and M (2

Input field

Long press the

corresponding numeric

key to select the desired

character directly from

the Candidate field.

Candidate field

times quickly) to enter reading. The candidates with the same

reading are displayed in the Candidate field.

2. Long press K if the desired

character is displayed.

3. Repeat steps 1 and 2 to complete messages.

Entering Characters 41

Tip

• When the cursor is placed after the first character, the Candidate field displays characters most likely to follow.

• If you want to use tone options, long press P instead of step 2 to display the desired character. The tone symbols are displayed in the Candidate field. The candidates are displayed. Press the corresponding numeric key (H).

42 Entering Characters

Using Stroke Mode

The following is an example of entering “ ”.

1. Change the input mode to T9

Stroke mode.

2. Press I G J to

display the corresponding stroke for “ ”.

3. Long press M to complete the selection.

Chinese User Dictionary

You can create your own word list for T9 traditional Chinese input.

You can enter Chinese characters, alphabet, symbols and numbers.

Note

• This function is only available when “Input

Language” is set to “Traditional Chinese”.

Creating a New Entry

1. On the text entry screen, press [Options] and select

“Chinese User Dictionary”.

2. Select “Add New Word”.

3. Enter new word.

Editing a Word in the List

1. On the text entry screen, press [Options] and select

“Chinese User Dictionary”.

2. Highlight the desired word.

3. Press [Options] and select “Edit”.

4. Modify the entry word.

Deleting a Word

1. On the text entry screen, press [Options] and select

“Chinese User Dictionary”.

2. Highlight the desired word.

3. Press [Options] and select “Delete”.

4. Press [Yes] or [No].

Entering Characters 43

Finding an Entry

You can recall Chinese word entries by entering the first few characters.

The following is an example from the Chinese User Dictionary.

Please notice the word is already stored at this example.

1. Press L (3 times quickly),

then long press G and enter “”.

This example is using BoPoMoFo mode

2. The character “ ” appears at

Normally “ ” appears here.

3. Long press O and enter

“”.

44 Entering Characters

4. Long press O, then the

following characters appear.

Note

• This function doesn’t appear, if the entry word was made by less than 4 letters or no Chinese characters included. Though, you can use this as a shortcut if the word was created by Chinese character, since candidate character appears at so you only have to press O without searching for following characters.

• If there were a stored word which shares the first 1-4 character such as “ ”, candidate “ ” appears at or . The latest entry comes to , and if there were three or more entry starts with “ ”, old candidate disappears.

• If there were a stored word which shares the first 5 or more characters, such as “ ”, after “ ” was entered, the latest character of entry completes.

Using Templates

You can use the sentences registered in Text Templates when entering characters.

For details on creating the text template, see “Adding Phrases to Text Templates” on page 86.

1. On the text entry screen, move the cursor to the

point you wish to insert the template.

2. Press [Options] and select “Advanced”.

3. Select “Insert Template”.

4. Select the desired text template.

The selected text template is inserted.

Copying, Cutting and Pasting Text

1. On the text entry screen, press [Options] and select

“Advanced”.

2. Select “Copy” or “Cut”.

3. Move the cursor to the first letter to be copied or to

be cut, then press .

4. Move the cursor to the last letter to highlight the

area, then press .

5. Move the cursor to the point you wish to paste the

letters.

6. Press [Options] and select “Advanced”.

7. Select “Paste”.

Insert Phonebook Entries

You can insert the entries registered in Phonebook when entering characters.

For details on creating the Phonebook entries, see “Call Manager” on page 46.

1. On the text entry screen, move the cursor to the

point you wish to insert the Phonebook Entry.

2. Press [Options] and select “Advanced”.

3. Select “Insert Phonebook Entry”.

4. Select the desired Phonebook Entry.

The selected entry is inserted.

Entering Characters 45

Call Manager

You can store the phone numbers and Email addresses of your friends, family and colleagues in the Phonebook.

Your phone can store up to 500 entries. In a Phonebook, you can save the following items:

Items Saved in the Handset Memory

Last Name up to 16 characters First Name up to 16 characters Add Phone

Number Add Email

Address Group 16 groups Street Name up to 64 characters City Name up to 64 characters State Name up to 64 characters Postcode up to 20 characters Country Name up to 32 characters Note up to 256 characters Birthday (date)

46 Call Manager

(M 8)

up to 3 phone numbers (up to 32 digits each)

up to 3 Email addresses (up to 128 characters each)

Picture (file name) Assign Tone/

Video Secret (On or Off)

Items Saved in the SIM/USIM Memory

Name up to 16 characters Add Phone

Number Add Email

Address Group up to 16 groups

Note

• Each item depends on SIM/USIM Cards.

(file name)

1 phone number (up to 32 digits)

1 Email address (up to 38 characters)

Changing the List Displayed

“Call Manager” → “Phonebook Settings” → “Source”

1. Select “Handset” or “SIM”.

Selecting the Storage Memory

“Call Manager” → “Phonebook Settings” → “Save to”

1. Select “Handset”, “SIM” or “Choice”.

Sorting the Phonebook List Order

You can change the listing order of the Phonebook entries between by BoPoMoFo order or by group.

“Call Manager” Phonebook”

→

“Phonebook Settings” → “View

1. Select “By BoPoMoFo” or “By Group”.

Selecting the Search Mode

“Call Manager” → “Phonebook Settings” → “Search Mode”

1. Select “Character Search”, “BoPoMoFo Search” or

“English Search”.

Add New

You can choose either the phone or SIM/USIM card memory locations to store the new entry. For switching locations, see “Selecting the Storage Memory”.

The amount of phone numbers that you can store to the SIM/USIM card is dependent on its capacity. Contact your network operator for details.

→

“Call Manager”

If you select the “Choice” option for the memory to be used, the selection is between “To Handset” and “To SIM”.

1. Select the field you wish to fill in, and enter the

relevant information.

2. Press [Save] when finished.

Tip

• To create an entry, at least one field must be filled

(“Last Name”, “First Name”, “Add Phone Number” or “Add Email Address” for the handset memory; “Name”, “Add Phone Number” or “Add Email Address” for the SIM/USIM memory).

“Phonebook” → “Add New”

Call Manager 47

Adding a Thumbnail to Entries

“Call Manager”

→

“Phonebook”

1. Highlight the desired entry.

2. Press [Options] and select “Edit”.

3. Select “Picture”.

4. Select “Assign Picture”.

5. Select the desired picture.

6. Press [Save] when finished.

Note

• If you delete a picture in the handset memory, the

corresponding thumbnail is also deleted.

Viewing My Card

You can register and edit your own information in the Phonebook as with other Phonebook entries.

“Call Manager”

→

“My Card”

(M 8-4)

Copying Phonebook Entries between SIM/USIM Card and Handset

“Call Manager” → “Advanced” → “Copy All Entries”

1. Select “From SIM to Handset” or “From Handset to

SIM”.

48 Call Manager

Note

• When you insert the SIM/USIM card into your phone for the first time and start the Phonebook application, the confirmation screen is displayed automatically, asking you if you wish to copy or not. The number of Phonebook entries to be copied varies depending on the SIM/USIM capacity.

• If the memory space is not enough to save all entries, you cannot complete copying.

Dialling from the Phonebook

“Call Manager” → “Phonebook”

1. Highlight the desired entry and press D.

Tip

• If more than one phone number is registered for the entry, highlight the desired phone number after step 1 and press D.

• You can also dial from the details screen of the Phonebook. On the details screen, select the desired phone number and press D.

Editing Phonebook Entries

“Call Manager” → “Phonebook”

1. Highlight the entry you wish to edit.

2. Press [Options] and select “Edit”.

3. Modify the information.

4. Press [Save] when finished.

Assigning a Ringtone or a Ring Video Clip File to Each Entry

“Call Manager” → “Phonebook”

1. Highlight the desired entry.

2. Press [Options] and select “Edit”, then select

“Assign Tone/Video”.

3. Select “For Voice Call”, “For Video Calling” or

“For New Message”.

4. Select “Assign Tone” or “Assign Video”.

When selecting “Assign Video”, go to step 6.

5. Select “Preset Sounds” or “Sound Gallery”.

6. Select the desired tone or video clip.

7. Press [Save] when finished.

Deleting Phonebook Entries

Deleting All Phonebook Entries

“Call Manager” Entries”

1. Select “Handset Entries” or “SIM Entries”.

2. Enter your handset code.

The default handset code is “9999”. For details on changing the handset code, see “To Change the Handset Code” on page 120.

Deleting a Phonebook Entry

“Call Manager”

1. Highlight the desired entry.

2. Press [Options] and select “Delete”.

→

“Advanced” → “Delete All

→

“Phonebook”

Call Manager 49

Manage Group

Different ringtones can be set for each group. If you do not change a group ringtone, the ringtone assigned in the Settings menu is used.

“Call Manager”

(M 8-2)

→

“Manage Group”

1. Highlight the desired group.

2. Press [Options] and select “Assign Tone/Video”.

3. Select “For Voice Call”, “For Video Calling” or

“For New Message”.

4. Select “Assign Tone” or “Assign Video”.

When selecting “Assign Video”, go to step 6.

