1-949-261-2999
1-800-662-0800
1-949-261-7326
Web: www.seco-larm.com
Email: info@seco-larm.com
Copyright © 2011
SECO-LARM U.S.A, Inc.
All rights reserved
16842 Millikan Avenue
Irvine, CA 92606
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Miniature 2-Channel RF Receiver
&Transmitters
SK-919TD2A-UP Factory Pre-coded Transmitter
Operates up to 500ft (152m), 315MHz*.
LED transmission indicator.
Includes 12VDC alkaline battery.
Two buttons, three channels.
SK-919TD2A-UP: 68 billion possible codes.
SK-917T2A-U: 18 quintillion possible codes.
11/4”x21/4”x11/2”
(32x63x38 mm)
SK-910RAV2 Specifications:
Up to 500’ (150m) in open air
5mA Standby, 15mA
LED flashing @12 VDC
Programmable 4s momentary (default),
1s momentary, toggle (ON/OFF), validity
Compatible with all SECO-LARM transmitters
SK-919TP2H-NU Two-Button Handheld Transmitter
Operates up to 500ft (152m), 315MHz*.
Over 68 billion (6.8x10
10
) possible codes.
Includes two 3VDC lithium batteries.
Visor clip and belt clip included. Belt-clip holster &
wall-mount bracket also available (Model: SK-9HBC).
Two buttons, three channels.
Slimline design.
*Actual range may vary greatly depending on the installation and
operating environment
213/16”x 31/2”x1/2”
(71x89x13 mm)
SK-910RAV2 Two-Channel Receiver – Transistor Ground O/P
Four programmable output modes:
-- 4-Second Momentary Output
-- 1-Second Momentary Output
Flexible operating voltage: 3~13.8 VDC.
Up to 500ft (152m) range*.
Controls garage doors, gates, house lights, alarm panels, or other
devices via remote.
Compatible with all 315MHz SECO-LARM transmitters (fixed code
Two LEDs indicate RF reception, learn mode entered, transmitter
learned, memory cleared, and relay output mode.
33/16”x 29/16”x3/4”
(80x65x19 mm)
and CODEBUMP).
SK-917T2A-U CODEBUMP Transmitter