Sekonic L-308 User Manual

Quick Guide to the Sekonic L-308

LUMISPHERE

ON/OFF

BATTERY CHECK

1/10 STOP
INCREMENTS

MEASURE

MODE

FLASH
FLASH W/CORD
DAYLIGHT
DAYLIGHT

ISO

· DEPRESS WHILE PUSHING UP OR
DOWN SWITCH

· IN DAYLIGHT MODE
BETWEEN F-STOP AND EV, TAKE READING,
HOLD DOWN ISO, TOGGLE BETWEEN BY
USING MODE BUTTON

, TO TOGGLE

FLASH CORD SOCKET
WHEN CORD IS ATTACHED PUSH
MEASURE BUTTON TO TRIGGER
FLASH AND MEASURE LIGHT

UP

DOWN

Basic Operation - Sekonic L-308

On/Off/Battery Check

Press Power button. To check battery power hold down
button. Power is indicated in 1/10th steps

Set ISO

Hold down ISO button while depressing Up or Down button

Use as Reflected Meter

Slide Lumisphere away to expose meter cell

Use as Incident Meter

Slide Lumisphere over meter cell

Measure Brightness /Contrast Difference

Clip in flat Lumidisc over meter cell

Daylight Reading

Select Daylight Mode, depress Measure button

Cordless Flash Reading

Select Flash Mode, depress Measure button, manually
trigger flash

Flash Reading Using Flash Cord

Select Flash with Cord Mode, insert flash cord, depress
Measure button

EV Reading

Select Daylight EV Mode. In Daylight Mode, toggle
between F/Stop and EV readout by holding down ISO button
and depressing Mode button

PRINTED IN USA