5. Select “Preset Sounds” or “Sound Gallery”.

6. Select the desired tone or video clip.

For details on selecting a ringtone or a ring video clip file in the Settings menu, see “Assigning a Ringtone” or “Assigning a Ring Video Clip File” on page 106.

Note

• You can only edit group names in the SIM/USIM

card. You cannot edit the ringtone or ring video settings.

50 Call Manager

Editing the Group Name

You can edit group names to be assigned to the Phonebook entries. First, change the Phonebook displayed (p. 47).

→

“Call Manager”

“Manage Group”

1. Highlight the desired group name.

2. Press [Options] and select “Edit Name”.

3. Modify the name.

Message Groups

You can create a mailing list to send the same message to a group of recipients at once. Up to 5 groups can be registered.

Creating a New Mailing List

“Call Manager” Group”

(M 8-5)

→

“Message Groups” → “Add New

1. Enter the group name.

The new group name is displayed following the last group on the Group List screen.

Adding Recipients to a Group

Up to 20 recipients can be registered in each list.

“Call Manager”

→

“Message Groups”

1. Select the desired group name.

2. Select “Assign New Entry”.

3. Select the desired entry.

The detailed screen is displayed.

4. Select the desired phone number or Email address.

Tip

• If you modify the entry assigned in the group, you

need to reassign it to the group. Press [Options] and select “Re-assign Entry” in step 3.

• To remove an entry from the group, press [Options]

and select “Remove Entry” in step 3.

• To remove a group, highlight a group name and

press [Options] and then select “Delete” in step 1.

Sending a Message Using a Mailing List

→

“Call Manager”

“Message Groups”

1. Highlight the desired group name.

2. Press [Options] and select “Create Message”.

3. Select the desired type of messaging.

For further procedures, see “Creating a New Message” on page 62.

Memory Status

This function helps you to check the memory used in the Phonebook.

“Call Manager”

Speed Dial List

You can set a maximum of 8 phone numbers in the Speed Dial list (p. 26).

Setting Phonebook Entries in the Speed Dial List

“Call Manager”

1. Select the desired entry.

2. Highlight the desired phone number.

3. Press [Options] and select “Add to Speed Dial”.

4. Select the desired location.

Tip

• The nine digit keys correspond to list numbers.

→

“Advanced” → “Memory Status”

(M 8-3)

→

“Phonebook”

Call Manager 51

To Edit the Speed Dial List

“Call Manager”

→

“Speed Dial List”

1. Highlight the entry you wish to edit.

2. Press [Options] and select “Re-Assign” (or

“Assign”).

Sending a Phonebook Entry

“Call Manager” → “Phonebook”

1. Highlight the desired entry.

2. Press [Options] and select “Send Phonebook”.

3. Select “As Message”, “Via Bluetooth” or “Via

Infrared”.

For “As Message”

For details, see “MMS” on page 62.

For “Via Bluetooth”

For details, see “Bluetooth” on page 124.

For “Via Infrared”

For details, see “Infrared” on page 127.

52 Call Manager

Receiving a Phonebook Entry

When the phone receives a Phonebook entry, a confirmation message is displayed in standby.

1. Press [Yes].

The received entry is saved in the Phonebook. Press [No] to reject.

Tip

• For details on entering Infrared or Bluetooth wireless settings, see “Connectivity” on page 124.

Sending a Voice Clip Message or Video Clip Message Using an Address from the Phonebook

“Call Manager” → “Phonebook”

1. Highlight the desired entry including the phone

number or Email address you wish to use.

2. Press [Options] and select “Create Message”.

3. Select “Voice Message” or “Video Message”.

For further procedures, see “Creating a New Message” on page 62.

Camera

Your phone has a b uilt-in digital ca mera that allows you to take pictures and record video clips wherever you are. This section starts with basic functions and operational procedures to take, save and send pictures and video clips, followed by common and unique functions to camera and video modes.

(M 5)

Taking Pictures

“Camera”

1. Press to take the picture.

The shutter sounds and the still image of the taken picture is displayed.

2. Press [Save].

The taken picture is saved in Gallery. To cancel, press [Cancel]. To send the taken picture, press in step 2.

Note

• Press Y instead of in the viewer position of

the display.

• When the video camera is launched, press [Options]

and select “Go to Photo Camera”, or press c or Z (in the viewer position of the display) to go to the photo camera mode.

• When you try to send the picture that has too large a

file size, the picture size is resized for the message. The original sized picture is saved in Gallery.

Tip

• You can activate the camera by long pressing Y. Simply press Y to take pictures, and start and stop recording.

• You can lock the focus by pressing D or pressing Y halfway before taking a picture or recording a

video clip.

Taking a Self-Portrait

You can take a self-portrait while looking at the main display.

“Camera”

1. Press [Options] and select “Switch to Int. Camera”.

Or press H in the viewfinder mode.

2. Press to take the picture.

3. Press [Save].

The taken picture is saved in Gallery. To return to the external camera, press [Options] and select “Switch to Ext. Camera” or press H in the viewfinder mode.

Camera 53

To Take a Picture in the Self-Portrait Position

You can take a self-portrait with the external camera.

1. Rotate the main display 180° clockwise from the

normal position.

2. Press Y on the side of the phone.

Note

• Do not rotate the main display anti-clockwise.

Otherwise, the phone may malfunction.

Exiting from the Camera Mode in the Viewer Position of the Display

1. Long press Z in the viewer position.

Recording Video Clips

You can record a video clip with your phone. You can also use this function in the viewer position of the display.

Recording Video Clips

“Camera”

The preview is displayed on the screen.

1. Press .

Press Y in the viewer position of the display.

2. To stop recording, press .

54 Camera

3. Select “Save”.

The video clip is saved in Gallery. To view the preview before saving, select “Preview”. To send the video clip, select “Save and Send”. Then select the desired way you wish to send. For further procedures, see “Creating a New Message” on page 62.

Note

• You can only send video clips when “For Message”

is selected for the recording time. For details, see “Selecting the Recording Time” on page 60.

Using the Options Menu in the Viewer Position of the Display

1. Press X.

The Options menu is displayed graphically.

2. Press

or W to highlight the desired option and

then press Y to make the selection.

Common Functions in the Photo and Video Camera Modes

Using the Digital Zoom Function

To Adjust the Zooming Ratio

1. In the viewfinder mode, press a or b.

Once the phone has returned to standby, the zoom settings return to default.

To Enable the Optical Zoom

→

“Camera” Zoom”

1. Select “Enable”.

Select “Disable” to disable. If you select “Disable”, you can only use the digital zoom function.

2. Press a or b.

Once the phone has returned to standby, the zoom settings return to default.

[Options] → “Settings” → “Optical

Adjusting the Exposure

“Camera”

→

[Options] → “Exposure”

1. Press a (Bright) or b (Dark).

: (Bright → Normal → Dark)

Once the phone has returned to standby, the brightness settings return to default.

Mobile Light

To Change the Mobile Light Mode

Set the mobile light according to your purpose.

→

“Camera” Light”

[Options] → “Modes” → “Mobile

→

“Switch On/Off ”

1. Select the desired mode.

“On” ( ): The light is always on. “Automatic” ( ): The light turns on if the phone

“Low Light” ( ) (photo camera mode only):

”: The light is always off.

“Off The corresponding indicator is displayed on the screen. Select “Off

detects that the conditions are dark.

Select this mode for macro shooting.

” to turn it off.

Camera 55

To Change the Light Colour

You can take a picture in various colour modes.

“Camera” Light”

→

[Options] → “Modes” → “Mobile

→

“Light Colour”

1. Select the desired light colour.

Light Colours: White/Red/Yellow/Green/Blue/

Using the Self-Timer

Select the appropriate option.

“Camera” (Photo Camera Mode)

“Camera” (Video Camera Mode)

1. Select “On” or “Off

“ ” is displayed on the screen when you select “On”.

Switching between the Photo and Video Camera Modes

You can switch between the camera and video camera modes by pressing c or d, or Z (in the viewer position of the display).

Select the appropriate option.

“Camera” “Camera”

56 Camera

Violet/Light Blue

→

[Options] → “Modes” → “Self-timer”

→

[Options] → “Modes” → “Self-timer”

”.

→

[Options] → “Go to Video Camera”

→

[Options] → “Go to Photo Camera”

Selecting the Picture or Video Quality

Select the appropriate option.

“Camera” “Camera”

→

[Options] → “Picture Quality”

→

[Options] → “Video Quality”

1. Select the desired picture or video quality.

: Super Fine :Fine : Normal

Note

• The better quality you select, the larger file size is

needed.

Selecting the Storage Memory

Select the appropriate option.

→

“Camera” Pictures”

“Camera” Videos”

[Options] → “Settings” → “Save New

→

[Options] → “Settings” → “Save New

1. Select the desired location from “To Handset

Memory”, “To Memory Card” or “Choice”.

Note

• If you select “Choice”, select the desired location

every time you save.

Focus Setting

“Camera”

→

[Options] → “Modes” → “Focus”

1. Select the desired option.

: Auto Focus : Manual Focus :Macro

Auto Save

You can set the phone to save pictures and video clips automatically.

→

“Camera”

1. Select “On” or “Off

Auto Start

You can set the phone to start the camera application automatically by switching to the viewer position of the display.

