Schneider Electric VT7300 Series Data Sheet

VT7300 Series PIR Ready Low Voltage

Fan Coil Controllers

Smart energy management has never been easier than with the Viconics VT7300
series fan coil controllers. Designed for both new construction and retrot
projects, the controllers dramatically decrease project delivery costs by reducing
installation, conguration and commissioning time. No complex software or
tools are required to customize functionality in order to meet your applications
requirements. They provide all the advanced features and monitoring functions
required by modern building automation systems in a simple, “thermostat like”
enclosure.

The VT7300 fan coil controllers have been specically designed to provide
exceptional temperature control of multi-speed fan coil units with either on-o,
oating or 0 to 10 Vdc valves. Also available are advanced models with built-in RH
sensing and dehumidication strategies.

Open protocol design provides network compatibility to BACnet
Lontalk
versions can be eld retrot with optional communication modules which enable
the controllers to be integrated into virtually all leading building automation
systems as budgets allow or as the building requirements change.

All models can be customized with PIR motion sensor functionality via an optional
PIR accessory cover. The cover can be eld installed or ordered as a factory installed
option. This provide advanced occupancy routines and automatic energy savings
during occupied periods without sacricing occupant comfort.

When compared to traditional building automation controllers, the Viconics
VT7300 series fan coil controllers provide unmatched return on investment to
building owners while maximizing prots for system integrators.

and Wireless Zigbee® network systems. Our Network Ready “standalone”

®

MS/TP, Echelon

®

Product Highlights:

• Open protocol allows for easy integration into any network system

• Network Ready models can be retrot in the eld with optional

communication modules

• One simple wall mounted device to install, wire and commission

• Familiar “thermostat like” look and feel

• Application specic controllers can be congured to meet most

used applications

• No special software required for conguration

• Fully embedded local conguration utility

• Factory installed PIR sensor or PIR ready controller

• Advanced occupancy and monitoring functions

• Simplied user interface

• Hospitality and commercial models available with

market specic HMI

• Extended congurable fan sequences with automatic fan mode

A New Era in Building

Automation Controls

Commercial model shown

Return air

VT7300 Low Voltage Fan Coil Application

Cooling coil 3-speed fan Heating coil Electric heater

Filter
status
switch

Open communication protocols

Typical fan coil application

(VT7300 series)

Fan
status
switch

Optional wireless Zigbee

communication

Market Specific HMI Tailors Product to Application

Commercial Application Hotel and Lodging Application

®

VT7300 Series Fan Coil Unit Controller Matrix

Please refer to the following matrix when ordering controllers:

Viconics Technologies Inc.

028 - 8009-E6