Seco-Larm SK-910RAQ, SK-910RAVQ Specsheet
PiSK-910RBQ.docx
1-949-261-2999
1-800-662-0800
1-949-261-7326
Web: www.seco-larm.com
Email: info@seco-larm.com
Copyright © 2011
SECO-LARM U.S.A, Inc.
All rights reserved
16842 Millikan Avenue
Irvine, CA 92606
Tel:
Fax:
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Miniature 1-Channel RF Receivers
& Transmitters
SK-919TD1S-UP Factory Pre-coded Transmitter
SK-919TT1S-BU DIP-Switch-coded Transmitter
Operates up to 500ft (152m), 315MHz*.
LED transmission indicator.
Includes 12VDC alkaline battery.
Compatible with all 315MHz SECO-LARM receivers.
SK-919TD1S-UP: Over 68 billion possible codes.
SK-919TT1S-BU: Use for “block coding” a large
number of transmitters with the same code, or for
simple matching of a transmitter already in use.
11/2”x 21/4”x5/8”
(38x63x16 mm)
SK-910RA and SK-910RAV
Specifications:
SK-910RAV
Range
Up to 500’ (150m) in open air
Operating voltage
11~24 VAC/VDC
3~13.8 VDC
Current draw
5mA Standby, 50mA
LED flashing @12 VDC
5mA Standby, 15mA
LED flashing @12 VDC
Output mode
Programmable 4s momentary (default),
1s momentary, toggle (ON/OFF), validity
# of outputs 1 1
Output Type
1A Relay (NO/NC/COM)
5A Transistor GND
Transmitter
Compatible with all SECO-LARM transmitters
SK-919TP1H-BU One-Button Handheld Transmitter
Operates up to 500ft (152m), 315MHz*.
Over 68 billion (6.8x10
10
) possible codes.
Includes two 3VDC lithium batteries.
Visor clip and belt clip included. Belt-clip holster &
wall-mount bracket also available (Model: SK-9HBC).
Slimline design.
*Actual range may vary greatly depending on the installation and
operating environment
213/16”x 31/2”x1/2”
(71x89x13 mm)
SK-910RA One-Channel Receiver – 1 Amp Relay Output
Four programmable output modes:
-- 4-Second Momentary Output
-- Validity Output
-- Toggle Output
-- 1-Second Momentary Output
Flexible operating voltage: SK-910RA: 11~24 VAC/VDC
SK-910RAV: 3~13.8 VDC
Up to 500ft (152m) range*.
Controls garage doors, gates, house lights, alarm panels, or other
devices via remote.
Compatible with all 315MHz SECO-LARM transmitters (fixed code
LED indicates RF reception, learn mode entered, transmitter
learned, memory cleared, and relay output mode.
33/16”x 29/16”x3/4”
(80x65x19 mm)
and CODEBUMP).
SK-910RAQ
Loading...