“Camera”

1. Select “On” or “Off

Using the Help Function

“Camera”

[Options] → “Settings” → “Auto Save”

→

[Options] → “Settings” → “Auto Start”

→

[Options] → “Help”

”.

Common Shortcut Keys

If multiple options exist, they switch each time you press each following key.

Photo Camera Video Camera

a Zoom In b Zoom Out c Go to Photo Camera

R Light On/Off Mobile Light P Exposure

D Focus Lock G Zoom Max/Min H Ext./Int. Camera I Focus J Save to K Picture Size L Scene Microphone M Picture Quality Video Quality N Self-timer O Light Colour Q Switch Viewfinders Switch Screens

Go to Video

Camera

Camera 57

Note

• The “Switch Screens” option is available in

“Preview” before you save a video clip. See “Recording Video Clips” on page 54.

Functions in the Photo Camera Mode

Selecting the Picture Size

You can select the size of pictures. All taken pictures are saved in the JPEG format.

→

“Camera”

1. Select the desired size.

(External Camera) 1536 × 2048 dots/1200 × 16 00

(Internal Camera) 240 × 320 dots/120 × 160 dots

Selecting the Scene

You can sele ct the appropriate mode by s cene when you take the picture.

“Camera”

1. Select the desired scene.

The following eight modes are available: “Automatic” ( ): Automatically adjusted to

58 Camera

[Options] → “Picture Size”

dots/960 × 1280 dots/ 768 × 1024 dots/480 × 640 dots/ 240 × 320 dots/120 × 160 dots

→

[Options] → “Modes” → “Scene”

surroundings.

“Night” ( ): Suited for night

“Sports” ( ): Suited for moving objects. “Characters” ( ): Suited for high-contrast

“Pet” ( ): Suited for moving objects at

“Against Sun” ( ): Suited for avoiding objects

“Portrait” ( ): Suited for a portrait. “Portrait in Dark” ( ):

Selecting the Picture Effects

You can take a picture with special effects.

→

“Camera” Effects”

[Options] → “Modes” → “Camera

photography.

subjects such as text.

short range.

being silhouetted against t he light.

Suited for a portrait indoors or in dim light.

1. Select the desired effects.

The following five modes are available: “Off

”: The camera effect is cancelled.

“Sepia”: Creates a sepia-tone image.

“Monochrome”: Creates a black and white image. “Negative”: Creates a negative image. “Sketch”: Creates a sketch-like image with

Note

• You cannot use the Camera Effects function for

picture sizes larger than 480

Continuous Shoot

You can take continuous shoots in various options.

“Camera” Shoot”

→

contours of objects outlined.

640 dots.

[Options] → “Modes” → “Continuous

1. Select the desired mode.

The following continuous shoot modes are available:

”: The continuous shoots are

“Off

“4 Pictures”/“9 Pictures” ( / ):

“Overlapped” ( ): Overlaps continuous pictures

cancelled.

Takes 4 or 9 pictures continuously. After selecting this mode, select from five types of speed or “Manual”.

into one picture and makes an afterimage.

After selecting this mode,

“Bracket” ( ): Takes 9 continuous pictures

Note

• When you select “Manual” to take continuous

pictures, press (or Y in the viewer position of the display) manually in the desired speed.

• When the Timer and Continuous Shoot functions are

simultaneously set, “ ” (for “4 Pictures”, for example) is displayed instead.

• You cannot use the Continuous Shoot function for

picture sizes larger than 768 Pictures”, “Overlapped”, “Bracket” and “Very Fast” for “4 Pictures” are not available for picture sizes larger than 480

select “Fast” or “Normal”.

with various colours and brightness levels. After selecting this mode, press then select “Fast” or “Normal”.

1024 dots. “9

640 dots.

Camera 59

Selecting a Frame

You can select the frame from preset patterns or Picture Gallery.

→

“Camera”

[Options] → “Modes” → “Add Frame”

1. Select “Preset Frames” or “Picture Gallery”.

2. Select the desired frame.

The selected frame is confirmed on the display.

3. Press .

Note

• Images larger than 240

Using the Full Screen

You can display the preview on the full screen without the soft key area and indicator area.

→

“Camera”

[Options] → “Settings”

320 dots cannot be used.

1. Select “Full Viewfinder”.

To return to the normal viewfinder, select “Normal Viewfinder”.

Selecting the Shutter Sound

→

“Camera” Sound”

[Options] → “Settings” → “Shutter

1. Select the desired shutter sound from 3 preset

patterns.

60 Camera

Note

• Continuous Shoot uses the specialised shutter sound

that cannot be changed from the above settings.

• The shutter sound remains active even when “Ringer

Volume” (p. 105) is set to “Silent” to prevent unauthorised use.

Functions in the Video Camera Mode

Selecting the Recording Time

“Camera”

1. Select “For Message” or “Extended Video”.

2. Select “Large(QCIF)” or “Small(SubQCIF)”

→

[Options] → “Record Time”

For Message ( ):

Extended Video ( ):

picture size for “For Message” and “QVGA(3gp)”, “QVGA(asf)”, “Large(QCIF)” or “Small(SubQCIF)” picture size for “Extended Video”.

Limits the size to send a message depending on service providers.

Less than 30 minutes (depending on the memory).

Note

• The display cannot be rotated while recording video

clips. Recording will end if you rotate the display.

• If you select “For Message” for the recording time,

the file size is limited depending on the service provider.

• “Save and Send” is not displayed after recording in

the Extended Video mode.

Recording Video Clips with the Sound

To record a video clip with the sound, the microphone needs to be activated.

→

“Camera” “Microphone”

1. Select “On” or “Off

Note

• The microphone is already turned on in the default

setting. Select “Off the sound.

• The file size of a video clip can be reduced if the

sound is not recorded.

Video Encoding

“Camera” Encode”

[Options] → “Settings” →

”.

” to record a video clip without

→

[Options] → “Settings” → “Video

1. Select the appropriate format.

Camera 61

Messages

Your phone allows you to send and receive text, multimedia and Email, and receive WAP alerts as well.

(M 4)

SMS

SMS allows you to send text messages up to 765 characters long. If you send a message of more than 160 characters, it is split into several segments.

MMS

MMS allows you to send and receive multimedia messages of up to 300 KB with images, sound, or video clips attached.

Email

Email allows you to send messages of up to 300 KB.

Note

• Some MMS functions may not always be available

depending on your network. Contact your network operator for more information.

• Maximum message size varies depending on the

settings by the network operator.

62 Messages

Creating a New Message

(SMS/MMS)

→

“Create Message” → “Message”

A (Email) A

→

“Create Message” → “E-mail”

(M 4-1)

1. Select the address field.

2. Select the desired method to enter the address.

3. For MMS, enter or select the Email address or

phone number from the Phonebook list. For SMS, enter or select a phone number. For Email, enter or select an Email address.

• To add multiple Email addresses or phone numbers, highlight the recipient field, press [Options], select “Edit Recipients”, then select “Phonebook”. Ente r or select the Email address or phone number from the existing Phonebook.

• To change the recipient types, press [Options], select “Edit Recipients”, then select “Change to CC” or “Change to BCC”.

• To add a subject, press [Options] and select “Add Subject”.

4. Place the cursor in the message field.

5. Enter the message.

6. Highlight the “Send” indicator in the lower left of

the screen. Press and select “Send Message”. After the message is sent, the message is moved to

the Sent box.

Tip

• To send the same message to a group of recipients,

select “Select Group” in step 2, then select the desired group name. For details on creating a mailing list, see “Creating a New Mailing List” on page 50.

To Add a Slide Show

1. In step 5 in “Creating a New Message” on page 62,

press [Options] and highlight the “Other” indicator in the lower part of the screen, press and select “Add Slide”. If you wish to add more slides, select “Add Slide Before” or “Add Slide After”.

2. Enter the message.

If you wish to set the duration of each slide, press [Options] and select “Slide Duration”, then select the desired duration.

Tip

• You can create messages up to 300 KB. Each slide

can contain one picture and/or one sound file or video clip.

To Remove or Replace Attachments

1. In step 5 in “Creating a New Message” on page 62,

press [Options] and select the corresponding remove option for each attachment.

To Attach Gallery Data

1. In step 5 in “Creating a New Message” on page 62,

highlight the “Picture”, “Sound” or “Video” indicator in the lower centre of the screen, and press

2. Select “Saved Picture Gallery”, “Saved Sound

Gallery” or “Saved Video Gallery”.

3. Select the desired file.

If you wish to take new pictures, record sounds or video clips, select “Take Picture”, “Record Sound” or “Record Video”.

• For attached pictures, select the appropriate resize

option, as the maximum message size for sending varies depending on the network operator.

Messages 63

To Attach a Phonebook Entry

1. In step 5 in “Creating a New Message” on page 62,

highlight the “Others” indicator in the lower right of the screen. Press “Insert Item” and select “Attach Phonebook”.

2. Select the desired entry.

If you wish to select your own Phonebook entry, select “My Card”.

3. Select the desired field.

The selected information is entered.

To Attach a Schedule Entry

1. In step 5 in “Creating a New Message” on page 62,

highlight the “Others” indicator in the lower right of the screen. Press “Insert Item” and select “Attach Appointment”.

2. Select the desired day including a schedule entry

you wish to add.

