Schwinn 212 User Manual 2

212 Schwinn® Recumbent Exercise Bike
Parts List
Full Size Hardware Chart
Product Illustration

Assembly Instructions

FITNESS SAFEGUARDS AND WARNINGS

Before starting any exercise program, consult with your physician or health professional. He or she can help establish the correct exercise frequency, intensity (target heart rate zone) and time appropriate for your particular age and condition.
The following 3 warnings listed below are also located on the computer console mast of the exercise bike. Failure to follow any of these safeguards may result in injury or serious health problems.
Read and understand the Owner’s Manual and operation instructions prior to use. If you do not have an Owner’s Manual, call 1-800-864-1270 to obtain one.
If you feel any unusual pain or tightness in your chest, shortness of breath or dizziness, feel faint or have any discomfort while you exercise, STOP! Consult your physician.
Keep children and pets away.

Other Important Safeguards and Warnings

Do not exceed maximum user weight of 136 kg (300 lb.)
It is the responsibility of the owner to ensure that all users of this
equipment are adequately informed of all precautions.
Use this equipment only on a solid level surface. Cover the floor or carpet beneath this equipment for protection.
Read the Warning Label located on the computer console mast.
Do not place fingers or any other objects into moving parts of the exercise
equipment.
This equipment is designed for use by persons aged 13 years and older. Teenagers should be supervised.
Always wear athletic shoes for foot protection. Avoid wearing loose clothing that may become entangled in the drive mechanism.
Warn bystanders to keep a safe distance, especially from the moving pedals. Do not allow anyone to touch the bike while it is in operation.
This equipment is for home use only. Do not use in a commercial, institutional, or rental setting.
Care should be taken when mounting or dismounting the exercise bicycle.
Do not operate in damp or wet conditions.
Follow proper set-up and guidance as outlined in the Owner’s Manual and
Assembly Instructions. Only use the bike as outlined in usage instructions of the Owner’s Manual.
Prior to each use inspect the bike for loose, broken, or worn parts. Do not use if found in this condition. The safety of the equipment can only be ensured if it is regularly examined and maintained. (See Maintenance section of the Owner’s Manual)
Refer to the Maintenance section in the Owner’s Manual and disconnect power supply before servicing the bike.
Replace Warning Label if damaged, illegible, or removed.
We recommend that a minimum distance of 1 meter (39 inches)
surrounding the bike is kept clear of all obstructions, including children, bystanders, and pets. This is to ensure adequate clearance for easy access to the bike and to avoid any possible contact with the moving pedals

212 Schwinn Recumbent Bike Parts List, Hardware Chart, and Assembly Instructions

Assembly of the 212 Recumbent Bike is divided into 5 easy stages; each comprised of only a few setup steps. Before proceeding with the assembly, please read over the easy to follow instructions to familiarize yourself with the process.
• A flat area of 5’ x 7’ is suggested to assemble and properly use the 212 exercise bike.
• You will need the following tools to complete the assembly: 5mm Allen wrench (supplied) Open wrench 13mm, 14mm, 15mm (supplied) Phillips screwdriver (supplied)
Also, to ensure quick and easy se t up of the 212 Recumbent Bike, please verify the size and quantity of each of the enclosed assembly hardware. Included is a handy full size hardware chart and parts list of each of the required assembly hardware. Simply match up the corresponding hardware to each full size drawing.

Parts List

Check Quantity Description Reference #
__ 1 Computer 1 __ 1 Handlebars 2 __ 4 Computer Screws 3 __ 1 Handlebar Post 4 __ 15 Allen Bolt 8x1.25x16L 5 __ 4 Wavy Washer 6 __ 1 Upper HR Wire 7 __ 1 Upper Computer Wire 8 __ 1 Lower Computer Wire 9 __ 1 Lower HR Wire 10 __ 1 Front Stabilizer 11 __ 4 Flathead Screw 8x16L 12 __ 1 Main Frame 13 __ 1pr Pedals 14 __ 19 Flat Washer 15 __ 1 Seat Rail Post 16 __ 1 Rear Stabilizer 17 __ 1 Seat Rail 18 __ 1 Seat Rail HR Wire 19 __ 1 Seat Handlebar 20 __ 1 Seat Adjustment Knob 21 __ 1 Small Flat Washer 22 __ 1 Seat Bottom 23 __ 8 Allen Bolt 8x1.25x45L 25 __ 1 Seat Support Frame 26 __ 1 Seat Back 27 __ 1pr Bottle Holder 28 __ 8 Screw 5x14L 29 __ 1 AC Adaptor 72

Hardware Chart

Stage#1
Stage#2
Stage#5
Screws M8xP1.25x16mm
Stage#3
Flat Washer
? 8*? 16*2T
Screws M5x14L
Stage#4
Allen Bolt M8xP1.25x 16mm
Flat Washer
? 8*? 16*2T
Screws M8xP1.25x mm
Stage#6
Screws M8xP1.25x16mm
Flat Washer
? 8*? 16*2T
Flat Washer
? 8*? 16*2T
Stage#10
Screws M8xP1.25x16mm
Screws M8xP1.25x mm
Flat Washer
? 8*? 16*2T
Stage#8
Screwdriver
Allen Bolt M8xP1.25x16mm
Allen Key
Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please contact Schwinn at 1.800.864.1270.
Loading...
+ 11 hidden pages