Seco-Larm SK-910RB2Q, SK-917T2A-UQ, SK-919TD2A-U, SK-919TD2A-UP Specsheet
PiSK-910RB2Q.docx
1-949-261-2999
1-800-662-0800
1-949-261-7326
Web: www.seco-larm.com
Email: info@seco-larm.com
Copyright © 2011
SECO-LARM U.S.A, Inc.
All rights reserved
16842 Millikan Avenue
Irvine, CA 92606
Tel:
Fax:
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
2-Channel RF Transmitters & Receiver
SK-919TD2A-UP Factory Pre-coded Transmitter
Operates up to 500ft (152m), 315MHz
LED transmission indicator
Includes 12VDC alkaline battery
Two buttons, three channels
SK-919TD2A-UP: 68 billion possible codes
SK-917T2A-U: 18 quintillion possible codes
11/4”x21/4”x11/2”
(32x63x38 mm)
SK-910RB2Q Specifications:
Operating frequency
315MHz
Memory capacity
15 transmitter button codes per channel,
30 per receiver
Operating voltage
11~24 VAC/VDC
Operating current
Standby
8mA@12VDC
Active
30mA@12VDC per channel
Relay output modes
4-sec. momentary, toggle, latch,
validity, 1-sec. momentary
Relay contact rating
Form C 10A@24VDC or 120VAC per channel
Connectors
Screw terminals: Power (+,-)
2 relays (NO/NC/COM)
Dimensions
37/16”x37/16”x11/8” (87x87x28 mm)
SK-919TP2H-NU Two-Button Handheld Transmitter
Operates up to 500ft (152m), 315MHz
Over 68 billion (6.8x10
10
) possible codes
Includes two 3VDC lithium batteries
Visor clip and belt clip included. Belt-clip holster &
wall-mount bracket also available (Model: SK-9HBC)
Two buttons, three channels
213/16”x 31/2”x1/2”
(71x89x13 mm)
37/16”x37/16”x11/8”
(87x87x28 mm)
Independently
programmable channels
with 5 output modes
Five programmable relay output modes:
SK-910RB2Q Two-Channel Receiver
-- 4-Second Momentary Output
-- Validity Output
-- Toggle Output
-- 1-Second Momentary Output
-- Latch Output
Flexible operating voltage: 11~24 VAC/VDC
Up to 500ft (152m) range
Independently programmable channels
Controls garage doors, gates, house lights, alarm panels, or other
devices via remote
Compatible with all 315MHz SECO-LARM transmitters (fixed code
Two LEDs indicate RF reception, learn mode entered, transmitter
learned, memory cleared, and relay output mode
Two-button programming, no need to cut jumpers
Increase range with SECO-LARM’s
Extended Range Antenna (SK-91ERSD)
SK-917T2A-U CODEBUMP Transmitter
and CODEBUMP)
Loading...