3. Select the desired schedule entry.

To Remove or Replace Attachments

1. In step 5 in “Creating a New Message” on page 62,

press [Options] and select the corresponding remove option for each attachment.

64 Messages

Using the Sending Options

You can use the message sending options for each type of message.

Highlight the “Send” indicator in the lower left of the screen. Press and select “Messaging Settings”.

• “Read Report” (“On”, “Off ”) (MMS): Confirms whether or not a report is sent notifying the sender that the message has been read.

• “Delivery Report” (“On”, “Off Enables or disables Delivery Report when the message is successfully sent to the recipient.

• “Expiry Time” (“Maximum”, “30 minutes”, “1 hour”, “6 hours”, “1 day”, “1 week”) (SMS/ MMS): Sets Expiry Time for a message to be saved in the server.

• “Priority” (“High”, “Normal”, “Low”): Prioritises composed messages.

• “Delivery Time” (“No delay”, “30 minutes”, “1 hour”, “6 hours”, “1 day”, “1 week”) (MMS): Sets the time the message is delivered after the Send key is pressed.

”) (SMS/MMS):

2. Highlight the “Send” indicator in the lower left of

the screen. Press and select “Send”. After the message is sent, the message is moved to

the Sent box.

Note

• The current message size displayed while you are

creating the message is an approximation.

• If a message cannot be sent for some reason, the

message stays in the Outbox and the “ ” is displayed in standby.

Tip

• To save the message without sending, press [Send]

and select “Save to Drafts” in step 5 in “Creating a New Message” on page 62.

• You can send the following items attached to

multimedia messages. Details are given in the following sections.

• Gallery data

• Phonebook entry

• File (Schedule entry created by Calendar,

Phonebook entry), etc.

• You can use the template option to help you compose

messages. For details on using this option, see “Using Templates” on page 45.

Sending a Message in the Drafts Box

→

“Drafts”

(M 4-4)

1. Select the desired tab, SMS/MMS or Email.

2. Press [Options] and select “Edit”.

3. Modify the message, if necessary.

4. Highlight the “Send” indicator in the lower left of

the screen. Press and select “Send”.

Reading Message

Messages you receive are saved in the Inbox.

→

“Inbox”

1. Select the message you wish to view.

Storing the Phone Number of a Sender in the Phonebook

→

“Inbox”

1. Highlight the message from which you wish to store

the phone number or Email address.

2. Press [Options] and select “Save Address”.

The new Phonebook entry screen including the phone number is displayed. For details on creating a new Phonebook entry, see “Add New” on page 47.

Messages 65

Calling the Phone Number of a Sender Embedded in the Message

→

“Inbox”

1. Highlight the message including the phone number

you wish to dial.

2. Press [Options] and select “Call Sender”.

Downloading a Single MMS

→

“Inbox”

1. Highlight the message alert ( ) you wish to

download.

2. Press [Options] and select “Download”.

Tip

• You can download multiple messages at the same

time. See “Downloading Multiple MMS”.

Downloading Multiple MMS

→

“Inbox”

1. Press [Options] and select “Advanced”.

2. Select “Multiple Select”.

3. Select the desired message alert using the “Select”

or “Select All” option.

66 Messages

4. Select “Download”.

The selected messages are downloaded at the same time.

Replying to a Message or to All Addresses

→

“Inbox”

1. Highlight the message the sender of which y ou wish

to reply to.

2. Press [Options] and select “Reply” or “Reply all”.

3. Select “Reply” or “Reply with History”.

4. Enter the message.

5. Highlight the “Send” indicator in the lower left of

the screen. Press and select “Send”.

Forwarding a Message

→

“Inbox”

1. Highlight the message you wish to forward.

2. Press [Options] and select “Forward”.

3. Perform steps 1 to 5 in “Creating a New Message”

on page 62.

Sorting the Messages in the List

→

“Inbox”

1. Press [Options] and select “Advanced”.

2. Select “Sort”.

3. Select the desired sort type.

Locking or Unlocking the Messages

→

“Inbox”

1. Highlight the message you wish to lock or unlock.

2. Press [Options] and select “Advanced”.

3. Select “Lock” or “Unlock”.

Cell Broadcasts

You can receive cell broadcast messages or general messages such as weather forecasts and traffic reports. This information is broadcast to subscribers in certain network areas.

This function may not be available on all mobile phone networks. Contact your network operator for more information.

Enabling/Disabling Cell Broadcasts

→

“Cell Broadcasts” → “Switch On/Off ”

1. Select “On” or “Off

(M 4-9)

”.

Reading Cell Broadcast Messages

→

“Cell Broadcasts” → “Read Messages”

1. Select the desired subject.

2. Scroll the screen to read the message.

3. Press [Back].

Setting Languages for Cell Broadcast Messages

→

“Cell Broadcasts” → “Settings” →

“Language”

The current language is displayed.

1. Press .

2. Press to check.

3. Press [Save].

Subscribing to Cell Broadcasts

Select the page of the cell broadcast message that you want.

→

“Cell Broadcasts” → “Settings” → “Set Info

A Subjects”

→

[Options]

1. Select the desired page.

2. Select “Options”.

3. Select “Add/Remove”.

4. Press [Back].

Messages 67

Tip

• If the desired page is not in the list that appears in

step 2, select “Create Subject” in step 1, then enter the subject code to add a page. For details on the subject code, contact your service provider.

Area Info

The Area Info is the message information that operators send to subscribers in certain areas.

When you receive Area Info, the message (area code) is displayed in standby.

Enabling/Disabling Area Info

→

1. Select “On” or “Off

Note

• This function may not be available on all mobile

phone networks. Contact your network operator for more information.

• If Area Info is set to “On”, the standby time will

decrease.

68 Messages

(M 4-10)

“Area Info”

”.

Messaging Settings

General Settings

→

“Messaging Settings” → “General Settings”

(M 4-11)

1. Select the item you wish to set up.

• “Home Download”:

Controls message download timing inside your network area.

“Always Download”: Downloads messages

“Always Defer”: Defers message

• “Roaming Download”:

Controls message download timing when roaming outside of your network.

“Always Download”: Downloads messages

“Always Defer”: Defers message

• “Delivery Report”:

Enables or disables Delivery Report request.

• “Read Report”:

Enables or disables Read Report request.

immediately from the server.

download.

immediately from the server.

download.

• “Expiry Time”: This indicates the number of days and hours for which a message you send may remain undelivered to the message recipient. During this period, the message service centre will continually try to deliver the message to the recipient.

• “Delivery Report Allow”: Confirms whether or not a report is sent notifying the sender when you receive an MMS/SMS.

• “Read Report Allow”: Enables or disables Read Report Allow when the recipient is required to inform the sender that the message has been read.

• “Edit Signature”: Opens the screen to enter the signature.

• “Auto Delete”: Deletes the oldest message automatically, when the Inbox, Sent or both (Inbox and Sent) is full.

• “Automatic Resend”: Tries to resend the failed SMS/MMS message up to two times (“On” or “Off

” selection).

• “Message List View”: Switches the mailbox listing between “One-line View” and “Two-line View”.

SMS Settings

→

“Messaging Settings” → “SMS Settings”

1. Select the item you wish to set up.

• “Message Centre”: Enter the message centre number.

If you wish to enter a country code for a message to an international number, long press Q until a + sign is displayed.

• “Message Format”: Select the message format to be used when creating a new message.

• “Reply Path”: Accepts or rejects the same reply path with the send path when receiving the reply message for your message.

Messages 69

MMS Settings

→

“Messaging Settings” → “MMS Settings”

1. Select the item you wish to set up.

• “MMS Accounts”: Select the desired account or select “Create New” to enter the following settings.

“Profile Name”: MMS profile name

“Proxy”: Proxy setting for MMS “Relay Server URL”: MMS relay server

• “Slide Duration”: Sets the duration of the slide.

• “Max Message Size”: Defines the maximum size of downloaded and created MMS messages.

• “Creation Mode”: When set to “Free”, you can attach files of any format to the mail. When set to “Restricted”, only certain formats and message sizes can be attached. The “Restricted” setting has priority over “Max Message Size”.

70 Messages

(Unique name)

Email Settings

→

“Messaging Settings” → “Email Settings”

1. Select the item you wish to set up.

• “Email Accounts”: Select the d esired account or select “C reate New” to enter the following settings. “Account Name”: E mail account name (Unique

“POP3 Server”: Server name, user ID,

“SMTP Server”: Server name, user ID,

“Access Point”: Access point for Email “Email Address”: Email address

• “Download Interval”: Sets the download interval.

• “Max Message Size”: Defines the maximum size of downloaded and created MMS messages.

Note

• The phone only supports text format Emails.

Characters displayed in HTML format may not appear correctly.

name)

password and port number for POP3 server

password, port number for SMTP server and SMTP Authentication

FET Mobile Internet

Your phone is alrea dy configured to access FET Mobile Internet.

FET Mobile Internet is a new mobile internet portal which is your gateway to a new world of information, games, music and services.

Because your phone uses 3G (UMTS), it has a system that is faster than previous ways of getting mobile information. Also, the connection is ‘always on’ which means there is no need to wait for dialling up. You only have to pay for the data you send or receive, not how long you’re connected.

