Senton 35808 User Manual

SENTON Enterprises Limited 信 通 企 業 有 限 公 司

Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室

Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五

IMPORTANT SERVICE INFORMATION

Read this manual before attempting to setup or use this instrument. It contains important information regarding safe
installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase

to
simplify and accelerate any needed action. If you need assistance or service, call [phone] between 8:00 a.m.
and 4:30 p.m. Pacific Standard Time, Monday through Friday. You can also visit our web site at

http://www.nwbphones.com

for technical support and information on our other products.

WARNING

To prevent fire or shock hazard, do not expose this product to rain or any type of excess moisture. If accidentally
dropped into water, the AC adapter should immediately be unplugged from the wall along with the telephone line cord.

THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE PRESENCE OF IMPORTANT OPERATING AND

MAINTENANCE (SERVICING) INSTRUCTIONS IN THE OWNER'S MANUAL.

• Excursion

• Rechargeable Ni-Cd Battery Pack

• Telephone Line Cord(Short and Long)

• AC Adaptor

• User’s Manual

• Warranty Card

• Accessory Order Form

Excursion®35808

CARTON CONTENTS

®

35808 Base and Handset

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY

INSTRUCTIONS

031804A-1 1

SENTON Enterprises Limited 信 通 企 業 有 限 公 司

Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室

Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to
persons, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement or near a

swimming pool.

5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.

6. Slots and openings in the cabinet and the back or bottom are provided for ventilation, to protect it from overheating. These openings should

never be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This
product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper
ventilation is provided.

7. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power

supply to your home, consult your dealer or local power company.

8. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it.

9. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.

10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could

result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

11. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service contractor when some service or repair

work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric
shock when the appliance is subsequently used.

12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the

operating instructions. Improper adjustments of other controls may result in damage and will often require extensive work by a qualified

technician to restore the product to normal operation.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinctive change in performance.

13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

14. Do not use the telephone to report a gas leak in the vicinity of the leak.

INSTALLATION

PRECAUTIONS

1. Never install telephone wiring during a lightning storm.

2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

3. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

4. Use caution when installing or modifying telephone lines.

031804A-1 2

SENTON Enterprises Limited 信 通 企 業 有 限 公 司

Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室

Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五

MAINTENANCE

1. Use a damp cloth to clean the plastic cabinet. A mild soap will help to remove grease or oil. Never use polish, solvents, abrasives or strong
detergents since these can damage the finish.

2. Your phone should be situated away from heat sources such as radiators, heaters, stoves or any other appliance that produces heat.

CAUTION

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instruction. read and follow these
instructions:

1. Use only the 3.6V, 450mAh, Ni-Cd battery pack ..

2. Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal instructions.

3. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

4. Exercise care in handling the battery in order not to short the battery with conducting material such as rings, bracelets and keys. The battery or
conductor may overheat and cause burns.

5. Recharge only the battery provided with or identified for use with this product. The battery may leak corrosive electrolyte or explode if it is not
the correct type.

6. Do not attempt to rejuvenate the battery provided with or identified for use with this product by heating them. Sudden release of the battery
electrolyte may occur causing burns or irritation to eyes or skin.

7. When inserting the battery into this product, the proper polarity or direction must be observed. Reverse insertion of batteries can cause
charging that may result in leakage or explosion.

8. Do not store this product, or the battery provided with or identified for use with this product, in high-temperature areas. Batteries that are
stored in a freezer or refrigerator for the purpose of extending shelf life should be stabilized at room temperature prior to use after cold storage.

9. Disconnect telephone lines before installing batteries

SAVE THESE INSTRUCTIONS

FCC NOTICE

The FCC requires that you be advised of certain requirements involving the use of this telephone.

1. This telephone is hearing aid compatible.

2. This equipment complies with 47 CFR Part 68 requirement. On the bottom of this equipment is a label that contains, among other information,
the ACTA registration number and Ringer Equivalence Number (REN) for this equipment. If requested, provide this information to your
telephone company.

3. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when
your number is called. In most, but not all areas, the sum of the RENs of all devices should not exceed five (5.0). To be certain of the number
of devices you may connect to your line, as determined by the REN, you should call your local telephone company to determine the maximum
REN for your calling area.

4. If your telephone causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they

031804A-1 3

SENTON Enterprises Limited 信 通 企 業 有 限 公 司

r

Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室

Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五

will notify you in advance. But if advance notice is not practical, you will be notified as soon as possible. You will be advised of your right to
file a complaint with the FCC.

5. Your telephone company may make changes to its facilities, equipment,

operations or procedures that could affect the proper operation of your equipment. If they do, you will be given advance notice so as to give
you an opportunity to maintain uninterrupted service.

6. If you experience trouble with the telephone, please contact VTC Service & Manufacturing Co., Inc at [phone] or write to: VTC
Customer Service, 16988 Gale Ave., City of Industry, CA 91745 for repair/warranty information. The telephone company may ask you to
disconnect this equipment from the network until the problem has been corrected or you are sure that the equipment is not malfunctioning.

7. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs.
(Contact your state public utility commission or corporation commission for information.).

8. USOC jack type is RJ11C and the compatible jack is part 68 compliance.

NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this [equipment ID] does not
disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified
installer.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and, (2) his device must accept
any interference received, including interference that may cause desired operation. Privacy of
communications may not be ensured when using this phone.

Changes or modifications not expressly approved in writing by Northwestern Bell Phones may
void the user's authority to operate this equipment.

Some cordless phones operate at frequencies that may cause interference to nearby TVs and VCRs;
to minimize or prevent such interference, the base of the cordless phone should not be placed nea
or on top of a TV or VCR; and, if interference is experienced, moving the cordless telephone
farther away from the TV or VCR will often reduce or eliminate the interference.

AC ADAPTOR:

Use only with Class 2 Transformer, 12 VDC output ,

500mA, center pin positive.

031804A-1 4

SENTON Enterprises Limited 信 通 企 業 有 限 公 司

N

Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室

Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五

®

Excursion

031804A-1 5

MSG WTG/

EW CALL

LED Indicator

TALK Button

EDIT/FLASH
Button

RE/PA/DEL
Button

REMOTE/SCAN
Button)

Handset Jack

TONE(*)/
Button

OPT/MENU
Button

SAVE/PHONE BOOK

Button

Base Unit
(RearView)

35808 CONTROLS DIAGRAM

LCD Display

UP

DN

# /

CALLS Button

Button

Button

Button

SENTON Enterprises Limited 信 通 企 業 有 限 公 司

N

Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室

Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五

VOL UP Button

Time Set Button

Power LED Indicator

EW MSG LED

Indicator

PAGE Button

Repeat

Erase Button

Play/Stop Button

Button

POWER

LINE

DC 12V

TS/5R /3R

500mA

TONE PULSE

TS/5R/3R Switch TONE/PULSE Switch DC 12V Jack LINE Jack

VOL DOWN

Button

MEMO Button

IN USE LED Indicator

CHARGE LED
Indicator

ANS ON/OFF Button

SKIP

Button

OGM Button

CODE Button

031804A-1 6

SENTON Enterprises Limited 信 通 企 業 有 限 公 司

Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室

Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五

DESCRIPTIONS

Handset Controls-Cordless Telephone

LCD Display - Shows call information, phone status, prompts and Phonebook items.

MSG WTG /NEW CALL Ind icator - Red LED blinks when you have call(s) and new message(s).

TALK Button - Press this button to place a call, answer a call, or end a call.

SAVE/PHONE BOOK Button – Allows you to retrieve a memory(name and phone number)for the personal Phonebook (up to 20 memories).

Saves the changes on the listed items.

TONE * /

# /

EDIT/FLASH Button - (EDIT) Press to edit listed items. (FLASH)Momentarily hangs up the phone to access custom calling features such as Call

waiting or Three-way calling provided by you local phone company.

UP

Microphone -Used for speaking with callers.

Headset Jack – A jack located on the side of the handset used for connecting your headset to enjoy a hands-free communication.

RE/PA/DEL(Redial/Pause/Delete) Button – (Redial)Press to redial the last number you dialed.(Pause)Press to insert pause while dialing.

(Delete)Press and hold down to delete items.

Calls Button - Press to see the caller list.

REMOTE/SCAN Button – Allows you to access most of the Excursion

to listen to the caller leave their incoming Message(ICM) in order to let you decide if you want to answer the call While in Talk mode. It is used to
manually select one of the 40 operating channels when you experience interference on the handset.

OPT/MENU–During you view the caller list, press to place a long distance call or to place a local call. While in standby mode, this button allows
you to set the handset in Programming mode.

Receiver – Allows you to hear calls.

031804A-1 7

Button - Press to move left on the large LCD Display.

Button - Press to move right on the large LCD Display.

/DN Button - Allows you to adjust the handset volume(3 steps) in TALK mode. It also allows you to view the caller list or /and Phone.

®

35808’s functions away from the base unit using the handset. Also press

SENTON Enterprises Limited 信 通 企 業 有 限 公 司

Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室

Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五

Handset Controls-Answering System

Play Button

Repeat Button

Help Button

Stop Button

OGM REC Button - Press to record Outgoing Message (OGM).

PLAY Button - Press to playback incoming Message(s) (ICM) or MEMO Message(s).

REPEAT Button - Press to skip to the previous message during playback.

SKIP Button - Press to skip to the next message during playback.

STOP Button - Press to stop current activity.

ERASE Button - Press to erase message

REMOTE Button – Allows you to access most of the Excursion

to the caller leave their incoming Message (ICM) in order to let you decide if you want to answer the call.

OGM Button - Press to playback Outgoing Message(OGM).

HELP Button - Press to access voice help menu

.BASE UNIT CONTROLS:

Base Antenna - A fixed antenna.
Base Unit Charge Terminals - Used for charging handset batteries. We recommend that you clean these contacts periodically with an

alcohol-moistened cloth or cotton swab.

