Seca 416 Service Manual

Service Manual

416 1721009

05.11.2006

Variants:

416 1821009

for seca

Description:
Infantometer analog

416

Content:

Operation 17-10-02-242

Service Manual Number

17-05-01-332-

Valid as of:

Replacement 30-19-17-250
Spare parts 30-19-17-249

Manual number: 17-05-01-332-

Service manual Replacement

seca 416
Dissassembly

1.1 Removing the slide unit (A) and the end caps (B)

For removing the slide unit turn over the babyboard and solve the screws of the end caps (B) and take
of the end caps (B). Turn over the babyboard again and move out the slide unit (A) into the right
direction.

1.2 Removing bearing roll (C) , bearing block (D) and bearing roll with cone (E)

Turn over the slide unit (A) and solve the screws of the bearing block (D), now its possible to replace
bearing block (D) and bearing roll (C). For take out the bearing roll with cone (E) press the both
detents together and move the rolls upwards.

1.3 Removing display (F)

First turn over the slide unit, than solve the screws from the display (F). Removing the display.

1.4 Removing clamping lever (G), spring for clambing lever (H), pushbutton (I), spring for push
button (J) and cap for pushbutton (K)

Turn over the slide unit, then press the clambing lever (G) and the spring for the clambing lever (H)
upwards.
For removing the push button (J) first leverage the spring for the push button (J) then press the detent
(R) sidewards and move push button and cap for push button upwards.

Assembly

2. assemble in the reverse order of disassembly

07.11.06 /Rei 1/2 30-19-17-250