Your phone contains a WAP browser used for surfing on the Mobile Internet, where you can get a lot of useful information. Normally, pages are designed for a mobile phone.

Your phone is already setup to FET Mobile Internet site for WAP/MMS Settings.

(M 2)

Main Menu

→

“FET Mobile Internet”

The FET Mobile Internet service page is displayed.

“FET Mobile Internet”

The URL entry screen is displayed, allowing you to jump to a site.

“FET Mobile Internet”

See page 72.

“FET Mobile Internet”

WAP Push alerts are displayed.

“FET Mobile Internet”

The saved screenshots are displayed.

“FET Mobile Internet”

The history of pages you have recently browsed is displayed.

“FET Mobile Internet”

See page 74.

“Homepage”

→

“Go to URL”

→

“Bookmarks”

→

“Alert Inbox”

→

“My Saved Page”

→

“Access History”

→

“Browser Settings”

FET Mobile Internet 71

Navigating a WAP Page

• a b c d:

Move the highlights around in the screen.

• : Executes the option displayed in t he lower centre of the screen.

• A: Launches the browser option menu.

• C: Selects an action displayed in the lower right of the screen. Used to access “FET Mobile Internet” by opening the browser.

• F (short press): Exits the browser.

(long press):

Turns off the phone.

72 FET Mobile Internet

Editing Bookmarks

“FET Mobile Internet” → “Bookmarks”

1. Select the desired URL, and press [Options].

You can edit the list of Bookmarks by the following options: “Open”: Selects a bookmark. “Details”: Displays detailed

information of the WAP page.

“Send page”: Sends the URL address to

recipients.

“New”: Creates new folders or

bookmarks. “Rename”: Renames bookmarks. “Edit URL”: Edits URL address of the

bookmark. “Move”: Moves bookmarks to

another location. “Delete”: Deletes bookmarks. “Delete All”: Deletes all bookmarks.

The Browser Options

You can use various options of the WAP browser.

→

[Options]

“Select”: Selects a WAP page. “Home”: Goes to the homepage. “Alert Inbox”: Displays WAP Push alerts. “Bookmarks”: (see “Editing Bookmarks”

on page 72.)

“Mark Page”: Marks the selected WAP

page. “Save This Link”: Save the selected link. “Save Items”: Saves items from WAP

pages. “Go to URL”: Goes to the WAP page that

you enter the URL address. “Access History”: Shows the history where

you have browsed. “Reload Page”: Reloads the WAP page

again to get new

information. “Advanced”: Displays the advanced

menus. “Exit”: Exits the browser.

The Advanced Options

→

[Options] → “Advanced”

“My Saved Page”: Displays the bookmarked

pages.

“Save This Page”: Saves the WAP page as the

local file. “Send Page”: Sends the WAP page data. “Details”: Shows detailed information

of the WAP page. “Browser Data”: Edits the browser data. You

can clear the cache/cookies/

history. “Search This Page”: Searches specific words in

the WAP page. “Copy Text”: Copies the text on the web

page. “Browser Settings”: Displays the Settings

menus. “Restart Browser”: Restarts the browser. “About”: Displays the browser

information.

FET Mobile Internet 73

Browser Settings

“FET Mobile Internet” → “Browser Settings”

“Font Size”: Sets the size of the br owsing

“Scroll Step”: Sets the speed of scrolling. “Send Referrer”: Enables or disables the

“Cookies”: Adjusts the setting of

“Downloads”: Disables downloading data

“Security”: Adjusts the security prompt

“WAP Push”: Sets whether you need

“Download to”: Sets the download location.

74 FET Mobile Internet

(M 2-7)

font.

notification of the referrer.

cookies.

from the images/sounds/ objects.

level.

confirmation for push message.

Media Player

Media Player can play sound files and video clip files.

TV & Video

Playing Back Video Clip Files

“Media Player”

(M 7)

(M 7-1)

→

“TV & Video” → “Video Gallery”

1. Select “Handset Memory” or “Memory Card”.

2. Select the desired file.

To pause playback, press . To stop playback, press [Back].

Tip

• You can control the Video Player by using the

following keys:

a/b: Increases or decreases the volume. b (long press): Mutes. d: Jumps to the next file. c: Returns to the top portion of the current file. d (long press): Fast-forwards. c (long press): Rewinds.

Searching a File to Be Played Back

→

“Media Player”

“TV & Video” → “Video Gallery”

1. Select “Handset Memory” or “Memory Card”.

2. Select “All Videos” or the desired playlist.

3. Press [Options] and select “Search”.

4. Enter the first few letters of the title.

Search results are displayed and the matching file is highlighted.

Adding a File to the Playlist

You can create a playlist registering desired files.

→

“Media Player”

“TV & Video” → “Video Gallery”

1. Select “Handset Memory” or “Memory Card”.

2. Select “All Videos” or the desired playlist.

3. Highlight the file you wish to add to the playlist.

4. Press [Options] and select “Add to Playlist”.

The playlists are displayed. For details on creating a playlist, see “Adding a New Playlist” on page 76.

5. Select the desired folder.

6. Press .

The file highlighted in step 3 is saved. To delete files from the playlist, highlight the playlist and press [Options]. Then select “Delete from Playlist”.

Media Player 75

Adding a New Playlist

“Media Player”

→

“TV & Video” → “Video Gallery”

1. Select “Handset Memory” or “Memory Card”.

2. Press [Options] and select “Add New Playlist”.

3. Enter the desired playlist name.

4. Press .

Note

• To delete the playlist, highlight the playlist and press

[Options]. Then select “Delete Playlist”.

Editing the Video Clip File

→

“Media Player”

“TV & Video” → “Video Gallery”

1. Select “Handset Memory” or “Memory Card”.

2. Select “All Videos” or the desired playlist.

3. Select the file you wish to edit.

4. Press [Options] and select “Edit”.

5. Select the desired option.

“Crop”: Select the desired area to be cropped. “Subtitle”: Create a subtitle to add to the file.

76 Media Player

Settings

You can select a play mode for “Playback Pattern”, “Backlight” and “Display Size” when playing back video clip files.

→

“Media Player”

“TV & Video” → “Video Gallery”

1. Select “Handset Memory” or “Memory Card”.

2. Select “All Videos” or the desired playlist.

3. Select the file for which you wish to adjust the play

mode.

4. Press [Options] and select “Settings”.

5. Select “Playback Pattern”, “Backlight” or “Display

Size”.

6. Select from the following:

• “Playback Pattern” “Normal”: Plays back all files in the

“Repeat”: Continues playback in the

“Repeat All”: Plays back all files in the

“Random”: Plays back files in the selected

selected folder once and stops playback.

selected folder.

folder at random.

• “Backlight” “Always On”: Lit while the file is played

“Always Off

“Normal Settings”:

• “Display Size” “Original Size”: Displays the file in its original

“Enlarge”: Displays the file in an

“Full Screen”: Displays the file on the full

SD VIDEO

Video clips that are recorded by a video camera or downloaded from mobile Internet sites can also be managed with SD VIDEO.

“Media Player”

back.

”: Unlit while the file is played

back even if a key is pressed.

Works with the main backlight setting (p. 110).

size.

enlarged size.

screen.

→

“TV & Video” → “SD VIDEO”

1. Select the desired file.

To pause playback, press . To stop playback, press C. To delete files from the playlist, highlight the playlist, press [Options] and select “Delete”.

Downloading Video Clip Files

→

“Media Player” Videos”

The video clip file download site is displayed.

Music Player

You can play back MP3, AAC and AAC+ format sound files with Music Player. While playing back sound files in the background, you can use other menus.

Playing Back Sound Files

“Media Player”

“TV & Video” → “Download

(M 7-2)

→

“Music Player” → “My Music”

1. Select “All Music” or the desired playlist.

2. Select the desired file.

To pause playback, press . To stop playback, press F [End].

Note

• You are asked whe ther or not to play sounds when the

Silent mode is activated.

• To play the last played file, select “Last Played

Music”. “Currently Playing” is displayed when the file is being played back.

• If the file names of your sound files include Chinese

characters, some characters may not appear correctly in Music Player.

Media Player 77

• MP3/AAC/AAC+ Specifications

MP3: Supports 48KHz/192kbps or less AAC: Supports 48KHz/128kbps or less

: Supports 44.1KHz/48kbps or less

AAC Due to the quality, some MP3 files may not be successfully played back even if they are within the specifications above.

• You can play back MP3, AAC and AAC

sound files with Music Player but file formats other than .mp3, .mp4, .3gp are not supported.

Tip

• You can return to the Main menu screen while

playing back the file in the background.

• You can create your playlist by selecting only the

desired files (p. 79).

• You can make tone adjustment in step 2. Press

[Options] and select “Tone Control”. Select “Normal”, “Bass”, “Surround” or “Surround Bass”.

• You can select the playback pattern in step 2. Press

[Options] and select “Playback Pattern”. “Normal”: Plays back all files in the selected

folder once and stops playback.

“Repeat”: Continues playback in the selected

folder.

“Repeat All”: Plays back all files in the selected

folder.

78 Media Player

format

“Random”: Plays back f iles in the selected folder

• You can control the Music Player by using the

following keys:

a/b: Increases or decreases the volume. b (long press): Mutes. d: Jumps to the next file. c: Returns to the top portion of the current file. d (long press): Fast-forwards. c (long press): Rewinds. F: Plays back the file in the background.