Erase Button

OGM Button

SKIP Button

®

35808’s functions away from the base unit using the handset. Also press to listen

031804A-1 8

SENTON Enterprises Limited 信 通 企 業 有 限 公 司

Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室

Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五

IN USE Indicator -Lights up steadily when the phone is in talk mode and turns off when the handset is not in use.

CHARGE LED Indicator – Lights up steadily when paging the handset. Lights up steadily when the handset is being charged on the base and turns
off when the handset is removed from its cradle.

NEW MSG LED Indicator – Flashes rapidly if the system has new call message(s) and have message(s) in your voice mailbox. Lights up to

indicate the presence of Memo message and blinks if there are new Memo messages(s). Lights up to indicate the presence of incoming
Message(ICM) and blinks if there are new incoming Message(s) (ICM).

PAGE Button - Allows you to locate the handset when it is not on the base, or to alert the person near the handset.

Volume Control UP

PLAY/STOP Button – Press to play back the incoming Message(s)(ICM) and Memo message(s) or to stop current activity.

ANS. ON/OFF – Press to activate or deactivate answer function.

REPEAT

SKIP

ERASE Button – Press to erase a single message or all messages in order to conserve message space in memory.

Memo Button – Press to record Memo message.

OGM Button – Press to record Outgoing Message(OGM).

TIME SET Button – Press to set the day and time stamp.

CODE Button – Press to set the password for remote operation.

Ring (TS/5R/3R) Switch -Allows you to select the appropriate dialing service. TONE for tone dialing or PULSE for rotary service..

TONE/PULSE Switch - A switch located on the rear of the base unit, which allows you to set the dialing mode to either Tone dialing or

Pulse(rotary) dialing.

DC 12V jack - A jack located on the rear side of the base unit used for connecting the AC adaptor to the base unit.
TEL LINE jack – Accepts line cord to make connection with modular type telephone outlet.

Button – Press to skip to the previous message during playback.

Button – Press to skip to the next message during playback.

/DN Button -Adjusts the base unit speaker volume level..

031804A-1 9

SENTON Enterprises Limited 信 通 企 業 有 限 公 司

Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室

Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五

INSTALLATION

CAUTION: USE ONLY THE NICKEL CADMIUM(Ni-Cd) BATTERY TYPE INCLUDED WITH THIS UNIT. USE OF OTHER

BATTERY TYPES MAY CAUSE INJURIES OR DAMAGE.

1. Remove the battery compartment cover of the handset by pressing the top of the cover and sliding it down.

2. Connect the Ni-Cd battery pack plug along the slot into the handset’s battery connector as shown below.

3. Insert the Ni-Cd battery into the battery compartment.

4. Replace the battery compartment cover by sliding it up towards the handset.

NOTE: Use the type and size of Ni-Cd battery pack, 3.6V, 450mAh. It is recommended that the Ni-Cd battery pack should be fully charged
overnight prior to initial use.

Belt Clip Installation
With the back of handset facing up, insert one side of the belt clip hook into the matching slots at the top side of handset as shown in Figure2. Slide
the other hook until it locks into place from the opposite side of the handset.

Handset
Battery
Compartment

Red
wire

(Figure 1)

Belt clip hook

(Figure 2)

POWER CONNECTION

CAUTION: You must use a Class II, 120 Volt AC/12 Volt DC adaptor that delivers at least 500mA. The center tip must be positive and the

Black
Wire

Battery
Connector

031804A-1 10

SENTON Enterprises Limited 信 通 企 業 有 限 公 司

t

r

k

Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室

Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五

plug must correctly fit the unit’s DC 12V jack.

1. Plug the AC adaptor into a standard AC outlet.

2. Insert the small plug inot the DC 12V jack on the rear of the base unit as shown in Figure 3.

HEADSET CONNECTION
One of the special features of your phone is that your handset could utilize a headset(not included) for hands-free communication. Insert the small
plug at the end of your headset cord to the headset jack at the side of the handset as shown in Figure 4. Follow the procedures discussed in “Placing
a Call” when to place and receive a call.
Note: The headset jack of your cordless telephone is compatible with 2.5mm headset plugs only. When you plug in the headset into the headset jack,
it automatically mutes the microphone and speaker of the handset. Unplug the headset to return the handset to normal use.

INITIAL SETUP

Please follow these steps before using the cordless telephone for the first time.

1. Ensure that the handset battery pack is installed and charged fully for at least 14 hours.

2. Ensure that all connections(line cord and adaptor cord) are properly inserted into rear of the base unit.

SETTING THE TONE/PULSE MODE

Select the appropriate dialing service by moving the TONE/PULSE switch at the rear of the base unit:

· TONE for Tone service , or

Tone/Pulse

Switch

TS/5R/3R

Switch

DC 12V Jack

TS/5R/3R

AC Adaptor
Plug

DC 12V
500mA

TONE PULSE

(Figure 4)

LINE

(Figure 3)

Telephone Line Jack

AC Outle

AC Adapto

Handset Jac

031804A-1 11