Schneider Electric SQR44101 Instruction Manual

Instruction Bulletin

SQR44101**Z Z-Wave Receptacle

FCC ID: 2AUCU-44101Z

** = color code: WH (white), LA (light almond), BK (black), GY (gray)

Retain for future use.

Features

• Duplex outlets, one outlet is always on, another outlet is Z-Wave controlled.

• Wireless Z-Wave technology creates a mesh network for command and

control interoperability with other Z-Wave compliant controllers and devices.

• Manual and remote ON/OFF control of any lighting or other electrical load connected to Z-Wave controlled outlet.

• Tamper-Resistant.

• Measure the energy usage of the connected loading on the Z-Wave controlled

outlet, display the actual consumption (in W) and the accumulated power used (in kWh) in the user interface of the gateway.

NOTE:

• Please refer to the gateway installation manual for energy usage display and energy measurement features.

SQR44101**Z Z-Wave TR Receptacle, Energy Monitoring, 15A 125VAC Specifications

GDE77981_Eng, 06/2020

Voltage 125 Vac, 60 Hz Regular

outlet

Controlled Outlet

Operating temperature 32–104°F (0–40°C) Supply connection Wireless type Z-Wave (Support S2 and SmartStart) Wireless frequency 908.40 MHz / 908.42 MHz / 916 MHz

Suitable for at least 90°C.

Current 15A Incandescent 600 W

LED 1.25 A (150W) Standard Ballast 1200VA Resistive 1800W (15A) Motor ½ Hp

14 AWG

____________________________________________________________________________________________

SQR44101**Z Z-Wave Receptacle Instruction Bulletin

Precautions

CAUTION

HAZARD OF UNINTENDED USE

This Z-Wave receptacle is intended to be used for non-critical automation activities. It is not intended to support life, safety, or medical equipment.

Failure to follow these instructions can result in personal injury or equipment damage.

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

• Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E, NOM-029-STPS or CSA Z462 or local equivalent.

• This equipment must only be installed and serviced by qualified electrical personnel.

• Turn off all power supplying this equipment before working on or inside equipment.

• Always use a properly rated voltage sensing device to confirm power is off.

• To reduce the risk of overheating and possible equipment damage, do not

install to control a receptacle, a motor-operated appliance, a fluorescent lighting fixture, or a transformer-supplied appliance.

• Use with copper wire only.

• Indoor use only.

• Replace all devices, doors, and covers before turning on power to this

equipment.

Failure to follow these instructions will result in death or serious injury.

WARNING

HAZARD OF HEAT AND FIRE DAMAGE

Read all instructions before installation. The manufacturer will not be held responsible for product damage resulting from not following the instructions.

• Wet hands are strictly prohibited.

• Work strictly according to the rated load.

• Do not continue working after self-disassembly of any nature and damage of

external forces.

Failure to follow these instructions can result in death, injury or equipment damage.

WARNING: This product can expose you to chemicals including Carbon black, which is

known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Instruction Bulletin SQR44101**Z Z-Wave Receptacle

Installation

1. Turn the power OFF at circuit breaker or fuse and test that power is off before wiring.

2. Wire the receptacle according to the wiring diagram.

3. Check that all connections are tight and no bare wires exposed.

4. Install the receptacle into the standard outlet box using the screws provided.

5. Install the plate (not included).

6. Restore power.

Operation

1. Local control: Press the program button, the appliance or device plugged into Z-Wave controlled

outlet will turn ON or OFF.

NOTE: After a power failure, the Z-Wave controlled outlet returns to the off state.

+ 4 hidden pages