Searching a File to Be Played Back

“Media Player”

at random.

→

“Music Player” → “My Music”

1. Select “All Music” or the desired playlist.

2. Press [Options] and select “Search”.

3. Enter the first few letters of the title.

Search results are displayed and the matching file is highlighted.

Adding a File to the Playlist

You can create a playlist registering desired files.

“Media Player”

→

“Music Player” → “My Music”

1. Highlight the file you wish to add to the playlist.

2. Press [Options] and select “Add to Playlist”.

The playlists are displayed. For details on adding a playlist, see “Adding a New Playlist”.

3. Select the desired folder.

4. Press .

The file highlighted in step 1 is saved. To delete the playlist, highlight the playlist and press [Options]. Then select “Delete Playlist”.

Adding a New Playlist

→

“Media Player”

“Music Player” → “My Music”

1. Press [Options] and select “Add New Playlist”.

2. Enter the desired playlist name.

3. Press .

Downloading Music Files

“Media Player” Music”

The music file download site is displayed.

Note

• This service is not available with some service

providers. Please contact your service provider for more information.

→

“Music Player” → “Download

Media Player 79

Gallery

Gallery contains several types of picture, sound and video clip data. Also included in Gallery are frequently used text message phrases and accessed WAP pages (addresses) which you can use. You can also transmit picture, sound and video clip data via infrared or Bluetooth wireless technology to OBEX-enabled phones.

Picture Gallery

Pictures that are taken by a digital camera or images that are downloaded from mobile Internet sites can be managed. You can register pictures in the following formats: JPEG, PNG, WBMP and GIF.

Viewing Pictures

“Gallery”

(M 6)

(M 6-1)

→

“Picture Gallery”

1. Select the file you wish to view.

The selected picture is displayed.

Switching the Memory Source

→

“Gallery”

“Picture Gallery”

1. Select the file you wish to view.

The selected picture is displayed. To display the list from the memory card, press d. To go back to the handset memory, press c.

80 Gallery

Using Images as Wallpaper

“Gallery” → “Picture Gallery”

1. Highlight the file you wish to use as wallpaper.

2. Press [Options] and select “Set as Wallpaper”.

Saving an Image to Phonebook Entries

You can use this option only for pictures saved in the handset memory.

→

“Gallery”

“Picture Gallery”

1. Highlight the file you wish to add to Phonebook.

2. Press [Options] and select “Save to phonebook”.

To overwrite, select the data you wish to save. To save as a new entry, select “As New”. For details on entering a name, see “Add New” on page 47.

Editing Pictures

“Gallery”

→

“Picture Gallery”

1. Highlight the file you wish to edit.

2. Press [Options] and select “Picture Editor”.

3. Select the desired option.

Note

• “Picture Editor” may not be available depending on

the original picture and copyright issued.

Adjusting the Size

You can adjust the picture to an appropriate size depending on the scene.

→

“Gallery”

“Picture Gallery”

1. Highlight the file you wish to adjust the size of.

2. Press [Options] and select “Resize”.

3. Select the desired option.

Note

• “Resize” may not be available depending on the

original picture and copyright issued.

Tip

• For other option menus, see “Common Option

Menus” on page 83.

Downloading Picture Files

→

“Gallery”

The picture file download site is displayed.

Video Gallery

Video clips that are recorded by a video camera or video clips that are downloaded from mobile Internet sites can be managed.

Playing Back Video Clip Files

“Gallery”

“Picture Gallery” → “Download More”

(M 6-2)

→

“Video Gallery”

1. Select the file you wish to play back.

2. Press .

To pause playback, press . To resume, press again. To stop playback, press [Back]. To display the list from the memory card, press d. To go back to the handset memory, press c.

Gallery 81

Using a Video Clip as a Ring Video

You can set your video clip to play back when the phone rings.

→

“Gallery”

“Video Gallery”

1. Highlight the desired video clip.

2. Press [Options] and select “Set as Ring Video”.

Tip

• For other option menus, see “Common Option

Menus” on page 83.

Downloading Video Clip Files

→

“Gallery”

The video clip file download site is displayed.

Sound Gallery

The downloaded sound files and the AMR data recorded by Voice Recorder are managed in Sound Gallery. The default ringtones are not contained within Sound Gallery. Only the sound files you can play back with the phone are stored in Sound Gallery.

Playing Back Sound Files

“Gallery”

“Video Gallery” → “Download More”

(M 6-4)

→

“Sound Gallery”

1. Select the file you wish to play back.

To stop playback, press .

82 Gallery

Note

• This option may not be available in all regions.

Switching the Memory Source

“Gallery”

→

“Sound Gallery”

1. Press d.

The tab switches and the list is displayed from the memory card. To go back to the handset memory, press c.

2. Select the desired sound file.

Using the Sound Files as a Ringtone

“Gallery”

→

“Sound Gallery”

1. Highlight the file you wish to use as a ringtone.

2. Press [Options] and select “Set as Ringtone”.

Note

• AMR format music files cannot be used for ringtones.

Tip

• For other option menus, see “Common Option

Menus” on page 83.

Common Option Menus

Activating Files with Copyright Protection (DRM)

Some pictures, sound files, and video clips have a digital copy protection program, which is called DRM (Digital Rights Management). You need to activate the digital licence permission to open the files. Files protected with DRM are displayed with .

Select the appropriate option.

→

“Gallery” “Gallery” “Gallery” “Gallery”

“Picture Gallery”

→

“Video Gallery”

→

“Sound Gallery”

→

“Other Documents”

1. Highlight the file you wish to activate.

2. Press [Options] and select “Activate”.

Note

• Some pictures with DRM may not open even when an

attempt is made to activate it.

Sending Gallery Data

Select the appropriate option.

→

“Gallery” “Gallery” “Gallery” “Gallery”

“Picture Gallery”

→

“Video Gallery”

→

“Sound Gallery”

→

“Other Documents”

1. Highlight the desired file.

2. Press [Options] and select “Send”.

3. Select “As Message”, “Via Bluetooth” or “Via

Infrared”. For details on creating a message, see “Creating a

New Message” on page 62. For details on Bluetooth wireless settings, see “Bluetooth” on page 124. For details on Infrared settings, see “Infrared” on page 127.

Gallery 83

Note

• Pictures/Sounds/Video clips protected by copyright

cannot be sent attached to a message, with the exception of Separate Delivery files.

• When pairing, you need to enter your passcode when

establishing contact with a Bluetooth wireless technology enabled device for the first time.

Receiving Gallery Data

When the phone receives Gallery data, a confirmation message is displayed in standby.

1. Press [Yes].

The received data is saved in the corresponding Gallery folder.

Tip

• For details on Infrared or Bluetooth wireless

settings, see “Connectivity” on page 124.

84 Gallery

Using Gallery Data

You can copy, move, sort, rename, and delete the saved Gallery data.

Select the appropriate option.

→

“Gallery” “Gallery” “Gallery” “Gallery”

“Picture Gallery”

→

“Video Gallery”

→

“Sound Gallery”

→

“Other Documents”

1. Highlight the desired file.

2. Press [Options] and select “Advanced”.

3. Select the desired option.

“Move”: Moves files to another folder.

“Copy”: Copies files. Select the desired

“Create Folder”: Creates a new folder. “Multiple Select”: Selects multiple files. “Sort”: Sorts the file. Select the desired

Select the desired folder to move to.

folder to copy to.

files to sort.

To Rename the File

Select the appropriate option.

“Gallery” “Gallery” “Gallery” “Gallery”

→

“Picture Gallery”

→

“Video Gallery”

→

“Sound Gallery”

→

“Other Documents”

1. Highlight the desired file.

2. Press [Options] and select “Rename”.

To Delete the File

“Gallery” “Gallery” “Gallery” “Gallery”

→

“Picture Gallery”

→

“Video Gallery”

→

“Sound Gallery”

→

“Other Documents”

1. Highlight the desired file.

2. Press [Options] and select “Delete”.

To See the Gallery Details

Select the appropriate option.

→

“Gallery” “Gallery” “Gallery” “Gallery”

“Picture Gallery”

→

“Video Gallery”

→

“Sound Gallery”

→

“Other Documents”

1. Highlight the file you wish to view the details of.

2. Press [Options] and select “Details”.

Selecting Multiple Files

You can select more than one item from Gallery for moving, copying and deleting.

Note

• The following procedure applies when the entries

other than “Download More” are highlighted.

Select the appropriate option.

→

“Gallery” “Gallery” “Gallery” “Gallery”

“Picture Gallery” → [Options]

→

“Video Gallery” → [Options]

→

“Sound Gallery” → [Options]

→

“Other Documents” → [Options]

1. Select “Advanced”.

2. Select “Multiple Select”.

3. Press to check the desired file names.

4. Press [Options] and select the desired option.

Tip

• To remove the check, select the file again or select

“Unselect” in step 4.

• If you wish to select all files, select “Select All” in

step 4. To unselect all, select “Unselect All”.

Gallery 85

Text Templates

You can register up to 50 text templates for use in text messages and multimedia messages. The maximum capacity of the text templates is 100 KB.

