Schwinn AD6 Wind Screen Installation Guide
Schwinn® AD6 Airdyne® Wind Screen Installation Guide
Important Safety Instructions
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
Read and understand all warnings on this machine.
• Carefully read and understand the Assembly and Owner’s Manual.
• Keep bystanders and children away from the product you are assembling at all times.
• Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.
• Before each use, examine this machine for loose parts or signs of wear. Do not use if found in this condition. Monitor the Seat, Pedals, and Crank Arms
closely. Contact Nautilus® Customer Service for repair information.
• Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.
• If replacement parts are necessary use only genuine Nautilus® replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to
users, keep the machine from operating correctly and void the warranty.
• Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s Manual.
• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury.
• This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This
Notice is provided in accordance with California’s Proposition 65. If you would like additional information, please refer to our Web site at
www.nautilus.com/prop65.
Installation Guide
004-4775.071512.A
If you need assistance, please call Schwinn® Customer Service at 1-800-605-3369.
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, outside U.S. +01-360-859-5180
| Printed in China | © 2012 Nautilus, Inc.
Refer to the Assembly Manual for complete safety instructions.
1. Route the Securing Straps through the Airdyne® Wind Screen
1
2. Place the Airdyne® Wind Screen over the Locking Knob and onto the Fan Housing
3. Attach the Securing Straps to the Fan Housing
X4
4. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly
assembled.
Do not use until the machine has been fully assembled and inspected for
correct performance in accordance with the Owner’s Manual.
2
Loading...