Schneider Electric EN-DIN-12 Data Sheet
[ EN-DIN-12 ] Security Expert
1
DIN Rail Enclosure 1 x 2 Wall-Mount Metal Cabinet
Schneider Electric’s range of DIN Rail Enclosures combine
simplicity and robust design to provide a flexible installation
solution that is effortless to mount and maintain. The
lockable multi-tier 1 x 2 enclosure features two full size
product bays, making the it ideal for multiple mounting
configurations. The 1 x 2 DIN Rail Enclosure not only looks
great, it also enables you to get the most out of your DIN
Rail hardware.
Feature Highlights
Rail Included
Removable door
Internal cover panel
Space for finger trunking or cable tie wiring
Wide range of cable knockouts
Optional wiring accessories for plug and play module
installation, high voltage wiring
Keyway holes for simple mounting
Ventilation holes are to allow adequate air flow and to avoid
overheating.
Robust Design
Made with powder coated 1mm steel, the enclosure is structurally
robust. The enclosure is rated to IP50, where temperatures are
expected to vary between -10°C and +40°C (14°F and 104°F) and
with an average relative humidity of approximately 75 %
(non-condensing).
Easy Access and Maintenance
The enclosure has a removable door and removable cover panel
for fast simple mounting and maintenance. The cover panel
protects wiring and provides a professional look to the installation,
while still allowing easy access to the front panel LED indicators of
the DIN Rail modules installed.
You can also remove the lower rail to install a 7Ah battery.
Installation and Operation
Keyway holes on the back of the enclosure ensure simple surface
mounting on an interior wall.
Ventilation holes allow for adequate air flow to prevent
overheating.
Finger Trunking and Cable Tie Points
Space (25mm) is provided above and below DIN module locations
for finger trunking or use of the cable tie points for secure, clean
wiring. Multiple knockouts for trunking and field wiring are available
in convenient locations on the cabinet body.
Electrical Connection
Includes a knockout for a standard panel mount IEC mains voltage
connector.
Earth Connection
Bonding wire looms for earth connection to the enclosure and door
are supplied.
Tamper Switch
The enclosure includes a tamper switch used to send signals to
the monitoring station or remote computer that the enclosure has
been opened.
Included Accessories
The enclosure comes supplied with a cabinet accessory pack
including:
Cam lock
Tamper switch
Tamper bracket
Optional Accessories
The enclosure may also be used with:
A Fused Panel Mount IEC C14 Socket to allow plug and play
installation of power supply modules
A Quick Connect RS485 Daisy Chain Cable loom for easy
installation and connection of all DIN Rail modules
Schneider Electric | Building Business April 2018
Trademarks and registered trademarks are the property of their respective owners.
[ EN-DIN-12 ] Security Expert
2
Flexible Mounting Options
Featuring two full size product bays, the 1 x 2 enclosure is ideal for multiple mounting configurations:
*One product bay must be allocated for every 7Ah battery you want to fit.
Schneider Electric | Building Business April 2018
Trademarks and registered trademarks are the property of their respective owners.
Loading...