Adding Phrases to Text Templates

→

“Gallery” Template”

“Text Templates” → “Add New

(M 6-6)

1. Enter the text and press .

Editing Text Templates

“Gallery”

→

“Text Templates”

1. Highlight the text template you wish to edit.

2. Press [Options] and select “Edit”.

To view the text template, press [Options] and select “View”. To delete the text template, press [Options] and select “Delete”.

3. Modify the text and press .

86 Gallery

Sending Text Templates

“Gallery”

→

“Text Templates”

1. Highlight the text template you wish to send.

2. Press [Options] and select “Send Template”.

Memory Status

This function helps you to check the memory status of the handset memory or memory card. Memory status covers the following.

Handset Memory: Applications, Pictures, Videos,

Memory Card: Pictures, Videos, Sounds, Others,

“Gallery”

→

(M 6-8)

Sounds, Others, Total and Free

Total and Free

“Memory Status”

1. Select “Handset Memory” or “Memory Card”.

Java™

Java™ Gallery

The list of Java™ applications is displayed. Downloaded applications are displayed in order

starting from the latest one.

Executing Applications

“Java™”

Downloaded applications are sequentially displayed from the latest one.

(M 1)

(M 1-1)

→

“Java™ Gallery”

1. Select the title of the application you wish to

execute. The selected application is executed. When using

network connection type applications, connection to the network can be selected.

2. To end the application, press F and select “End”.

Setting a Screensaver Application

“Java™”

→

“Java™ Gallery”

1. Highlight the desired screensaver application.

2. Press .

The confirmation screen to set a screensaver is displayed.

3. Press [Yes].

Downloading Applications

“Java™”

→

“Java™ Gallery” → “Download More”

1. Select the application you wish to download.

The confirmation screen is displayed after various WAP browser screens.

2. Press to start downloading.

3. Press when finished.

Java™ 87

Setting Network Access

In order to allow Java™ applications to access to the network, you need to set the network access.

→

“Java™” “Permission”

“Java™ Gallery” → [Options] →

→

“Network Access”

1. Select “Session”, “Ask Once”, “Blanket” or “No”.

Viewing Application Information

You can check the information of Java™ applications.

→

“Java™”

“Java™ Gallery”

1. Highlight the desired Java™ application.

2. Press [Options] and select “Information”.

Deleting an Application

You can delete an application from the handset memory.

→

“Java™”

“Java™ Gallery”

1. Highlight the desired Java™ application.

2. Press [Options] and select “Delete”.

88 Java™

Set Java™ Wallpaper

You can set Java™ Wallpaper for the standby screen.

Switching the Java™ Wallpaper On or Off

“Java™” Off

1. Select “On” or “Off

Note

• If you select “On” and a Java™ Wallpaper is not set,

Set Applications

“Java™” Applications”

The downloaded applications are displayed.

→

a list displaying available Java™ Wallpaper is displayed, asking you to make a selection.

“Set Java™ Wallpaper” → “Switch On/

”

→

“Set Java™ Wallpaper” → “Set

(M 1-2)

”.

1. Select the desired Java™ Wallpaper.

Java™ Settings

Application Volume

You can set the volume of the application such as the sound effect to one of the five levels or silent. When “Application Volume” is set to “Silent”, this setup has priority.

→

“Java™” Volume”

The current volume level is displayed.

“Java™ Settings” → “Application

(M 1-3)

1. Press a (or d) to increase the volume or press b

(or c) to decrease the volume and then press .

Backlight

→

“Java™” “Switch On/Off

1. Select “Always On”, “Always Off

Settings”. “Always On”: Lights while the application is

“Always Off

“Java™ Settings” → “Backlight” →

”

operated. Blinks when the blink setting is on.

”: Turns off while the

application is operated even if a key is pressed.

” or “Normal

“Normal Settings”: Works with the main

To Set the Blinking Operation

This setting enables the backlight to be controlled by the application. If set to “Off turned on from the application.

→

“Java™” “Blink”

“Java™ Settings” → “Backlight” →

1. Select “On” or “Off

Vibration

When the vibrator is set in the application, you can choose whether the operation is enabled or not.

→

“Java™”

“Java™ Settings” → “Vibration”

1. Select “On” or “Off

backlight setting (p. 110). Blinks when the blink setting is on.

”, the backlight cannot be

”.

Java™ 89

Calls & Alarms

You can set the priority of incoming calls and alarms while an application is operating.

→

“Java™”

“Java™ Settings” → “Calls & Alarms”

1. Select “Voice Call”, “Video Calling”, “Incoming

Message” or “Alarm”.

2. Select the desired method.

• “Call Priority”, “Message Priority” or “Alarm Priority”: The application is suspended automatically, and you can receive a call or a message, or the alarm will sound. After finishing the call or the message, or the alarm ends, the suspend indicator ( ) is displayed letting you know there is a suspended application.

• “Call Notice”, “Message Notice” or “Alarm Notice”: The marquee (character scrolls) is displayed on the first line of the screen while the application continues. If you press D, the application is suspended, and you can receive a call or a message. After finishing the call or the message, the suspend indicator ( ) is displayed letting you know there is a suspended application.

90 Java™

Java™ Information

The information about the licences belonging to Java™ is displayed.

(M 1-4)

Organiser

Calendar

Calendar allows you to easily schedule appointments or events at any given date or time.

These entries can also be sent via infrared or Bluetooth wireless technology to a PC to share the same schedules. When you exchange entries with other devices, the date and time displayed may be different to that of the original data depending on the data format of the receiving device.

Creating a New Entry

“Organiser”

(M 3)

(M 3-1)

→

“Calendar”

1. Select the desired day to which you wish to add an

event.

2. Press [Options] and select “Add New Entry”.

3. Enter the subject.

4. Enter the location.

5. Select the desired category.

6. Enter the start date and then enter the start time.

7. Select the duration.

When selecting “Other”, enter the desired reminder date and time.

8. Select the reminder time.

When selecting “Other”, enter the desired reminder date and time.

9. Press [Save].

Note

• If the date and time settings have not been entered,

the date and time entry screen is displayed (p. 112).

• The reminder will not sound when “Ringer Volume”

(p. 105) is set to “Silent”.

To Change the Type of the Reminder Tone or Video

1. On the New Entry screen, select “Reminder”.

2. Select “Assign Tone/Video”.

3. Select “Assign Tone” and then select “Preset

Sounds” or “Sound Gallery”, or select “Assign Video”.

4. Select the desired sound or video clip file.

For details on selecting a tone, see “Assigning a Ringtone” on page 106.

Organiser 91

To Change the Duration of the Reminder Tone or Video

1. On the New Entry screen, select “Reminder”.

2. Select “Duration”.

3. Select the time period.

When you select “Other”, you can enter the desired time in two digits using the keypad.

To Change the Repeat Option of the Reminder

1. On the New Entry screen, select “Repeat”.

2. Select the desired repeat option.

To Enter the Description

1. On the New Entry screen, select “Description”.

2. Enter a memo for the schedule entry.

To Make the Entry Secret

1. On the New Entry screen, select “Secret”.

2. Select “On” to make the data secret or select “Off

to leave it as it is.

Viewing a Schedule Entry

“Organiser”

→

“Calendar”

1. Select the day you wish to view.

92 Organiser

To Search By Date

1. In any view, press [Options] and select “Go to”.

2. Select “Today” to display today or “Enter Date” to

enter the desired date.

Tip

• In the monthly or weekly view, you can control the

view by using the following: Monthly view

P: Displays the previous month. R: Displays the next month. Q: Displays the weekly view. K: Moves the cursor to today. c/d: Moves the c ursor to left (the previous day)

a/b: Moves the cursor upward (last week) or

Weekly view

P: Displays the previous week. R: Displays the next week.

”

Q: Displays the monthly view. K: Moves the cursor to today. c/d: Moves the c ursor to left (the previous day)

a/b: Moves the weekly view up or down (the

or to right (the next day).

downward (next week).

or to right (the next day).

previous hour or next hour).

Editing a Schedule Entry

“Organiser”

→

“Calendar”

1. Select the day you wish to edit.

2. Press [Options] and select “Edit”.

3. Select the desired item and modify the entry.

4. Press [Save].

Deleting Schedule Entries

1. In any view, press [Options] and select “Delete”.

2. Select the desired option.

“This Appointment” (daily view):

“All This Day”: Deletes all entries for the

“All This Week” (weekly view):

“Up to Last Week” (weekly view):

“All This Month” (monthly view):

Deletes the selected entry.

selected day.

Deletes all entries for the selected week.

Deletes all entries before this week.

Deletes all entries for the selected month.

“Up to Last Month” (monthly view):

“All Appointments” (weekly and monthly view):

Sending a Schedule Entry

“Organiser”

Deletes all entries before this month.

Deletes all entries in this application.

→

“Calendar”

1. Select the day including schedule entries you wish

to send.

2. Press [Options] and select “Send”.

3. Select “As Message”, “Via Bluetooth” or “Via

Infrared”.

For “Via Bluetooth”

For details, see “Bluetooth” on page 124.

For “Via Infrared”

For details, see “Infrared” on page 127.

Note

• When pairing, you need to enter your passcode when

establishing contact with a Bluetooth wireless technology enabled device for the first time.

Organiser 93

Receiving a Schedule Entry

When the phone receives a schedule entry, a confirmation message is displayed in standby.

1. Press [Yes].

The received entry is saved in the Calendar. Press [No] to reject.

Tip

• For details on entering Infrared or Bluetooth wireless settings, see “Connectivity” on page 124.

Viewing the Memory Status

1. In any view, press [Options] and select “Memory

Status”.

Alarms

Setting the Alarms

The alarm function allows you to be alerted at a specified time.

Note that you need to set the current date and time before setting the alarm function if it has not been done already.

94 Organiser

(M 3-2)

Note

• The alarm will not sound when “Alarm Volume” is

set to “Silent”. When the profile is set to “Silent”, the “General Volume” setting (p. 105) has priority.

→

“Organiser”

“Alarms”

1. Select the blank setting.

2. Enter the desired time.

3. Press [Save].

To Change the Type of Repeat Options

1. On the Set Alarm screen, select “Repeat”.

2. Select “Once Only”, “Every Day” or “Selected

Days”. “Once Only”: The alarm sounds once only.

“Every Day”: The alarm sounds every day at

“Selected Days”: The alarm sounds on the

the specified time.

selected day of the week at the specified time.

To Change the Type of Alarm Tone or Video Clip File

1. On the Set Alarm screen, select “Assign Tone/

Video”.

2. Select “Assign Tone” and then select “Preset

Sounds” or “Sound Gallery”, or select “Assign Video”.

3. Select the desired tone or video clip file.

For details on selecting a tone, see “Assigning a Ringtone” on page 106.

To Change the Snooze of the Alarm Tone

1. On the Set Alarm screen, select “Snooze”.

2. Select the desired snooze option.

To Change the Alarm Volume

1. On the Set Alarm screen, select “Alarm Volume”.

2. Press a (or d) to increase the volume or press b

(or c) to decrease the volume.

To Change the Vibration of Alarm Tone

1. On the Set Alarm screen, select “Vibration”.

2. Select “On”, “Link to Sound” or “Off

For details on selecting a vibration, see “Vibration” on page 107.

”.

To Change the Duration of the Alarm Tone

1. On the Set Alarm screen, select “Duration”.

2. Select the desired duration.

Resetting an Alarm Setting

“Organiser”

→

“Alarms”

1. Highlight the alarm you wish to reset.

2. Press [Options] and select “Reset Alarm”.

Resetting All Alarm Settings

“Organiser”

→

“Alarms” → “Clear All”

1. Press [Yes] or [No].

Organiser 95

Calculator

The calculator function performs the 4 arithmetic calculations using up to 12 digits.

“Organiser”

The calculator is displayed on the display. Key operations for calculation are as follows:

To enter a decimal point, press P. To clear the entered number or function, press U. To do the calculations, press . To start a new calculation, press U.

96 Organiser

(M 3-3)

→

“Calculator”

Rate Conversion

You can also use the calculator as a currency calculator to convert from/to a home currency using a conversion rate that you enter.

To Set a Currency Conversion Rate

→

“Organiser” “Currency Converter”

“Calculator” → [Options] →

→

“Exchange Rate”

1. Select “Domestic” or “Foreign”.

2. Enter the currency conversion rate.

To delete a digit, press U.

To Convert a Value

“Organiser”

→

“Calculator”

1. Enter the value to be converted.

2. Press [Options] and select “Currency Converter”.

3. Select “Convert to Domestic” or “Convert to

Foreign”.

Voice Recorder

This allows you to record a voice clip, which can be used to remind you of schedule entries or be sent within a multimedia message. The recorded voice clip is saved in Sound Gallery. Voice clips are saved in .amr format.

Recording a Voice Clip

“Organiser”

(M 3-4)

→

“Voice Recorder”

1. Press to start recording.

To stop recording before the recording time is over, press .

2. Select “Save” to save the voice clip.

Note

• Press a (or V) or b (or W) to adjust the sound

volume when playing back the recorded file.

Sending Voice Clips

→

“Organiser”

“Voice Recorder”

1. Press to start recording.

2. Press to stop recording.

3. Select “Save and Send”.

For details on creating a message, see “Creating a New Message” on page 62.

Selecting the Record Time

→

“Organiser” “Record Time”

“Voice Recorder” → [Options] →

1. Select “For Message” or “Extended Voice”.

When selecting “Extended Voice”, you can save the voice clip only in a memory card automatically.

Selecting the Storage Memory

“Organiser” “Save Recording to”

→

“Voice Recorder” → [Options] →

1. Select the desired location.

When selecting “Choice”, you can select the location when saving a voice clip.

Scanner

With the built-in digital camera, you can read texts and barcodes in Jan format and QR codes, and create QR codes. The scanned data can be saved as a URL, Email address and text.

Note

• When scanning does not take place, it may be due to

one of the following reasons: type or size of barcode, scratches, dirt, damage, print quality, light reflection, etc.

(M 3-5)

Organiser 97

Reading Barcodes

“Organiser”

→

“Scanner” → “Scan Barcode”

1. Display the barcode using the external camera.

2. Press .

3. Press [Options] and select the desired option.

The options vary depending on the scanned data. “Open Link”: The browser opens the URL. “Copy URL”: The URL is copied. “Save”: The URL is saved. “Send Message”: “Copy”: The result is copied.

To Use the Continuous Scanning

The result is sent as SMS or MMS.

1. In scanning mode, press [Options] and select

“Continuous Scan”.

2. Select “On” or “Off

Opening a Barcode Picture

“Organiser”

→

”.

“Scanner” → “Open Barcode”

1. Select the desired picture data for barcode.

Press to save.

98 Organiser

Viewing the Scanned Data

“Organiser”

→

“Scanner” → “Scanned Results”

1. Highlight the data you wish to view, then press .

2. Enter the desired text or select the desired data, then

press .

3. Press to save.

Creating QR Codes

→

“Organiser”

“Scanner” → “Create QR Code”

1. Select the desired option.

“Text Input”: Create a QR code using the text

“Gallery”: Create a QR code using the

you enter.

Gallery data.

2. Enter the desired text or select the desired data, then

press .

3. Press to save.

Tip

• The QR code is saved in a PNG format file.

Scanning Text

“Organiser”

→

“Scanner” → “Scan Text”

1. Display text using the camera.

2. When the bar under the scanned text is blue, press

3. Press a or b to select the desired text, then press

4. Press [Options] and select the desired option.

“OK”: The scanned result is in the text

“Select/Edit”: The scanned result can be

“Change Mode”: The scanned result can be

To Use Reversed Text

entry screen.

modified.

converted to a web address, mail address, phone number or to roman text.

1. In scanning mode, press [Options] and select

“Reversed Text”.

2. Select the desired option from “Auto”, “Normal” or

“Reversed”.

Stopwatch

You can store 4 lap times when using the stopwatch function.

“Organiser”

(M 3-6)

→

“Stopwatch”

1. Press to start.

Press [LAP] to view the lap time before the stopwatch stops. Last 4 lap times are saved.

2. Press to stop.

Tip

• You can save a record of lap time and stop time in

Text Templates by pressing [Options] and selecting “Save to Templates”.

Resetting Time

1. After stopping the stopwatch, press [Options] and

select “Reset”.

Organiser 99

Sharp WX-T91 User Guide

Specifications and Main Features

Frequently Asked Questions

User Manual

Introduction

Contents

Your Phone

Optional Accessories

Getting Started

Inserting the SIM/USIM Card and the Battery

Removing the SIM/USIM Card and the Battery

Charging the Battery

Inserting the Memory Card

Removing the Memory Card

Connecting the Stereo Headset

Turning Your Phone On and Off

Keypad Lock

Display Indicators (Main Display)

Opening Your Phone

Navigating Functions

Voice Call/Video Calling Functions

Making a Voice Call

Speed Dialling

Redialling

Answering a Voice Call

Incall Menu (Voice Call)

Making a Video Calling

Answering a Video Calling

Incall Menu (Video Calling)

Using the Menu

Top Menu

List of Menu Functions

Entering Characters

Changing the Input Language

Changing the Input Method

Chinese User Dictionary

Using Templates

Copying, Cutting and Pasting Text

Insert Phonebook Entries

Call Manager

Changing the List Displayed

Selecting the Storage Memory

Sorting the Phonebook List Order

Selecting the Search Mode

Add New

Viewing My Card

Copying Phonebook Entries between SIM/USIM Card and Handset

Dialling from the Phonebook

Editing Phonebook Entries

Assigning a Ringtone or a Ring Video Clip File to Each Entry

Deleting Phonebook Entries

Manage Group

Message Groups

Memory Status

Speed Dial List

Sending a Phonebook Entry

Receiving a Phonebook Entry

Sending a Voice Clip Message or Video Clip Message Using an Address from the Phonebook

Camera

Taking Pictures

Recording Video Clips

Using the Options Menu in the Viewer Position of the Display

Common Functions in the Photo and Video Camera Modes

Functions in the Photo Camera Mode

Functions in the Video Camera Mode

Messages

Email

Creating a New Message

Cell Broadcasts

Area Info

Messaging Settings

FET Mobile Internet

Navigating a WAP Page

Browser Settings

Media Player

TV & Video

Music Player

Gallery

Picture Gallery

Video Gallery